Hobie Stripping Apron user manual

Summary of the content on the page No. 1

FLOAT CAT
STRIPPING APRON
ASSEMBLY AND OPERATIONS MANUAL

Summary of the content on the page No. 2

Hobie Float Cat Stripping Apron Assembly (SEE ALSO: Large Diagrams Pg. 4) Stripping Apron Parts List Frame Rods: J-1 fiberglass rod with hinge and ferrule J-2 fiberglass rod with hinge and plain tip Apron: K-1 nylon storage bag with plastic hook and mesh K-2 nylon storage bag with D ring K1 L two 7” aluminum apron support posts with molded plastic C clamps K2 Hardware: M four clevis pins with split rings N two washers J1 J2 O two eyebolts with nuts P two Phillips head scr

Summary of the content on the page No. 3

STEP 4- Grasp K1 with zipper facing up and insert eyebolt on left side of seatback into hinge and align with hole B. Secure eyebolt to hinge with clevis pin and split ring. Repeat procedure with K2, securing hinge to eyebolt on right side of seatback with clevis pin and split ring. STEP 5- Seated between apron rods J1 and J2 and with Velcro separated, pull webbing sleeves back along each rod enough to expose the ends. Grasp exposed rods near ends, pull the rods towards you, and insert

Summary of the content on the page No. 4

4

Summary of the content on the page No. 5

Warranty Hobie Outback warranties it’s Float Cat products to be free of all defects in material and workmanship for the period of Three years from date of purchase. Upon receipt and inspection Hobie Outback will repair or replace at no charge any boats returned during the warranty period that are found defective. Please do not return the product without our prior authorization. If necessary repairs are covered by warranty, we will pay return shipping charges to any destination within th