Summary of the content on the page No. 1
Electric Powered
Pressure Washers
Operating Instructions and Parts Manual
CP5211
CP5216
CP5321
Frana ç ie s : P age Fr1 IN469800AV 6/09
es Pa:loñ Página s p1 2009 Campbell Hausfeld/Scott Fetzer
MAKES IT EASY TO DO IT LIKE A PRO chpower.com
Summary of the content on the page No. 2
Table of Contents Description 3 Initial High Pressure Rinse. . . . . . . . . . 12 Safety Guidelines 4 Adjusting the Spray Fan Angle. . . . . 12 Safety Symbols 4 Angle to the Cleaning Surface . . . . . 12 Important Safety Information 4 Distance From Cleaning Surface . . 12 Instructions Pertaining to a Risk of Fire, How to Avoid Damaging S
Summary of the content on the page No. 3
Operating Instructions and Parts Manual Electric Powered Pressure Washers Description These powerful and durable electric pressure washers are designed for industrial Specifications projects in maintenance shops, farms, stables, commercial kitchens, screen printing businesses, on heavy equipment, and more. They are ETL approved which meet UL Model CP5211 and CSA standards. 2HP CAT 2DX The heavy-duty, induction motor operates quietly, efficiently and without fuel 115 Volt emissions. It is
Summary of the content on the page No. 4
Operating Instructions and Parts Manual Important Safety Information Instru Ct Ions Pert AIn Ing to A rI sk o F FIre, ele Ctr IC sho Ck, or Injury Safety Guidelines to Persons This manual contains information This manual contains important safety, operational and maintenance information. If that is very important to know you have any questions, please call 1-800-330-0712 for customer assistance. and understand. This information is provided for SAFETY and to When using tools, basic precaut
Summary of the content on the page No. 5
Models CP5211, CP5216 and CP5321 Important Safety Information (Continued) in the pressurized system. Ensure all equipment and accessories are d. Keep clear of nozzle. NEVER direct high pressure spray at a rated to withstand the maximum working pressure of the unit. person, animal, or yourself. a. Maintain the tool with care. A properly maintained tool e. NEVER put hand or fingers over the spray tip while operating reduces the risk of problems and is easier to control. the unit. b. Ensure s
Summary of the content on the page No. 6
Operating Instructions and Parts Manual t. NEVER store the pressure washer outdoors or where it could freeze. Freezing temperatures can seriously damage the pump. ser VICe a. When servicing a tool, use only identical replacement parts. Use only authorized parts. sAVe t hese Instru Ct Ions — do n ot dIsCArd NOTE: The DANGER, WARNING, CAUTION, and NOTICE notifications and instructions in this manual cannot cover all possible conditions and situations that may occur. It must be understood by
Summary of the content on the page No. 7
Models CP5211, CP5216 and CP5321 Unpacking Contents In the C Arton u One pressure washer (pump, motor, Quick Connect and cart base) Lance u One cart handle assembly Operating u One spray gun and quick connect Instructions and Spray Parts Manual lance Gun u Two spray tips for Model CP5216 Five spray tips for Models CP5211 and CP5321 u One high pressure hose u One pack of nuts, bolts, and manuals Star Knob Carriage Bolt Spray Add It Ion Al Ite Ms n ot In Cluded Tips Pressure Washer u ANSI
Summary of the content on the page No. 8
Operating Instructions and Parts Manual Glossary Become familiar with these terms before operating the unit. CAv ITATION - The shock of thousands of bubbles collapsing inside the pump quickly, pitting metal surfaces and seals. Cavitation is caused by lack of water at the inlet of the pump. CHEMICAL INJECTOR - A chemical injector allows the chemical or soap to be injected into the water stream, making cleaning faster and easier than water alone. DETERGENT INJECTION SYSTEM - Cleaning d
Summary of the content on the page No. 9
Models CP5211, CP5216 and CP5321 U Gn et pta in cg k iT no g Know Your Pressure Washer r eCo MMended u ses For th Is Pressure W Asher Gun with u Deck Trigger u Siding Handle u Vehicles Cord / GFCI Assembly Tip Holder with Spray Tip High Pressure Hose Pump Inlet Connection for On/Off Switch Garden Hose (Rear Panel) Location of Serial Number / Product Decal (Rear Panel) Lance with Quick Connect Pump Outlet Connection for High Pressure Hose Pump Outlet Connection for High Pressure H
Summary of the content on the page No. 10
Operating Instructions and Parts Manual Assembly and Preoperation Asse Mbly And Preo Per At Ion 1. Slide the handle assembly over the lower legs of the cart base. Use the (supplied) star knob and bolts to secure the handle to the legs (See Figure 9). 2. Slide clear plastic detergent hose onto Figure 9 - Assemble handle Figure 10 - Attach suction tube to barb fitting brass hose barb (See Figure 10). 3. Insert quick connect spray tips into rubber holders on front of the placard. (See Figur
Summary of the content on the page No. 11
Models CP5211, CP5216 and CP5321 Assembly and Preoperation (Continued) t r Igger sAFety lA t Ch In the engaged position, the trigger safety latch prevents the gun from being triggered accidentally. Push the latch fully up to engage it (See Figure 16 and 17). Always engage the trigger safety latch Figure 16 - t rigger locked Figure 17 - t rigger unlocked when the unit is not in use. Operation sur FACe Pre PAr At Ion The following cleaning procedure will help you organize your cleaning task
Summary of the content on the page No. 12
Operating Instructions and Parts Manual Counter- Operation (Continued) clockwise: Lower pressure In It IAl hI gh Pressure rI nse Clockwise: Spray the cleaning surface with water to clear off any dirt or grime that may have Higher pressure collected on the surface. Doing so allows the detergent to attack the deep down dirt that has worked its way into the cleaning surface. Trigger the gun 3 to 5 times to get any trapped air out of the system. Adjusting the spray Fan Angle Two quick connect
Summary of the content on the page No. 13
Models CP5211, CP5216 and CP5321 Operation (Continued) Once applied to a cleaning surface, detergents take time to Pressure r el IeF Pro Cedure break down dirt and grime. Detergents work best when applied To reduce the risk of bodily injury or property damage, always at low pressure. follow this procedure whenever spraying is stopped, when work is completed, and before checking or repairing any part of the You can effectively clean surfaces by combining the chemical system. action of dete
Summary of the content on the page No. 14
Operating Instructions and Parts Manual Operation (Continued) 6. Disconnect the high pressure hose from the gun and drain the hose. Hold the gun and lance in a vertical position and squeeze the trigger to drain the water out. tIP s For extend Ing t he lIF e oF y our Pressure W Asher 1. Never operate the unit without water. 2. Your pressure washer is not meant to pump hot water. Never connect your pressure washer to a hot water supply as it will significantly reduce the life of the pump. 3.
Summary of the content on the page No. 15
Models CP5211, CP5216 and CP5321 Power Switch Black L1 Black White L2 Motor Cord M Green White 20 Amp Power Cord GFCI Power Cord Plug Figure 22 - Wiring diagram 115V Black Power Switch L1 Black White L2 Motor Cord M White Green 20 Amp Power Cord GFCI Power Cord Plug Figure 23 - Wiring diagram 230V www.chpower.com 15
Summary of the content on the page No. 16
Operating Instructions and Parts Manual Troubleshooting Guide sy MPto M CAuse solut Ion Low pressure and/or pump 1. Worn or wrong size tip 1. Replace with tip of proper size runs rough 2. Inlet filter on pump clogged 2. Clean. Check more frequently 3. Worn water seals, abrasives in water, 3. Check filter. Replace water seals. See service center or natural wear 4. Fouled or dirty inlet or discharge 4. Clean inlet and discharge valve assemblies. Check valves filter 5. Restricted inlet 5. Check ga
Summary of the content on the page No. 17
Models CP5211, CP5216 and CP5321 Troubleshooting Guide sy MPto M CAuse solut Ion Pressure washer does not 1. GFCI has tripped 1. Push reset button on plug start up 2. Plug is not well connected or electric 2. Check plug, socket and fuses socket is faulty 3. Extension cord too long or wire size 3. Remove extension cord too small 4. Main voltage supply too low 4. Check that main supply voltage is adequate 5. Thermal safety switch has tripped 5. Switch off unit and allow motor to cool down Motor s
Summary of the content on the page No. 18
Operating Instructions and Parts Manual For Replacement Parts or Technical Assistance, Call 1-800-330-0712 Please provide following information: Address any correspondence to: - Model number Campbell Hausfeld - Serial number (if any) Attn: Customer Service - Part description and number as shown in parts list 100 Production Drive Harrison, OH 45030 U.S.A. 19 9 27 20A 20B 20C 21 22 3 25 29 18 24 28 7 30 11 6 16 13 8 14 5 1 32 4 26 2 28 33 34 10 23 17 15 35 12 36 Figure 24 – repair Part
Summary of the content on the page No. 19
Models CP5211, CP5216 and CP5321 Replacement Parts List ref. no. description CP5211 CP5216 CP5321 Qty. 1 Motor MC031000AV MC031000AV MC031001AV 1 2 Pump PM351171SJ PM351170SJ PM351172SJ 1 3 Motor cover PM351173SJ PM351173SJ PM351174SJ 1 4 Air baffle PM351102JJ PM351102JJ PM351102JJ 1 5 Rear cover PM351103JJ PM351103JJ PM351107JJ 1 6 Switch PM351179SJ PM351179SJ PM351180SJ 1 7 Louver PM351128AV PM351128AV PM351128AV 1 8 Air Filter PM351129AV PM351129AV PM351
Summary of the content on the page No. 20
Operating Instructions and Parts Manual Reminder: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping. Warranty 1. DURATION: From the date of purchase by the original purchaser as follows: Three (3) years pressure washer unit, two (2)years pump and motor, and 90 days for wear items. 2. WHO GIVES THIS WARRANTY (WARRANTOR): Campbell Hausfeld / Scott Fetzer Company, 100 Production Drive, Harrison, OH 45030, Telephone: 1-800-330-0712 3. WHO
