Summary of the content on the page No. 1
Register and win!
www.kaercher.com
K 6.450
Operating Instructions
Before first use of the unit
read these operating instructions
and act in accordance with them.
59639200 10/10
Summary of the content on the page No. 2
Contents Symbols on the machine General information 2 The high pressure jet may not Description of the Appliance 3 be directed at persons, ani- mals, live electrical equipment Safety instructions 4 or at the appliance itself. Pro- Operation 6 tect the appliance against frost. Transport 9 Storage 9 Environmental protection Maintenance and care 10 The packaging material can be recy- Troubleshooting 10 cled. Please do not place the packag- Customer Service 11 ing into the ordinary refuse for disp
Summary of the content on the page No. 3
Description of the Appliance 1 Coupling element for water connection 12 Storage hook for mains connection cable 2 Water connection with integrated sieve 13 Mains cable with mains plug 3 Appliance switch "0/OFF“/ „I/ON“ 14 Detergent reservoir with locking lid 4 High pressure hose 15 Wheels 5 Dosage regulator for detergent 16 Trigger gun 6 Storage for trigger gun 17 Lock trigger gun 7 High-pressure hose drum 18 Key to detach the high-pressure hose 8 Transport handle from the trigger gun 9 Hand cr
Summary of the content on the page No. 4
oil. The spray mist thus generated is Safety instructions highly inflammable, explosive and poi- sonous. Do not use acetone, undiluted Danger Never touch the mains plug and the acids and solvents as they are damag- socket with wet hands. ing to the materials from which the ap- The appliance must not be used if the pliance is made. power cord or important parts of the ap- Warning pliance, e.g. high-pressure hoses, trig- The mains plug and the coupling of an ger gun or safety devices are
Summary of the content on the page No. 5
Caution Safety Devices In case of extended downtimes, switch the appliance off at the main switch / ap- Caution pliance switch or remove the mains Safety devices protect the user and must plug. not be modified or bypassed. Do not operate the appliance at temper- Power switch atures below 0 °C. The appliance switch prevents unintention- Observe a distance of at least 30 cm al operation of the appliance. when using the jet to clean painted sur- Lock trigger gun faces to avoid damaging paintwo
Summary of the content on the page No. 6
Note: Make sure the connection nipple Operation is aligned correctly. Illustrations on Page 12 Check the secure connection by pulling on the high pressure hose. Before Startup Mount loose parts delivered with appliance Water supply prior to start-up. Warning Install the storage for hand-spray gun According to the applicable regula- Illustration tions, the appliance must never be Place the bottom holder into the recess- used on the drinking water supply es and push forward until it audib
Summary of the content on the page No. 7
Tip: If you are not using this accessory, coil Start up a hose into the bucket and ensure that you only use a standard hose clamp to connect Caution to the pressure washer. Dry runs lasting longer than two minutes CLICK FITTINGS MUST NOT BE USED! lead to damages to the high pressure pump. If the appliance does not build up pressure within two minutes, switch it off and proceed as instructed in the Chapter "Troubleshooting". Illustration Push the spray lance into the trigger gun and fa
Summary of the content on the page No. 8
Note: Suitable for working with detergent; Recommended cleaning method for this, turn the spray lance to the "Mix" po- Spray the detergent sparingly on the sition. dry surface and allow it to react, but not Set the dosage regulator to the desired to dry. suction volume for detergent. Spray off loosened dirt with the high- pressure jet. Spray lance with Dirtblaster For particularly dirty items or areas. Interrupting operation Caution Car tyres, paint or sensitive surfaces such Release the
Summary of the content on the page No. 9
Transport Storage Caution Caution In order to prevent accidents or injuries, In order to prevent accidents or injuries, keep in mind the weight of the appliance keep in mind the weight of the appliance during transport (see Specifications). when selecting a storage location for it (see Specifications). When transporting by hand Storing the Appliance Pull the appliance by its transport han- dle. Park the machine on an even surface. Wind the entire high pressure hose onto When transporting
Summary of the content on the page No. 10
Maintenance and care Troubleshooting You can rectify minor faults yourself with Danger Turn off the appliance and remove the the help of the following overview. mains plug prior to any care and mainte- If in doubt, please consult the authorized nance work. customer service. Danger Care Turn off the appliance and remove the mains plug prior to any care and mainte- Prior to longer periods of storage, e.g. in nance work. the winter: Repair works may only be performed by the Illustration
Summary of the content on the page No. 11
No detergent infeed Technical specifications Use spray lance with pressure regula- tion (Vario Power). Electrical connection Turn the spray lance to "Mix" position. Voltage 230-240 V Check the settings at the dosage regu- 1~50 Hz lator for detergent. Connected load 2,2 kW Check the detergent suction hose for Protection class IP X5 kinks. Protective class I Mains fuse (slow-blow) 16 A Customer Service Water connection Australia Max. feed pressure 0,6 MPa KÄRCHER Pty. Ltd. Max. feed temperatur
Summary of the content on the page No. 12
Assembly 12 English
Summary of the content on the page No. 13
Assembly English 13
Summary of the content on the page No. 14
Notes 14 English
Summary of the content on the page No. 15
Spare Parts English 15
Summary of the content on the page No. 16
