Summary of the content on the page No. 1
R
Room Air Conditioner
INSTALLATION AND OPERATING INSTRUCTIONS
Models: CW-XC145HU
CW-XC185HU
CW-XC245HU
Please read these operating instructions thoroughly
before using your air conditioner and keep for future
reference.
For assistance, please call: 1-800-211-PANA(7262) or
Register your product at : http://www.panasonic.com/register
CW382820391S
Summary of the content on the page No. 2
Safety Precautions Safety Precautions .............3 FOR YOUR RECORDS Staple your receipt to this page in case you need it later. Write down the model and serial numbers here: Model # Serial # You can find them on a label on the side of each unit. Dealer's Name Date Purchased About the Controls on the Air Conditioner Controls..............................5 READ THIS MANUAL Remote Controller ..............6 Ventilation ..........................7 Inside you will find many helpful hints on how to
Summary of the content on the page No. 3
Safety Precautions Safety Precautions To prevent injury to the user or other people and property damage, the following instructions must be followed. Incorrect operation due to ignoring of instruction will cause harm or damage. The seriousness is classified by the following indications. WARNING : This symbol indicates the possibility of death or serious injury. This symbol indicates the possibility of injury or damage to CAUTION : property only. Meanings of symbols used in this manual are a
Summary of the content on the page No. 4
When the air filter is to be Do not clean the air Ventilate well when used conditioner with water. removed, do not touch the together with a stove, etc. metal parts of the unit. • It may cause an injury. • An oxygen shortage may occur. • Water may enter the unit and degrade the insulation. It may cause an electric shock. When the unit is to be Do not put a pet or house Do not use for special cleaned, switch off, and turn plant where it will be exposed purposes. off the breaker. to direct air flo
Summary of the content on the page No. 5
About the Controls on the Air Conditioner About the Controls on the Air Conditioner Controls 5 7 2 1 4 3 6 OPERATION ON/OFF TIMER • To turn the air conditioner ON, push the button. To turn You can set the time when the unit will turn on or turn off the air conditioner OFF, push the button again. automatically by pressing the timer button. If the unit is • This button takes priority over any other buttons. operating, this button controls the time it will be turned off. • When you first turn it on
Summary of the content on the page No. 6
Remote controller Precaution: The Remote Controller will not function properly if strong light strikes the sensor window of the air conditioner or if there are obstacles between the Remote Controller and the air conditioner. OPERATION 1 TEMP 3 AIR TIMER SWING 5 6 MODE FAN SPEED 2 4 ECONOMY 7 - STARTING OPERATION OPERATION • Every time you push this button, when the air • To turn the air conditioner ON, push the button. conditioner is not operating, timer is set as follows. To turn the air condi
Summary of the content on the page No. 7
About the Controls on the Air Conditioner F hr TIME SE RT OPERATION TEMP/TIMER SET/ OFF/ON CANCEL C FO AO NL MODE AIR SWING ECONOMY HIGH M LE OD W FAN SPEED Wireless Remote Control Additional controls and important information. Ventilation The ventilation lever must be in the CLOSE position in order to maintain the best cooling conditions. When fresh air is necessary in the room, set the ventilation lever to the OPEN position. CLOSE VENT OPEN The damper is opened and room air is drawn out. Part
Summary of the content on the page No. 8
Care and Maintenance TURN THE AIR CONDITIONER OFF AND REMOVE THE PLUG FROM THE POWER OUTLET. Air Filter Cleaning The air filter behind the front grille should be checked and cleaned at least once every 2 weeks or more often if necessary. TO REMOVE: 1. Open the inlet grille upward by pulling out the bottom of the inlet grille or downward by pulling out the top of the inlet grille. 2. Using the tab, pull up slightly on the filter to release it and pull it down or up. 3. Clean the filter with warm
Summary of the content on the page No. 9
Features and Installation Features Learning parts name prior to installation will help you understand the installation procedure. Features VERTICAL AIR DEFLECTOR (HORIZONTAL LOUVER) HORIZONTAL AIR DEFLECTOR (VERTICAL LOUVER) AIR DISCHARGE CABINET FRONT GRILLE AIR FILTER AIR INTAKE (INLET GRILLE) BRACE COMPRESSOR CONDENSER EVAPORATOR BASE PAN CONTROL BOARD POWER CORD REMOTE CONTROLLER 9
Summary of the content on the page No. 10
Installation How to Install the Unit INSIDE OUTSIDE Fence Awning Foam Heat 1/4 Bubble Radiation Cooled Air About 1/2" Over 20" Level 1. To prevent vibration and noise, make sure the unit is installed securely and firmly 2. Install the unit where the sunlight does not shine directly on the unit. 3. The outside of the cabinet must extend outward for at least 30.5 cm(12") and there should be no obstacles, such as a fence or wall, within 50.8 cm(20") from the back of the cabinet because it will prev
Summary of the content on the page No. 11
Features and Installation Installation Kits Contents Foam strip Foam-PE (Plain-Back) (Adhesive-Backed) Foam-PE (Adhesive-Backed) Left frame curtain Drain pipe Window locking bracket Right frame curtain Sill bracket(2) Support bracket(2) Type A (14) Type B (7) Type C (5) Type D (2) Carriage Bolt (2) Lock Nut (4) Top retainer bar is in product package. 11
Summary of the content on the page No. 12
Suggested Tool Requirements SCREWDRIVER(+, -), RULER, KNIFE, HAMMER, PENCIL, LEVEL PREPARATION OF CHASSIS Shipping screws 1. Remove the screws which fasten the cabinet at both sides and at the back.(See Fig.1) 2. Slide the unit out from the cabinet by gripping the base pan handle and pulling forward while bracing the cabinet.(See Fig. 2) 3. Cut the window sash seal to the proper length. Peel off the backing and attach the Foam-PE to the Fig. 1 underside of the window sash.(See Fig. 3) 4. Remove
Summary of the content on the page No. 13
Features and Installation Cabinet Installation 1. Open the window. Mark a line on the center of the window stool between the side Sill Bracket Support window stop moldings. Bracket Loosely attach the sill bracket to the support Carriage Lock nut Bolt bracket using the carriage bolt and the lock (Type M) nut. (See Fig. 5) Fig. 5 2. Attach the sill bracket to the window sill using the screws (Type B). Machine screw (Type D) Carefully place the cabinet on the window and lock nut Cabinet stool an
Summary of the content on the page No. 14
5. Pull each Frame curtain fully to each window sash track, and pull the bottom window sash down behind the Top retainer bar until it meets. 6. Attach each Frame curtain the window sash by using screws (Type C.) (See Fig. 9) Fig. 9 7. Slide the unit into the cabinet.(See Fig. 10) CAUTION: For security purpose, reinstall screws at cabinet's sides. Power Cord Screw Screw Fig. 10 8. Cut the Foam-strip to the proper length and Foam-Strip insert between the upper window sash and the lower window sa
Summary of the content on the page No. 15
Features and Installation Electrical Data Power cord may include a current interrupter device. A test and reset button is provided on the plug case. The device should be tested on a periodic basis by first pressing the TEST button and then the RESET button. If the TEST button does not trip or if the RESET button will not stay engaged, discontinue use of the air conditioner and contact a qualified service technician. Damaged power supply cord must be replaced with a new power supply cord obtaine
Summary of the content on the page No. 16
Electrical Safety Because of potential safety hazards, we strongly IMPORTANT discourage the use of an adapter plug. However, if (PLEASE READ CAREFULLY) you wish to use an adapter, a TEMPORARY CONNECTION may be made. Use UL-listed FOR THE USER'S PERSONAL SAFETY, THIS adapter, available from most local hardware stores APPLIANCE MUST BE PROPERLY GROUNDED (Fig. 16). The large slot in the adapter must be aligned with the large slot in the receptacle to The power cord of this appliance is equipped wi
Summary of the content on the page No. 17
Before you call for service... Before you call for service... Troubleshooting Tips Save time and money! Review the chart below first and you may not need to call for service. Normal Operation • You may hear a pinging noise caused by water being picked up and thrown against the condenser on rainy days or when the humidity is high. This design feature helps remove moisture and improve efficiency. • You may hear the thermostat click when the compressor cycles on and off. • Water will collect in the
Summary of the content on the page No. 18
Precauciones Importantes de PARA SU INFORMACION Seguridad Precauciones Importantes Escriba aquí los números de serie y modelo de las de seguridad ....................19 unidades exterior e interior: Nº de Modelo Nº Serie Los números figuran en una etiqueta en el lateral de cada unidad. Distribuidor Fecha de compra Instrucciones de Funcionamiento LEA ESTE MANUAL Controles...........................21 Ventilación.........................23 • Aquí encontrará numerosas sugerencias sobre cómo Como
Summary of the content on the page No. 19
Precauciones Importantes de seguridad Precauciones Importantes de Seguridad Para prevenir tanto lesiones al usuario u otras personas como daños materiales, es preciso seguir estas instrucciones. El manejo incorrecto debido a la inobservancia de estas instrucciones puede causar lesiones o daños cuya gravedad está clasificada en las siguientes indicaciones. ADVERTENCIA Este símbolo indica la posibilidad de lesiones mortales o graves. Este símbolo indica la posibilidad de lesiones o daños PRECAUC
Summary of the content on the page No. 20
PRECAUCION Cuando se vaya a quitar el No limpie el acondicionador Ventile bien cuando utilice el filtro de aire no toque las de aire con agua. acondicionador junto con partes metálicas de la unidad una estufa, etc. interior. • Esto podría causar heridas. • El agua podría entrar en la • En este caso tal vez se produzca unidad y degradar el aislamiento. una falta de oxígeno. También podría causar una sacudida eléctrica. Cuando limpie la unidad, NO ponga un animal doméstico No lo utilice para propó
