iOptron 8032 user manual

Device: iOptron 8032

Category: Telescope

Manufacturer: iOptron

Size: 0.24 MB

Added : 7/19/2013

Number of pages: 8

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for iOptron 8032. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with iOptron 8032.

For your convenience

If looking through the iOptron 8032 user manual directly on this website is not convenient for you, there are two possible solutions:

Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual iOptron 8032 on full screen, use the button Fullscreen.
Downloading to your computer - You can also download the user manual iOptron 8032 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.

iOptron 8032 User manual - Online PDF

« Page 1 of 8 »

Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual iOptron 8032 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to iOptron 8032. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents

Summary of the content on the page No. 1

®

®
iOptron MiniPier
Instruction Manual

Product #8032

Summary of the content on the page No. 2

MiniPier 8032 ® 1 iOptron MiniPier is designed for iOptron GOTO mounts, which includes iEQ45, iEQ30 , MiniTower, MiniTower II, or MiniTower Pro mount. It can be used with a MiniTower, MiniTower Pro, or iEQ45 tripod. 2 Parts include : 1. 1x MiniPier Body 2. 1x iEQ45 center stud and alignment peg 3. 2x M8 hex head screws for iEQ tripod mounting 4. 1x M12 Center Bolt with turning lever for MiniTower/MiniTower Pro mounting 5. 3x M10 hex head screws for MiniTower tripod mounting 6. 1X i

Summary of the content on the page No. 3

MiniPier for iEQ45/iEQ30 The assemble example shown here is for installing a MiniPier onto an iEQ45 tripod. For an iEQ30 mount, either an iEQ45 tripod or a MiniTower/MiniTower Pro tripod is needed. 1. Extend the tripod legs and adjust the height of the tripod. Secure the tripod. Remember that the MiniPier will add 8 inch in height. Remove the alignment peg from the iEQ45 tripod head. 2. Release three locking screws located at the bottom of the MiniPier body. Put the Base Flange onto

Summary of the content on the page No. 4

Example: an iEQ45 mount on a MiniPier with an iEQ45 tripod

Summary of the content on the page No. 5

Example: an iEQ30 mount on a MiniPier with an iEQ45 tripod (Note: a special top flange with iEQ30 mounting holes is needed)

Summary of the content on the page No. 6

Mini Pier for MT/MT2/MTP The assemble example shown here is to installing a MiniPier onto a MiniTower tripod. The procedure will be similar for installing a MiniPier onto a MiniTower Pro tripod. 1. Extend the tripod legs and adjust the height of the tripod. Remember that the MiniPier will add 8 inch in height. 2. Unthread and remove the stainless steel nut from MT tripod rod. 3. Thread the tripod rod all the way up into the threaded hole on the tripod head and tighten it. Lock

Summary of the content on the page No. 7

5. Remove iEQ center stud and alignment peg. Insert the MiniTower Securing Bolt through the hole on the top mounting flange. Install the Turning Lever. 6. Put the MiniPier body onto the Base Flange and secure it using three locking screws. 7. Final adjust the tripod height and level the tripod with MiniPier before mounting the MiniTower mount. 8. Install 3 MiniTower level adjustment screws and threaded in about half of the threads. Put the MiniTower on to it. Level it. Thre

Summary of the content on the page No. 8

Example: An MiniTower on a MiniPier with a MiniTower tripod

Alternative user manuals

#	User manual	Category	Download
1	iOptron ASTROBOY #9401 User manual	Telescope	26
2	iOptron 6002 User manual	Telescope	6
3	iOptron ASTROBOY #9402 User manual	Telescope	20
4	iOptron ASTROBOY #9404 User manual	Telescope	17
5	iOptron ASTROBOY 70E User manual	Telescope	4
6	iOptron GO2NOVA 3100 User manual	Telescope	9
7	iOptron ASTROBOY #9403 User manual	Telescope	2
8	iOptron GoToNova 8401 User manual	Telescope	41
9	iOptron 9802 User manual	Telescope	2
10	iOptron IE1300 User manual	Telescope	1
11	iOptron GoToNova 8402A User manual	Telescope	27
12	iOptron 70AZ User manual	Telescope	3
13	iOptron IEQ30 User manual	Telescope	38
14	iOptron 8000D User manual	Telescope	0
15	iOptron 8500 User manual	Telescope	0
16	Edelbrock 2103 User manual	Telescope	1
17	ADIC 1.3 User manual	Telescope	1
18	ATN Mk6500 User manual	Telescope	8
19	ATN Night Patriot User manual	Telescope	20
20	Avanti MAGIC COOL CF51P User manual	Telescope	3