Fellowes DM65C user manual

Summary of the content on the page No. 1

PAPER SHREDDER
Personal Series
MODELS
DM65C
PRODUCT USAGE GUIDE
DM65C
Sheet capacity*: 7
Shred type: Confetti
Shred size: 5/32" x 1-3/8"
Entry width: 9"
Recommended use: 25-50 shredding passes per day
Maximum running time: 10-12 min. on/20 minutes off
*Sheet capacity measured with 20 lb., 8-1/2" x 11" paper with the shredder operating at rated voltage. Different paper weights, humidity, and
electrical currents will affect capacity.
PLEASE READ AND SAVE THIS MANUAL WITH YOUR ORIGINAL RECEIPT
Cust

Summary of the content on the page No. 2

IMPORTANT SAFEGUARDS PARTS OF THE SHREDDER D C E • NEVER insert hands or fingers into paper entry as serious personal injury may result. • THIS MACHINE IS NOT A TOY. Keep children and pets away from B shredder AT ALL TIMES as serious injury may result. Always unplug F shredder when not in use. • Keep loose objects (jewelry, ties, long hair) away from shredder. These items and others like them may cause serious injury if they G accidentally fall into the paper entry. A A. Basket E. Power swit

Summary of the content on the page No. 3

the shredder's red LED will light and the shredder will automatically OPERATION stop until the jam is cleared. This product features an auto-start sensor. This To clear a jam: sensor will turn on the cutting blades whenever 1. Move the power switch to the REVERSE (R) position. (NOTE: If anything is inserted into the paper entry (while the power switch is in waste basket is full, empty it before clearing jam.) The shredder the AUTO position). For the safety of pets and children, we recom- will

Summary of the content on the page No. 4

TROUBLESHOOTING LIMITED WARRANTY Fellowes warrants all the cutting cylinders of the machine to Shredder will not operate. a. Shredder is not plugged in. be free of defects in material and workmanship for 5 years b. Power switch is in the OFF (O) position. from the date of Move switch to AUTO (I) position. purchase by the original consumer. Fellowes warrants all other c. Shredder is jammed. See "Clearing a parts of the machine to be free of defects in material and Jam" section. workmanship for