Summary of the content on the page No. 1
®
®
Powershred
Console Shredders
220/220CC
280/280CC
320/320CC
380/380CC
Operating Instructions
A
Mode d’emploi
B
Instrucciones de funcionamiento
C
Bedienungsanleitung D
E
Bedieningsinstructies
F
Istruzioni sul funzionamento
Summary of the content on the page No. 2
English Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Parts Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6 Installation, Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Checklist for Inoperative Machine . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 3
Important Safety Caution 1. This shredder utilizes a safety interlock switch which Instructions lights the red indicator light and stops power to the 1. Read all instructions before use. motor when the door is opened. Do not attempt to 2. Save these instructions for later use. override this safety feature. 3. Follow all warnings and instructions marked on the 2. The electronic circuitry in this shredder performs product. several functions: 4. Unplug this product from the wall outlet before • Sen
Summary of the content on the page No. 4
Parts Identification 1) Indicator Lights 5) Cabinet Access Door 2) Rocker Switch 6) Paper Feed Opening 3) Cover 7) Power Supply Receptacle 4) Cabinet 8) Circuit breaker (models 320-380 only) A B C D E F 4
Summary of the content on the page No. 5
Technical Specifications Model 220 220CC 280 280CC Cutting Style Strip Cross Cut Strip Cross Cut Shred Size Inches 1/4 5/32 5/32 x 1-1/4 1/4 5/32 5/32 x 1-1/4 Millimeters 5.99 3.9 3.9 x 32 5.99 3.9 3.9 x 32 Sheet Capacity 8-1/2” x 11” 20 lb. 14-16 12-14 8-10 14-16 12-14 8-10 A4/70gr 16-18 14-16 9-11 16-18 14-16 9-11 Speed 115V, 60Hz 22 FPM 22 FPM 22 FPM 22 FPM Entry Width Inches 10 10 15 15 Millimeters (254) (254) (381) (381) A Motor Power 120V 1/4 hp 1/4 hp 220-240V (0.15 kW) (0.15 kW) Input v
Summary of the content on the page No. 6
Technical Specifications Model 320 320CC 380 380CC Cutting Style Strip Cross Cut Strip Cross Cut Shred Size Inches 1/4 5/32 5/32 x 1-1/4 1/4 5/32 5/32 x 1-1/4 Millimeters 5.99 3.9 3.9 x 32 5.99 3.9 3.9 x 32 Sheet Capacity 8-1/2” x 11”, 20 lb. 18-20 16-18 10-12 18-20 16-18 10-12 A4/70gr 20-22 18-20 12-14 20-22 18-20 12-14 Speed 115V, 60Hz 22 FPM 22 FPM 22 FPM 22 FPM Entry Width Inches 10 10 15 15 Millimeters (254) (254) (381) (381) A Motor Power 120V 2/5 hp 2/5 hp 220-240V (0.28 kW) (0.28 kW) B
Summary of the content on the page No. 7
Installation Operation • Plug one end of the enclosed power cord (inside the Read operating instructions before waste box) into the power supply receptacle in the putting shredder into back of the shredder. operation. • Screw casters into the nuts provided on the underside of the shredder. • Operate this product only from the type of power source indicated on the marking label. Insert power cord into power • Install the paper shredder so that the plug is easily supply receptacle on the back of
Summary of the content on the page No. 8
Checklist for Inoperative Machines Overheated: All Machines • If the motor is overheated, switch the machine off and allow motor to cool down for approximately 15- If no indicator lights are lit: 20 minutes. • Make sure the plug is securely inserted in the receptacle on the back of the machine and into the wall outlet. 320,320CC, 380, 380CC • Make sure the shredder is on (switch in “I” position). If no lights are on: • Make sure the circuit breaker is not open. (press to If both the red and gree
Summary of the content on the page No. 9
of one year from the date of purchase by the Maintenance original consumer. At it’s option, Fellowes will (Cross Cut Units Only) repair or replace without charge for material or Shredder Oiling Instructions labor, any component found to be defective during When shredding capacity drops, noise increases, the warranty period. Additionally, the cutting or if the cutting cylinders stop with a squeak cylinders are warranted for 5 years from the or a rubbing sound, the cutters should be original purch
Summary of the content on the page No. 10
Declaration of Conformity Fellowes Manufacturing Company Doncaster Road, Kirk Sandall Doncaster, South Yorkshire, DN31H England declares that the product Models Powershred 220, 220CC, 280, 280CC, 320, 320CC, 380 and 380CC, conform with the requirements of the Low Voltage Directive (73/23 EEC) and the Electromagnetic Compatibility Directive (89/336 EEC) and the following harmonized European Normes (EN Standards) and IEC Standards. Safety: EN60950 ‘Information Technology Equipment’ EMC: Standar
Summary of the content on the page No. 11
A B C Contact For Service: United States 1-800-955-0959 Australia (In Melbourne) (03) 9330-3211 D (Outside Melbourne) 1-800-331-177 Canada 1-800-665-4339 United Kingdom 01302-885 331 Japan +81-3-5496-2401 E Benelux +31-(0)347-377988 Italy +39-071730041 Germany +49-5131-49770 France +33-(0)4-72-08-25-45 F 1789 Norwood Avenue • Itasca, Illinois 60143-1095 630-893-1600 • Customer Service 1-800-955-0959 ® http://www.fellowes.com Australia Benelux Canada Deutschland France Italy Japan United Kingdom
