Summary of the content on the page No. 1
Operating Instructions
HOB
Contents
GB
Installation, 2-5
Positioning
GB
Gas connection
Data plate
English,1
Burner and nozzle specifications
Electrical connection, 6
Description of the appliance, 7
Overall view
Start-up and use, 8
Practical advice on using the burners
Precautions and tips, 9
General safety
GF640
Disposal
GF640X
Recycling & Disposal Information
GF640K
GF640W
Maintenance and care, 10
GF641 Switching the appliance off
Cleaning the appliance
GF641X
Gas tap maintenance
KSG 641 X
Trou
Summary of the content on the page No. 2
Installation ! Before operating your new appliance please read Adjacent Room to be The system can also provide Room Vented GB this instruction booklet carefully. It contains the air needed for combustion important information for safe use, installation and indirectly, i.e. from adjacent care of the appliance. rooms fitted with air circulation tubes as described above. ! Please keep these operating instructions for future However, these rooms must reference. Pass them on to possible new owners of
Summary of the content on the page No. 3
45 mm. Where a hob is installed above an oven without a 555 mm GB forced ventilation cooling system, adequate ventilation must be provided inside the cabinet by means of air holes through which air can pass (see figure). Hook fastening diagram Gas connection The appliance should be connected to the main gas Hooking position Hooking position supply or to a gas cylinder in compliance with for top H=30 mm for top H=40 mm current national regulations. Before carrying out the connection, make sure th
Summary of the content on the page No. 4
Checking the tightness of the connection ! If the appliance is connected to liquid gas, the GB regulation screw must be fastened as tightly as ! When the installation process is complete, check possible. the pipe fittings for leaks using a soapy solution. Never use a flame. ! Once this procedure is finished, replace the old Adapting to different types of gas rating sticker with one indicating the new type of gas To adapt the hob to a different type of gas other used. Stickers are available from
Summary of the content on the page No. 5
Burner and nozzle specifications GB Table 1 Liquid Gas Natural Gas Burner Diameter Thermal Power By-pass Nozzle Flow* Nozzle Flow* Nozzle Flow* (mm) kW (p.c.s.*) 1/100 1/100 g/h 1/100 l/h 1/100 l/h (mm) Nom. Red. (1) (mm) *** ** (mm) (mm) Reduce Fast 100 2.60 0.70 41 39 80 189 186 110 248 135 248 (RR) Semi Fast 75 1.65 0.40 30 28 64 120 118 96 157 105 157 (Medium
Summary of the content on the page No. 6
Electrical Connection ! THIS APPLIANCE MUST BE EARTHED. ! The wires in the mains lead are coloured in GB The hob is designed to work with alternating current, accordance with the following code: the supply voltage and frequency indicated on the Green & Yellow - Earth rating plate (situated under the hob). Make sure that Blue - Neutral the local supply voltage corresponds to the voltage Brown - Live indicated on the rating plate. As the colours of the wires in the mains lead may not correspond wi
Summary of the content on the page No. 7
Description of the appliance Overall view GB GAS BURNERS Support Grid for COOKWARE Control Knobs for Control Knobs for GAS BURNERS GAS BURNERS Ignition Button for GAS BURNERS * SAFETY DEVICES * Ignition for GAS BURNERS * • GAS BURNERS differ in size and power. Use the • GAS BURNER ignition* enables a specific burner diameter of the cookware to choose the most to be lit automatically. appropriate burner to cook with. • SAFETY DEVICE* stops the gas flow if the flame • Control Knobs for GAS BURNER
Summary of the content on the page No. 8
Start-up and use ! The position of the corresponding gas burner or When the contents of the pan reach boiling point, GB electric hotplate* is shown on every knob. turn the knob to minimum. Burner Ø Cookware Diameter (cm) Gas burners Each burner can be adjusted to one of the following Reduced Fast (RR) 22 - 24 settings using the corresponding control knob: Semi Fast (S) 16 - 20 Off Auxiliary (A) 10 - 14 Triple Crown (TC) 24 - 26 Maximum Minimum To identify the type of burner, refer to the d
Summary of the content on the page No. 9
Precautions and tips ! This appliance has been designed and Do not use unstable or deformed pans. GB manufactured in compliance with international safety The appliance is not intended to be operated standards. The following warnings are provided for by means of an external timer or separate safety reasons and must be read carefully. remote-control system. General safety Disposal This is a class 3 built-in appliance. When disposing of packaging material: observe Gas appliances require r
Summary of the content on the page No. 10
Maintenance and care Gas tap maintenance Switching the appliance off GB Over time, the taps may become jammed or difficult Disconnect your appliance from the electricity to turn. If this happens, the tap must be replaced. supply before carrying out any work on it. ! This procedure must be performed by a qualified technician authorised by the Cleaning the appliance manufacturer. ! Do not use abrasive or corrosive detergents such as stain removers, anti-rust products, powder detergents or sponges
Summary of the content on the page No. 11
Troubleshooting It may happen that the appliance does not function properly or at all. Before calling the service centre for GB assistance, check if anything can be done. First, check to see that there are no interruptions in the gas and electrical supplies, and, in particular, that the gas valves for the mains are open. Problem Possible causes/Solution The burner does not light or the flame is not The gas holes on the burner are clogged. even around the burner. All the movable parts that ma
Summary of the content on the page No. 12
After Sales Service GB No one is better placed to care for your Hotpoint appliance during the course of its working life than us - the manufacturer. Essential Contact Information Hotpoint Service We are the largest service team in Europe offering you access to 400 skilled telephone advisors and 1100 fully qualified engineers on call to ensure you receive fast, reliable, local service. UK: 08709 066 066 Republic of Ireland: 0818 313 413 www.hotpointservice.co.uk Please note: Our advisors will req
Summary of the content on the page No. 13
Guarantee GB 12 Months Parts and Labour Guarantee Your appliance has the benefit of our manufacturers guarantee, which covers the cost of breakdown repairs for twelve months from the date of purchase. This gives you the reassurance that if, within that time, your appliance is proven to be defective because of either workmanship or materials, we will, at our discretion, either repair or replace the appliance at no cost to you. This guarantee is subject to the following conditions: - The applianc
Summary of the content on the page No. 14
Notes GB PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24 14
Summary of the content on the page No. 15
GB PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24 15
Summary of the content on the page No. 16
Notes 02/2012 - 195036404.06 XEROX FABRIANO GB PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24 16
