Regency U32-NG5 user manual

Summary of the content on the page No. 1

Gas Inserts
Gas Inserts
U32 Regency Gas Insert
U32 Regency Gas Insert
Model U32-NG5 U32-LP5
Fuel Type Natural Gas Propane
Minimum Supply Pressure 5” W.C. (1.25 kPa) 12” W.C. (2.99 kPa)
Manifold Pressure - High 3.8” W.C. (0.95 kPa) 11” W.C. (2.74 kPa)
Manifold Pressure - Low 1.1” W.C. (0.27 kPa) 2.9” W.C. (0.72 kPa)
Orifi ce Size -Altitude 0-4500 ft. #37 DMS #52 DMS
Minimum Input 15,300 BTU/h 15,000 BTU/h
Altitude 0-4500 ft. (0-1372m) (4.48 kW) (4.40 kW)
Maximum Input 30,000 BTU/h 30,000 BTU/h
Al

Summary of the content on the page No. 2

Gas Inserts U32 Regency Gas Insert Clearances Combustible Mantels Because of the extreme heat this fi replace emits, the mantel Unless otherwise stated the clearances listed below are Minimum clearances are critical. Combustible mantel clearances from top of distances to combustible materials. Please Note: A major cause the louvers are shown in the diagram below. Mantel may be installed of chimney related fi res is due to a failure to maintain required anywhere in the shaded area or higher.