Summary of the content on the page No. 1
HOMEOWNER'S CARE AND
OPERATION INSTRUCTIONS
DIRECT VENT
®
ELITE SERIES
VENTED GAS FIREPLACE HEATERS - DIRECT VENT MODELS
WARNINGS
P/N 875,021M REV. G 03/2007
• Hot! Do not touch! The glass and
surfaces of this appliance will be hot
MODELS
during operation and will retain heat
for a while after shutting off the appli-
Ms illivolt Models Electronic Model
ance. Severe burns may result.
EE DV3530CNM EDV3530CN
EE DV4035CNM EDV4035CN
• Carefully supervise children in the
EE DV4540CNM EDV4540CN
sa
Summary of the content on the page No. 2
CONGRATULATIONS! WARNING: IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE In selecting this LENNOX Direct-Vent Gas Appliance you have chosen the finest and most OR MAINTENANCE CAN CAUSE INJURY dependable fireplace to be found anywhere. A beautiful, prestigious, alternative to a OR PROPERTY DAMAGE. REFER TO wood burning fireplace. Welcome to a Family of tens of thousands of satisfied LENNOX THIS MANUAL. FOR ASSISTANCE OR Fireplace Owners. ADDITIONAL INFORMATION CONSULT A QUALIFIED INST
Summary of the content on the page No. 3
These appliances are designed to operate Test gage connections are provided on the WARNING: CHILDREN AND ADULTS front of the millivolt gas control valve (identi- on natural or propane gas only. SHOULD BE ALERTED TO THE HAZ- fied OUT for the manifold side and IN for inlet Millivolt Models - pressure. A ¹⁄₈" NPT test gage connection is ARDS OF HIGH SURFACE TEMPERA- Input of millivolt models is shown in the fol- provided on the electronic gas control valve TURES. USE CAUTION AROUND THE lowing tab
Summary of the content on the page No. 4
O I O L I P T O IGNITER OFF ON CONTROL it TPTH TP TH L I P F LO F Millivolt Appliances - If your electronic appliance is equipped with an optional remote wall switch or remote con- To light millivolt appliances refer to the de- trol kit the appliance main burner may be tailed lighting instructions found on page 11 turned on and off with the wall switch or (English) and page 12 (French). Millivolt ap- remote control. pliance lighting instructions may also be found on the pull out lighting instruc
Summary of the content on the page No. 5
3. Keep lower control compartment clean by Maintenance WARNING: HANDLE THIS GLASS WITH vacuuming or brushing at least twice a year. EXTREME CARE! DO NOT STRIKE DOOR. More frequent cleaning may be required due to The appliance and venting system should be excessive lint from carpeting, bedding materi- TEMPERED GLASS IS SUSCEPTIBLE TO thoroughly inspected before initial use and at als, etc. It is important that control compart- DAMAGE – DO NOT SCRATCH OR HANDLE least annually by a qualified servi
Summary of the content on the page No. 6
Maintenance Schedule Annually (Before the onset of the Burning Season) Maintenance Task Accomplishing Person Procedure Inspecting/Cleaning Burner, Logs Qualified Service Technician Inspect valve and ensure it is properly operat- and Controls ing. Check piping for leaks. Vacuum the control compartment, fireplace logs and burner area. Check Flame Patterns and Flame Height Qualified Service Technician Refer to Figures 6 (EDV3530), 7 (EDV4035) or 8 (EDV4540) on page 7 and verify the flame pattern
Summary of the content on the page No. 7
Adjustment Burner Adjustments Lower Compartment Door and Hinge The following paragraphs address burner ad- Top Flange CAUTION: THE ADJUSTMENT ROD AND Glass Door Frame justment concerns and procedures. NEARBY APPLIANCE SURFACES ARE HOT. Glass Door EXERCISE CAUTION TO AVOID INJURY WHILE Flame Appearance and Sooting Modesty Panel ADJUSTING FLAME APPEARANCE. Proper flame appearance is a matter of taste. To adjust the flame, move the adjustment rod Generally most people prefer the warm glow of (locat
Summary of the content on the page No. 8
Carefully position the ceramic fiber logs and twigs over the burner as shown in Figures 6 Burner (EDV3530), 7 (EDV4035) or 8 (EDV4540) on this page. Refer to the detailed log placement Venturi instructions provided in the LOG PLACEMENT GUIDE accompanying this document. Tube Proper twig placement is critical to prevent sooting. Twigs should be placed in the gaps between the flame peaks and should be positioned so that at no time they impinge the flames. Air Shutter Opening Air Decrease Shutter I
Summary of the content on the page No. 9
Glowing Embers (Rockwool) Placement ACCESSORY COMPONENTS Refer to the detailed glowing embers place- ment instructions provided in the LOG PLACE- MENT GUIDE accompanying this document. Ceramic Panel Placement Refer to the detailed ceramic panel placement instructions provided in the LOG PLACEMENT GUIDE accompanying this document. Millivolt Appliance Checkout Remote Control System (Deluxe) H0251 RCL-T Remote Control System (Standard) H0249 RCL The pilot flame should be steady, not lifting or flo
Summary of the content on the page No. 10
ACCESSORY COMPONENTS CONTINUED (FBK-200 Models Only) Hood Kits Forced Air Blower Kits Catalog No. -Single Speed 80L84 FBK-100 Model No. -Variable Speed with Model No. Polished Brushed wall-mountable switch 80L85 FBK-200 -Variable Speed with Brass Stainless unit-mountable switch 80L86 FBK-250 96K67 88L49 Clean Face Panel Kits EDV3530 EB35PB EB35BS Forced Air Kit Catalog No. Model No. 96K68 88L50 Model No. EDV4035 EB40PB EB40BS The FBK-100 blower provides constant velocity 88L36 EDV3530 96K6
Summary of the content on the page No. 11
ACCESSORY COMPONENTS CONTINUED 2-Piece Louver Kits Catalog No. Model No. Screen Panel Kits Model No. Polished Brushed Catalog No. Finish Trim Kits Brass Stainless Model No. Model No. 96L05 96L09 Catalog No. EDV3530 88L52 2LVR35PB 2LVR35BS Model No. EDV3530 Model No. HG35E 96L06 96L10 Polished EDV4035 96K32 2LVR40PB 2LVR40BS Brass EDV4035 HG40 96L07 96L11 H0454 EDV4540 EDV3530 96K33 2LVR45PB 2LVR45BS TK35EPB3 EDV4540 HG45 96K22 EDV4035 The 2-piece polished brass or brushed stain- TK40PB3 These sc
Summary of the content on the page No. 12
ACCESSORY COMPONENTS CONTINUED Style View Doors - Style View Doors come in 4 beautiful styles. They are easy to install and will not require hardware to attach them to the standard glass door frame. The door includes heavy duty magnet door latches and functional twin-pane doors. Arch Design Square Design Arch Pane Design Square Pane Design ARCH DESIGN KITS SQUARE DESIGN KITS Cat. No. Model Description Model Series Cat. No. Model Description Model Series H0862 AD40C 40” Arch Doors, Charcoal H0950
Summary of the content on the page No. 13
ACCESSORY COMPONENTS CONTINUED Style View Doors Continued - Style View Doors also come in a Tall Arch Pane Design. Two distinctive grille kits, the “Crescents” and “Sunrise” design, are also offered seperately. They are easy to install and will not require hardware to attach them to the standard glass door frame. The door includes heavy duty magnet door latches and functional twin-pane doors. TALL ARCH PANE DOORS Cat. No. Model Description Model Series H3537 TAPD35EC 35” Elite Arch Pane Doors,
Summary of the content on the page No. 14
TH TH TP TP WIRING DIAGRAMS Electronic Wiring Diagram (Honeywell) Electronic Wiring Diagram (Honeywell) Showing the Blower Wiring for the Optional Wiring diagrams are provided here for refer- Showing the Blower Wiring for the Optional FBK-250 Kits FBK-100 and FBK-200 Kits ence purposes only. This information is also 1. If any of the original wire as supplied must be replaced, 1. If any of the original wire as supplied must be replaced, provided on schematics attached directly to 1. it must be
Summary of the content on the page No. 15
NOTES: NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. 15
Summary of the content on the page No. 16
I O O L I P T O it TPTH TP TH L I P F L F O LIGHTING INSTRUCTIONS – MILLIVOLT GAS VALVE FOR YOUR SAFETY READ BEFORE LIGHTING WARNING: IF YOU DO NOT FOLLOW THESE INSTRUCTIONS EXACTLY, A FIRE OR EXPLOSION MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE. A. This appliance has a pilot which must be lighted with a piezo • Do not use any phone in your building. ignitor. When lighting the pilot, follow these instructions • Immediately call your gas supplier from a neighbor’s phone.
Summary of the content on the page No. 17
I O O L I P T O it TPTH TP TH L I P F L F O INSTRUCTIONS D’ALLUMAGE – VANNE GAZ MILLIVOLT POUR VOTRE SÉCURITÉ, LISEZ CES INSTRUCTIONS AVANT L’ALLUMAGE AVERTISSEMENT : SI VOUS NE SUIVEZ PAS CES INSTRUCTIONS À LA LETTRE, IL POURRAIT S’EN SUIVRE UN INCENDIE OU UNE EXPLOSION CAUSANT DES DOMMAGES MATÉRIELS, DES BLESSURES CORPORELLES OU MÊME DES PERTES DE VIE. A. Cet appareil est muni d’une veilleuse qui doit être allumée avec un • Appelez immédiatement votre compagnie de gaz en utilisant le allumeur
Summary of the content on the page No. 18
IGNITER OFF ON CONTROL LIGHTING INSTRUCTIONS — ELECTRONIC FOR YOUR SAFETY READ BEFORE LIGHTING WARNING: IF YOU DO NOT FOLLOW THESE INSTRUCTIONS EXACTLY, A FIRE OR EXPLOSION MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE. A. When lighting the appliance, follow these instructions • Immediately call your gas supplier from a neighbor’s exactly. phone. • If your gas supplier cannot be reached, call the fire B. BEFORE OPERATING smell all around the appliance area department. for g
Summary of the content on the page No. 19
IGNITER OFF ON CONTROL INSTRUCTIONS D’ALLUMAGE — ELECTRONIC POUR VOTRE SÉCURITÉ, LISEZ CES INSTRUCTIONS AVANT L’ALLUMAGE AVERTISSEMENT: SI VOUS NE SUIVEZ PAS CES INSTRUCTIONS À LA LETTRE, IL POURRAIT S’EN SUIVRE UN INCENDIE OU UNE EXPLOSION CAUSANT DES DOMMAGES MATÉRIELS, DES BLESSURES CORPORELLES OU MÊME DES PERTES DE VIE. A. Lorsque vous allumez l’appareil, suivez exactement ces instruc- • Appelez immédiatement votre compagnie de gaz en utilisant tions. le téléphone du voisin. • S’il vous est
Summary of the content on the page No. 20
TROUBLESHOOTING THE MILLIVOLT GAS CONTROL SYSTEM Note: Before troubleshooting the gas control system, be sure external gas shut off valve (located at gas supply inlet) is in the “ON” position. Important: Valve system troubleshooting should only be accomplished by a qualified service technician. POSSIBLE CAUSES SYMPTOM CORRECTIVE ACTION A. Defective ignitor 1. Spark ignitor will not light Check for spark at electrode and pilot; if no spark and (no spark at electrode). pilot after repeated electro
