Bradley Smoker S19-690H user manual

Summary of the content on the page No. 1

Installation
Instructions
S19-690LHS, S19-690H
10-Gallon Tank with
Eye Wash and Optional
Heater Jacket
S19-690LHS
Table of Contents
Pre-Installation Information . . . . . . . . . . . . . . .2
Installation Instructions . . . . . . . . . . . . . . . . .3–4
Maintenance Instructions . . . . . . . . . . . . . . . . .5
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . .5
Assembly of Components . . . . . . . . . . . . . . . .6
Parts List . . . . . . . . . . . . . . . . . . . . . . . . . .

Summary of the content on the page No. 2

10-Gallon Tank with Eye Wash and Optional Heater Jacket S19-690LHS, S19-690H Installation Instructions Pre-Installation Information Operation The Bradley 10-Gallon Tank provides emergency protection in areas where permanent water supply is not available. After emergency use of the portable unit, further cleansing of the injury should be administered at a conventional plumbed fixture. Components 10-Gallon Tank: The stainless steel tank has built-in carrying handles. The tank has a tire filler val

Summary of the content on the page No. 3

10-Gallon Tank with Eye Wash and Optional Heater Jacket Installation Instructions S19-690LHS, S19-690H Installation Instructions Step 1: Install eye wash 1. Attach the eye wash to the tank outlet with pipe sealant (supplied Back View by installer) (see Figure 1). IMPORTANT: When attaching the eye wash to the tank outlet, hold the adapter (Item 3) with a wrench to prevent stripping. Failure to do so may damage the seal and cause leakage. 2. Attach the pressure gauge to the adapter on the pressure

Summary of the content on the page No. 4

10-Gallon Tank with Eye Wash and Optional Heater Jacket S19-690LHS, S19-690H Installation Instructions Installation Instructions continued . . . Step 2: Fill tank and pressurize 1. If the tank is pressurized, relieve the tank pressure by pulling up on the relief tank tab in the center of the cover until the pressure gauge reads “0.” IMPORTANT: DO NOT open the cover until the pressure gauge reads “0”! 2. Open the tank by pulling up on the wire handle located on top of the Quicklock cover. Push do

Summary of the content on the page No. 5

10-Gallon Tank with Eye Wash and Optional Heater Jacket Installation Instructions S19-690LHS, S19-690H Maintenance Instructions WARNING: Water preservatives protect potable water from bacteria, fungi and algae growth for up to four months. If a water preservative is not used with this eye wash, it is recommended that the tank be cleaned weekly or as often as needed. Infection, loss of vision or other serious injury may result from misuse of this eye wash. DO NOT use expired, cloudy, colored or c

Summary of the content on the page No. 6

10-Gallon Tank with Eye Wash and Optional Heater Jacket S19-690LHS, S19-690H Installation Instructions Assembly of Components Figure 2 Parts List Item Part No. Qty Description Item Part No. Qty Description 1 S27-252 1 TANK – 10 GALLON 9 107-371 2 TETHERED DUST COVER 2 153-429 1 ADAPTER 10 269-1671 1 PIPE WRAP 3 153-217 1 ADAPTER 11 261-007B 1 HEATER BELT, 4 " 4 169-786 1 PRESSURE GAUGE 12 S83-167 1 JUNCTION BOX ASSEMBLY 5 S27-161 1 TANK VALVE ASSY. 13 230-022 1 POWER SUPPLY CORD 6 204-095 1 OPER