Summary of the content on the page No. 1
HUAWEI F360
USER GUIDE
Summary of the content on the page No. 2
Copyright © Huawei Technologies Co., Ltd. 2012. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd. and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublic
Summary of the content on the page No. 3
Getting Started Front View Note ： The following illustration is provided for your reference only. The actual appearance depends on the specific model you purchased. 1 6 2 5 3 4 No. Key Function 1 Navigation In standby mode, press a key to keys access the specific shortcut menu. In standby mode, press OK to access the main menu. During a call, press the left or right navigation key to adjust the call volume. 2
Summary of the content on the page No. 4
No. Key Function 2 Right Press this key to select the menu function key option in the lower right corner of the screen. 3 End key Press this key to end or cancel a call. Press and hold this key to power on or off the phone. In non-standby mode, press this key to return to standby mode. 4 Numeric and Press the keys to input numbers Symbol keys or characters. Keys 2 to 9: In standby mode, press and hold a key for speed dialing. In edit mode, press <#> key t
Summary of the content on the page No. 5
Icons Icon Description Icon Description Signal strength Battery level Silent mode Alarm is set Not blinking: Unread Voice message message Blinking: Message full Installation Installing the SIM Card and Battery Make sure that the phone is powered off and the power adapter is disconnected. Slide the SIM card into the card slot in the right direction and with the golden contact facing downward. Make sure that the SIM card is inserted into the card slot completely. Ple
Summary of the content on the page No. 6
Charging the Battery Using the Power Adapter Method 1 ： Method 2 ： Note ： If you plan to leave the phone unused for a long period, you must remove the battery from the phone. If your battery power is exhausted or the battery is unused for a long period, the phone screen may not be able to light up when you charge the battery. This is a normal case. The phone will be ready for use after being charged for a while. Powering On the Phone Press and hold until the scr
Summary of the content on the page No. 7
Call Functions Making a Call 1. In standby mode, press the numeric keys to input the phone number. 2. Press to call the number. 3. Press to end a call or cancel the dialing. Note ： In standby mode, press to browse through the call history. Select a number and press to make the call. In Contacts, select a number. Press to make the call. During a call, press to activate or deactivate the handsfree function. Receiving or Rejecting a Call When a call comes in, press or
Summary of the content on the page No. 8
4. Select the recipient ： Select the recipient from contacts. Enter the number. 5. Press OK to send the message. Reading a Text Message All received messages are stored in Inbox. 1. Choose Menu > SMS > Inbox. 2. Press the Up or Down navigation key to browse through the messages. 3. Press OK to read a message. 4. Press the Left function key to reply, forward, or delete the message, or call back or retrieve the number. Input Methods Switching Between Input Methods The symbol of t
Summary of the content on the page No. 9
In the ABC, abc or Eng input mode, press 1 repeatedly to select and enter the commonly used punctuations. Eng In Eng input method, input an English word through the following steps: 1. Press all relevant numeric keys according to the word to be input, and the phone will automatically display the Candidate word. 2. Press the Up or Down navigation key to select the word. 3. Press the Left or Right navigation key to confirm the word selection; or press 0 to confirm the word selection a
Summary of the content on the page No. 10
2. Press the navigation key to find the required symbol. 3. Press to enter the symbol. FM Radio(Optional) To listen to the radio, select FM radio. When listening to the radio: Press the up or down navigation key to switch between the channels in the saved channel list. Press the left or right navigation key to decrease or increase the volume. You can select Opt. for the following options: Select Opt. > Radio Off to turn the FM radio off. Select Opt. > Channel list to display
Summary of the content on the page No. 11
PIN Code and PUK Code Personal identification number (PIN) code helps effectively prevent unauthorized use of your SIM card. Personal unblocking key (PUK) code helps change the locked PIN code. If you enter the wrong PIN code for three times, your SIM card will be locked. In this case, you need to enter the PUK code to unblock the locked PIN code. PIN code and PUK code are provided together with the SIM card. For details, consult your service provider. Keypad Lock In standby mode, pre
Summary of the content on the page No. 12
Medical Device Follow rules and regulations set forth by hospitals and health care facilities. Do not use your device when using the device is prohibited. Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a device and a pacemaker to prevent potential interference with the pacemaker. If you are using a pacemaker, use the device on the opposite side of the pacemaker and do not carry the device in your front pocket. Some wireless devices may
Summary of the content on the page No. 13
Traffic Security Observe local laws and regulations while using the device. In addition, if using the device while driving a vehicle, comply with the following guidelines: Concentrate on driving. Your first responsibility is to drive safely. Do not talk on the device while driving. Use hands-free accessories. When you have to make or answer a call, park the vehicle at the road side before using your device. RF signals may affect electronic systems of motor vehicles. For
Summary of the content on the page No. 14
When you are on a call, do not touch the antenna. Touching the antenna affects the call quality and results in increase in power consumption. As a result, the talk time and the standby time are reduced. While using the device, observe the local laws and regulations, and respect others' privacy and legal rights. Keep the ambient temperature between 0°C and 45°C while the device is being charged. Keep the ambient temperature between -10°C to 55°C for using the device powered by a
Summary of the content on the page No. 15
Use the AC power supply defined in the specifications of the charger. An improper power voltage may cause a fire or a malfunction of the charger. Do not connect two poles of the battery with conductors, such as metal materials, keys, or jewelries. Otherwise, the battery may be short-circuited and may cause injuries and burns on your body. Do not disassemble the battery or solder the battery poles. Otherwise, it may lead to electrolyte leakage, overheating, fire, or explosion.
Summary of the content on the page No. 16
Do not place your device, battery, and charger in places where they can get damaged because of collision. Otherwise, it may lead to battery leakage, device malfunction, overheating, fire, or explosion. Do not place magnetic storage media such as magnetic cards and floppy disks near the device. Radiation from the device may erase the information stored on them. Do not leave your device, battery, and charger in a place with an extreme high or low temperature. Otherwise, they may
Summary of the content on the page No. 17
Your device is a low-power radio transmitter and receiver. As recommended by international guidelines, the device is designed not to exceed the limits for exposure to radio waves. These guidelines were developed by the independent scientific organization International Commission on Non-Ionizing Radiation Protection (ICNIRP) and include safety measures designed to ensure safety for all users, regardless of age and health. The Specific Absorption Rate (SAR) is the unit of measurement for
Summary of the content on the page No. 18
end of their life. For more detailed information about the recycling of the device or batteries, please contact your local city office, the household waste disposal service, or the retail store where you purchased it/them. Disposal of the device and batteries if included is subject to WEEE Directive Recast (Directive 2012/19/EU) and Battery Directive (Directive 2006/66/EC). The purpose for separating WEEE and batteries from other waste is to minimize the potential environmental impacts
Summary of the content on the page No. 19
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarante
