Summary of the content on the page No. 1
READ AND SAVE THESE INSTRUCTIONS
™
MONTEREY II
52” Ceiling Fan Owner's Manual
Model Numbers
CF772BS00 - Brushed Steel
CF772ORB00 - Oil Rubbed Bronze
CF772SW00 - Satin White
Net Weight: 25.4 Lbs.
Questions, problems, missing parts: Before returning to the store call
Emerson Electric Customer Service
8 a.m. - 6 p.m., EST, Monday-Friday
1-800-654-3545
Part No. F40BP74670000 Form No. BP7467
11/12 U.L. Model No.: CF772
www.emersonfans.com
Summary of the content on the page No. 2
READ AND SAVE THESE INSTRUCTIONS Safety Instructions 3. The outlet box and joist must be securely mounted ! WARNING and capable of reliably supporting at least 50 pounds. Use only U.L. outlet boxes listed as “Acceptable for TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, Fan Support of 15.9kg. (35 lbs.) or less”, and use the OR INJURY TO PERSONS, OBSERVE THE mounting screws provided with the outlet box. Most FOLLOWING: outlet boxes commonly used for support of light a. Use this unit only in a mann
Summary of the content on the page No. 3
Unpacking Instructions PACKAGE CONTENTS ! WARNING Do not install or use fan if any part is damaged or Part Description Quantity missing. Call Toll-Free: A Fan Motor Assembly 1 1-800-654-3545 B Ceiling Canopy 1 C Coupler Cover 1 ! WARNING D Blade Flanges 5 This product is designed to use only those parts E Fan Blades 5 supplied with this product and/or any accessories F Hanger Bracket 1 designated specifically for use with this product by Emerson Electric Co. Substitution of parts or G Hanger Bal
Summary of the content on the page No. 4
This Manual Is Designed to Make it as Easy as Possible for You to Assemble, Install, Operate and Maintain Your Ceiling Fan Installed Wire Length Wire Size A.W.G. Tools Needed for Assembly Up to 50 ft. 14 One Phillips head screwdriver One stepladder 50-100 ft. 12 One 1/4” blade screwdriver One wire stripper One 5/16” open end wrench, or pliers ! WARNING Three wire connectors (supplied). Before assembly your ceiling fan, refer to section on proper method of wiring your fan (page 9). If you feel Ma
Summary of the content on the page No. 5
4. Make sure the grommet is properly installed in the coupler cover, then slide the coupler cover on the CEILING COVER downrod until it rests on the motor housing. Place the ceiling cover over the downrod. Be sure that the ceiling cover and the coupler cover are both oriented correctly (Figure 3). 5. Reinstall the hanger ball (Figure 4) on the downrod DOWNROD as follows. Route the three 80” motor leads through GROMMET COUPLING the hanger ball. Position the pin through the two COVER holes in th
Summary of the content on the page No. 6
13. Remove one of the screws from the switch adapter. REMOVE SWITCH SWITCH HOUSING Retain for future installation. Loosen the two ADAPTER SCREW COVER PLATE remaining screws in the switch adapter for installation of the switch housing cover plate (Figure 7). 14. Place the switch housing cover plate onto the LOOSEN SWITCH switch adapter. Engage the keyholes of the switch ADAPTER SCREWS (2) housing cover plate by rotating the switch housing SWITCH ADAPTER cover plate clockwise on the switch a
Summary of the content on the page No. 7
Electrical Requirements Your new ceiling fan will require a grounded electrical The outlet box must be securely anchored and capable supply line of 120 volts AC, 60 Hz, 15 amp circuit. of withstanding a load of at least 50 pounds. If your fan is to replace an existing ceiling light fixture, turn electricity off at the main fuse box at this time and ! WARNING remove the existing light fixture. To reduce the risk of fire, electric shock, or personal injury, mount fan to outlet box marked “Acceptab
Summary of the content on the page No. 8
How to Hang Your Ceiling Fan CEILING ! WARNING The fan must be hung with at least 7' of clearance from floor to blades (Figure 10). ! WARNING AT LEAST 7' The outlet box and joist must be securely mounted and capable of supporting at least 50 lbs. Use only a U.L. outlet box listed as “Acceptable for Fan Support of 15.9kg. (35 lbs.) or less”. FLOOR Figure 10 ! WARNING To reduce the risk of fire, electric shock, or personal injury, mount fan to outlet box marked “Acceptable for Fan Support of 15.9k
Summary of the content on the page No. 9
How to Wire Your Ceiling Fan If you feel that you do not have enough electrical BLACK AND BLUE wiring knowledge or experience, have your fan FAN WIRES GROUND installed by a licensed electrician. WIRE 1. Connect the green grounding lead from the hanger LISTED WHITE SUPPLY ball and the green grounding lead from the hanger WIRE (NEUTRAL) CONNECTOR (3) bracket to the grounding conductor of supply (this may be a bare wire or wire with green colored insulation). Securely connect wires with wire connec
Summary of the content on the page No. 10
Using Your Ceiling Fan 1. Restore electrical power to the outlet box by turning Three-Speed the electricity on at the main fuse box. 1st Pull—HIGH 2. Check the operation of the fan by gently pulling on 2nd Pull—Medium the pull chain switch. 3rd Pull—Low 3. All fans are shipped from the factory with the 4th Pull—OFF reversing switch positioned to the “left” circulate air downward. If airflow is desired in opposite SPEED direction, turn your fan OFF and wait for the blades CONTROL REVERSING SWITC
Summary of the content on the page No. 11
Trouble Shooting ! WARNING: FOR YOUR OWN SAFETY TURN OFF POWER AT FUSE BOX OR CIRCUIT BREAKER BEFORE TROUBLE SHOOTING YOUR FAN. TROUBLE PROBABLE CAUSE SUGGESTED REMEDY 1. Fan will not start. 1. Fuse or circuit breaker blown. 1. Check main and branch circuit fuses or circuit breakers. 2. Loose power line connections to the fan, or loose 2. Check line wire connections to fan and switch wire switch wire connections in the switch housing. connections in the switch housing. wire connections in the s
Summary of the content on the page No. 12
Repair Parts 2 1 3 5 15 4 6 7 16 9 8 12 18 17 19 20 10 21 11 13 12 U.L. Model No.: CF772
Summary of the content on the page No. 13
Repair Parts Listing Model Numbers Key No. Description CF772BS00 CF772ORB00 CF772SW00 * Hanger Ball Assembly, 760750-17 760750-32 760750-92 Consisting of: 1 Hanger Bracket — — — 2 Hanger Ball — — — 3 Downrod, 4.5” — — — * Parts Bag Containing: 764388-CHRM 764388-BLOX 764388-CHRM 4 Wire Connector (3) — — — 5 Threaded Stud (2) — — — 6 Lockwasher (2) — — — 7 Knurled Knob (2) — — — 8 Pin, Clevis — — — 9 Clip, Hairpin — — — 10 Wood Ball/Chain — — — 11 Screw, 1/4-20 x .5” (1) — — — 12 Screw, #10-32 x
Summary of the content on the page No. 14
Notes 14 U.L. Model No.: CF772
Summary of the content on the page No. 15
Emerson Air Comfort Ceiling Fan Limited Warranty What The Limited Warranty Covers: This limited warranty is offered by Air Comfort Products division of Emerson Electric Co. ("Emerson" "we" or "us") located at the address stated below to the original retail purchaser ("you" or "your") of an Emerson Air Comfort Ceiling Fan product ("Emerson Ceiling Fan") and covers the motor and the other components and accessories of the Emerson Ceiling Fan against all defects in workmanship and materials. What T
Summary of the content on the page No. 16
Air Comfort Products DIVISION OF EMERSON ELECTRIC CO. 8100 W. Florissant • St. Louis, MO 63136 Questions, problems, missing parts: Before returning to the store call Emerson Electric Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday 1-800-654-3545 www.emersonfans.com Retain this manual for future use. Part No. F40BP74670000 Form No. BP7467 11/12 U.L. Model No.: CF772
