Summary of the content on the page No. 1
KRAMER ELECTRONICS LTD.
USER MANUAL
MODEL:
PT-5T/R
IR Extender/Repeater
P/N: 2900-300010 Rev 3
Summary of the content on the page No. 2
Summary of the content on the page No. 3
Contents 1 Introduction 1 2 Getting Started 2 2.1 Achieving the Best Performance 2 2.2 Safety Instructions 3 2.3 Recycling Kramer Products 3 3 Overview 4 3.1 Defining the PT-5T/R IR Extender/Repeater 4 4 Connecting and Using the PT-5T/R IR Extender/Repeater 6 4.1 Identifying the IR Receiver and IR Emitters 6 4.2 Connecting the PT-5T/R IR Extender/Repeater 6 4.3 Using the PT-5T/R IR Extender/Repeater 7 5 Technical Specifications 8 Figures Figure 1: PT-5T IR Extender/Repeater 4 Fi
Summary of the content on the page No. 4
1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront video, audio, presentation, and broadcasting professionals on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better! Our 1,000-plus different models now appear in 11 groups that are clearly defined by function: GROUP 1: Distribution Amplifi
Summary of the content on the page No. 5
2 Getting Started We recommend that you: Unpack the equipment carefully and save the original box and packaging materials for possible future shipment Review the contents of this user manual Go to http://www.kramerelectronics.com/support/product_downloads.asp to check for up-to-date user manuals, application programs, and to check if i firmware upgrades are available (where appropriate). 2.1 Achieving the Best Performance To achieve the best performance: Use only good quality
Summary of the content on the page No. 6
2.2 Safety Instructions Caution: There are no operator serviceable parts inside the unit ! Warning: Use only the Kramer Electronics input power wall adapter that is provided with the unit Warning: Disconnect the power and unplug the unit from the wall before installing 2.3 Recycling Kramer Products The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims to reduce the amount of WEEE sent for disposal to landfill or incineration by requiring it to be collected
Summary of the content on the page No. 7
3 Overview The PT-5T/R is an IR transmitter and receiver pair that lets you control up to five devices via their own remote control transmitters from an extended distance over TP (twisted pair) cable. In particular, the PT-5T/R: Lets you operate IR devices that are stacked away in closets, cabinets and even other rooms Can operate at a distance of up to 250m meters (820ft) between the transmitter and receiver Is 5V DC fed 3.1 Defining the PT-5T/R IR Extender/Repeater This sec
Summary of the content on the page No. 8
Figure 2 defines the front and rear panels of the PT-5R. Figure 2: PT-5R IR Extender/Repeater # Feature Function 1 OUT 1 3.5mm Mini Jack Plug in the third IR emitter (see Section 4.1) 2 OUT 2 3.5mm Mini Jack Plug in the fourth IR emitter 3 OUT 3 3.5mm Mini Jack Plug in the fifth IR emitter 4 IN (CAT 5) RJ-45 TP Connect to the PT-5T using CAT 5 TP cable Connector 5 Power LED Lights red when the unit receives power 6 5V DC Connect to the power adapter (only one power adapt
Summary of the content on the page No. 9
4 Connecting and Using the PT-5T/R IR Extender/Repeater 4.1 Identifying the IR Receiver and IR Emitters The receiver and emitters can be identified by their size and shape. The receiver is large and trapezoidal in shape; the emitters are small and rectangular in shape with a rounded top. Both have a 2m (6.6ft) cable attached terminated with a 3.5mm mini jack. Figure 3: IR Receiver and Emitter 4.2 Connecting the PT-5T/R IR Extender/Repeater To connect the PT-5T/R IR Extender/Repeat
Summary of the content on the page No. 10
6. Connect the PT-5T and the PT-5R together, using TP cable, via the RJ-45 connectors on the rear panel of both devices. 7. Connect the power adapter to the 5V DC connector on the rear panel of the PT-5T or the PT-5R and to the mains electricity. Note: Only one of the devices needs to be connected to a power adapter. Figure 4: Connecting the PT-5T/R 4.3 Using the PT-5T/R IR Extender/Repeater Use the remote control specific to the device to operate any of the devices connected vi
Summary of the content on the page No. 11
5 Technical Specifications INPUTS: PT-5T: 1 IR receiver on a PT-5R: 1 RJ-45 3.5mm mini jack OUTPUTS: PT-5T: 2 IR emitters on PT-5R: 3 IR emitters on 3.5mm mini jacks, 1 RJ-45 3.5mm mini jacks MAXIMUM OPERATING 250m (820ft) DISTANCE: CARRIER FREQUENCY: 36-40kHz POWER CONSUMPTION: 5V DC; PT-5T: 7mA, PT-5R: 6mA OPERATING TEMPERATURE: 0° to +40°C (32° to 104°F) STORAGE TEMPERATURE: -40° to +70°C (-40° to 158°F) HUMIDITY: 10% to 90%, RHL non-condensing DIMENSIONS: 5.0cm x 6.6cm x
Summary of the content on the page No. 12
Summary of the content on the page No. 13
For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We welcome your questions, comments, and feedback. Web site: www.kramerelectronics.com E-mail: info@kramerel.com SAFETY WARNING Disconnect the unit from the power ! supply before opening and servicing P/N: 2900-300010 Rev: 3
