Hunter Fan 42737-01 user manual

Summary of the content on the page No. 1

42737-01 • 11/14/06

Summary of the content on the page No. 2

Welcome Installer’s Choice and Optional Accessories Your new Hunter ceiling fan is an addition to your home or offi ce that ® Understanding Mounting and Installer’s Choice® will provide comfort and performance for many years. Th is installation Hunter’s patented 3-position mounting system provides you maximum For Your Records and Warranty and operation manual gives you complete instructions for installing Assistance installation fl exibility and ease. You can install your Hunter fan in one a

Summary of the content on the page No. 3

1 • Getting Ready 2 • Installing the Ceiling Plate To install a ceiling fan, be sure you can do the following: 2-1. Drill two pilot holes into the wood support structure through the Isolator outermost holes in the outlet box. Th e pilot holes should be 9/64” • Locate the ceiling joist or other suitable support in ceiling. Ceiling in diameter. • Drill holes for and install wood screws. Plate • Identify and connect electrical wires. 2-2. Your fan comes with four neoprene noise isolators (“Isol

Summary of the content on the page No. 4

3 • Assembling and Hanging the Fan 4 • Wiring the Fan Steps 3-1 – 3-2 You can assemble your fan for standard mounting (steps 3-1 – 3-2) All wiring must be in accordance with national and local electrical or for low profi le mounting (steps 3-3 – 3-4). Note: For low profi le codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a mounting, the downrod is replaced with the low profi le washer. qualifi ed electrician. Downrod 3-1. To assemble fan to hang down from a fl at or angled ceiling

Summary of the content on the page No. 5

5 • Installing the Canopy and Canopy Trim Ring 6 • Assembling the Blades Step 5-2 Ceiling Plate 5-1. Holding the canopy, raise the fan off the hook. Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 5-2. Align the slots in the canopy with the tabs on the ceiling plate. 6-1. Your fan may include blade grommets. If your fan has grommets, Step 6-1 (Detail) 5-3. Raise the canopy over the ceiling plate. Rotate the canopy insert them by hand into the hol

Summary of the content on the page No. 6

7 • Completing Your Installation With or Without a Light Fixture Your Hunter fan comes with an integrated light fi xture assembly and an 7-6. To attach the lower switch housing, connect the upper plug optional switch housing cap and plug button. Th is feature gives you the connector from the motor to the lower plug connector in the option of installing the fan with OR without the included light fi xture. lower switch housing assembly. Th e steps below direct you whether or not you are installin

Summary of the content on the page No. 7

8 • Operating and Cleaning Your Ceiling Fan 9 • Troubleshooting Problem: Nothing happens; fan does not move. 8-1. Turn on electrical power to the fan. 1. Turn power on, replace fuse, or reset breaker. 8-2. Th e fan pull chain controls power to the fan. Th e pull chain has 2. Loosen canopy, check all connections according to the wiring the four settings in sequence: High, Medium, Low and Off . fan section. • Pull the chain slowly to change settings. 3. Check the plug connection in the switch ho