Summary of the content on the page No. 1
READ AND SAVE THESE INSTRUCTIONS
Model No.
CF705AB04
CF705HTW04
CF705AGW04
CF705SCB04
CF705AW04
CF705ORB04
CF705BC04
CF705PB04
CF705BS04
CF705WB04
CF705BZH04
CF705WW04
CF705CK04
®
52” NORTHWIND
ENERGY STAR
Ceiling Fan
Net Weight: 16.5 Lbs.
Owner's Manual
LIMITED WARRANTY
What The Warranty Covers:
This warranty covers the motor and the other components and accessories of your Emerson ceiling fan against all defects in workmanship and materials.
You must be the original purchaser or user of the p
Summary of the content on the page No. 2
WARNING ! WARNING: To avoid fire, shock, and serious personal injury, follow these instructions. Safety Instructions 1. Read your owner’s manual carefully and keep it for future reference. 2. Before servicing or cleaning unit, switch power off at service panel and lock service panel disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a warning device, such as a tag, to the service panel. 3. Be careful of
Summary of the content on the page No. 3
This Manual Is Designed to Make it as Easy as Possible for You to Assemble, Install, Operate and Maintain Your Ceiling Fan Tools Needed for Assembly One Phillips head screwdriver One stepladder Installed Wire Length Wire Size A.W.G. One 5/16” blade screwdriver One wire stripper Up to 50 ft. 14 Three wire connectors (supplied). 50-100 ft. 12 MATERIALS ! WARNING Wiring outlet box and box connectors must be of type Before assembly your ceiling fan, refer to section on required by the local code. Th
Summary of the content on the page No. 4
How to Put Your Ceiling Fan Together 1. Pass the 42” motor leads through the opening in ! WARNING the ceiling cover. Be sure the cover is oriented correctly (Figure 1). To reduce the risk of personal injury, do not bend the 2. Separate, untwist and unkink the three motor blade flange when installing the blade flanges, leads. Route the motor leads through the hanger balancing the blades or cleaning the fan. Do not insert foreign objects in between rotating fan blades. ball/downrod assembly. 3. Lo
Summary of the content on the page No. 5
SWITCH Electrical Requirements HOUSING ASSEMBLY Your new ceiling fan will require a grounded electrical supply line of 120 volts AC, 60 Hz, 15 amp circuit. The outlet box must be securely anchored and capa- ble of withstanding a load of at least 50 pounds. ! WARNING To reduce the risk of fire, electric shock, or personal injury, mount fan to outlet box marked “Acceptable for Fan Support”, and use screws supplied with outlet box. Most outlet boxes commonly used for support of light fixtures SWITC
Summary of the content on the page No. 6
How to Hang Your Ceiling Fan OUTLET BOX ! WARNING The fan must be hung with at least 7' of clearance from floor to blades (Figure 6). TWO SCREWS CEILING SUPPLIED WITH HANGER OUTLET BOX BRACKET TAB Figure 7 Figure 2 AT LEAST 2. Carefully lift the fan and seat the hanger ball/ 7' downrod assembly on the hanger bracket that was just attached to the outlet box (Figure 8). Be sure the groove in the ball is lined up with tab on the Figure 6 FLOOR hanger bracket (Figure 7). ! WARNING ! WARNING The outl
Summary of the content on the page No. 7
How to Wire Your Ceiling Fan If you feel that you do not have enough electrical ! WARNING wiring knowledge or experience, have your fan installed by a licensed electrician. Check to see that all connections are tight, including ground, and that no bare wire is visible at the wire ! WARNING connectors, except for the ground wire. Do not operate fan until blades are in place. Noise and fan To avoid possible electrical shock, be sure electricity damage could result. is turned off at the main fuse b
Summary of the content on the page No. 8
Using Your Ceiling Fan Energy Efficient Use of Ceiling Fans 1. Restore electrical power to the outlet box by turning the electricity on at the main fuse box. Ceiling fan performance and energy savings rely 2. Check the operation of the fan by gently pulling on heavily on the proper installation and use of the ceil- the pull chain switch. ing fan. Here are a few tips to ensure quality and product performance. All fans are shipped from the factory with the revers- ing switch positioned “down” to c
Summary of the content on the page No. 9
Maintenance Accessories 1. Ceiling Fan Light Kits (see store or catalog). IMPORTANT CARE INSTRUCTIONS for your Ceiling Fan 2. Ceiling Fan/Light Controls (see store or catalog). 3. Downrod Extension Kits (see store or catalog). Periodic cleaning of your new ceiling fan is the only maintenance that is needed. ! WARNING When cleaning, use only a soft brush or lint free cloth to avoid scratching the finish. The use of any other control not specifically approved for this fan could result in fire, sho
Summary of the content on the page No. 10
Repair Parts 2 1 3 10 5 9 6 4 7 8 17 18 16 11 13 12 15 14 Before discarding packaging material, be certain all parts have been removed. HOW TO ORDER REPAIR PARTS WHEN ORDERING REPAIR PARTS, ALWAYS GIVE THE FOLLOWING INFORMATION: • PART NUMBER • NAME OF ITEM • PART DESCRIPTION • MODEL NUMBER The model number of your Fan will be found on a label attached to the top housing. For repair parts, phone 1-800-654-3545. 10 U.L. Model No.: CF705
Summary of the content on the page No. 11
Repair Parts Listing Key Model No. No. Description CF705WW04 CF705PB04 CF705AB04 CF705BS04 CF705SCB04 CF705HTW04 * Hanger Ball Assembly, 760750-3 760750-1 760750 760750-24 760750-36 760750-34 Consisting of: 1 Hanger Bracket — — — — — — 2 Hanger Ball — — — — — — 3 Downrod — — — — — — * Parts Bag Containing: 762897-3 762897-2 762897 762897-1 762897 762897-3 4 Wire Connector (3) — — — — — — 5 Threaded Stud (2) — — — — — — 7 Lockwasher (2) — — — — — — 8 Knurled Knob (2) — — — — — — 9 Pin, Clevis — —
Summary of the content on the page No. 12
Air Comfort Products
!! Part No. F40BP72240007 Printed in China 09/07 Form No. BP7224-7 U.L. Model No.: CF705
