Summary of the content on the page No. 1
BP7305 Westfield 6/30/06 12:10 AM Page 1
READ AND SAVE THESE INSTRUCTIONS
™
WESTFIELD
Wet Location
52” Ceiling Fan
Net Weight: 24.7 Lbs.
Owner's Manual
Model No.
CF680BQ00 CF680ORB00 CF680WB00
LIMITED WARRANTY
What The Warranty Covers:
This warranty covers the motor and the other components and accessories of your Emerson ceiling fan against all defects in workmanship and
materials. You must be the original purchaser or user of the product to be covered.
What The Period Of Coverage Is:
As i
Summary of the content on the page No. 2
BP7305 Westfield 6/30/06 12:10 AM Page 2 ! WARNING WARNING: To avoid fire, shock, and serious personal injury, follow these instructions. Safety Instructions 1. Read your owner’s manual carefully and keep it for future reference. 2. Before servicing or cleaning unit, switch power off at service panel and lock service panel disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a warning device, such as a
Summary of the content on the page No. 3
BP7305 Westfield 6/30/06 12:10 AM Page 3 THIS FAN IS SUITABLE FOR DAMP LOCATIONS SUCH AS COVERED PORCHES, COVERED PATIOS, AND COVERED DECKS... ANYWHERE THERE IS A ROOF OVERHEAD. This Manual is Designed to Make it as Easy as Possible for You to Assemble, Install, Operate and Maintain Your Ceiling Fan Installed Wire Length Wire Size A.W.G. Tools Needed for Assembly Up to 50 ft. 14 One Phillips head screwdriver One wire stripper 50-100 ft. 12 One stepladder Five wire connector (supplied) Four 7-
Summary of the content on the page No. 4
BP7305 Westfield 6/30/06 12:10 AM Page 4 l. One loose parts bag containing: Electrical Requirements 1. Two 8-32 x 1-1/4” threaded studs Your new ceiling fan will require a 2. Two knurled knobs grounded electrical supply line of 120 volts 3. Two lockwashers AC, 60 Hz, 15 amp circuit. 4. Five wire connectors 5. One clevis pin/hairpin clip The outlet box must be securely anchored assembly and capable of withstanding a load of at 6. Eleven 1/4-20 x 1/2” oval least 50 pounds. head screws 7. Sixtee
Summary of the content on the page No. 5
BP7305 Westfield 6/30/06 12:10 AM Page 5 2. Remove and discard the four shipping How to Assemble Your retainers securing the motor hub in the Ceiling Fan motor housing. NOTE: Take care not to scratch the fan ! WARNING housing when installing the blade Turning off wall switch is not sufficient. assemblies. To avoid possible electrical shock, be 3. Insert an 1/4-20 x 1/2” oval head screw sure electricity is turned off at the main (supplied) into each of the two fuse or circuit breaker box befor
Summary of the content on the page No. 6
BP7305 Westfield 6/30/06 12:10 AM Page 6 6. Remove and retain one of the three LARGE (9-PIN) CONNECTORS SWITCH CUP pan head screw/lockwashers from the ASSEMBLY motor flange (Figure 2); loosen the other two pan head screws three or SMALL (2-PIN) CONNECTORS four turns. 7. Position the switch cup adapter on the motor flange so that the two screws mate with the two keyhole slots in the switch cup adapter (Figure 2). NOTE: Make sure that the lockwashers are positioned between the screw head and t
Summary of the content on the page No. 7
BP7305 Westfield 6/30/06 12:10 AM Page 7 11. Slip the longest pull chain through the The hairpin clip must be properly hole in the large pendant (supplied) installed to prevent the clevis pin from (Figure 5). Then secure the pendant working loose. Pull up on the downrod by snapping the coupling (supplied) to make sure the clevis pin is properly onto the end of the chain. Secure the installed. small pendant (supplied) to the short chain in the same manner as above. ! WARNING 12.Carefully place
Summary of the content on the page No. 8
BP7305 Westfield 6/30/06 12:10 AM Page 8 UPPER ! WARNING HOUSING It is critical that the pin in the hanger ball is properly installed and the setscrew securely tightened. Failure to verify that the pin and setscrew are properly installed could result in the fan falling. 20. Place the ceiling cover over the downrod. Then reinstall the hanger ball (Figure 10) on the downrod as follows. Route the three 80” motor leads through the hanger ball and slide the hanger ball over the downrod. Position
Summary of the content on the page No. 9
BP7305 Westfield 6/30/06 12:10 AM Page 9 How to Hang ! WARNING Your Ceiling Fan Hanger bracket must seat firmly against outlet box. If the outlet box is recessed, ! remove wall board until bracket contacts WARNING box. If bracket and/or outlet box are not The fan must be hung with at least 7' of securely attached, the fan could wobble clearance from floor to blades (Figure 11). or fall. CEILING OUTLET BOX TWO SCREWS SUPPLIED WITH HANGER OUTLET BOX BRACKET AT TAB LEAST Figure 12 7' 2. Carefu
Summary of the content on the page No. 10
BP7305 Westfield 6/30/06 12:10 AM Page 10 How to Wire 2. If you are going to control your fan Your Ceiling Fan using two wall switches or optional Emerson fan/light controls, you will If you feel that you do not have enough need a three-wire (with ground) electrical wiring knowledge or conductor cable between the ceiling experience, have your fan installed by a and wall outlet boxes. This will allow licensed electrician. you to operate the fan housing lights and an optional Emerson Light Fixt
Summary of the content on the page No. 11
BP7305 Westfield 6/30/06 12:10 AM Page 11 FAN SWITCH GENERAL PURPOSE ON-OFF WALL LISTED OUTLET BOX SWITCHES OR BLACK FAN WIRE OPTIONAL EMERSON LIGHT GREEN WIRE BLACK RED FAN/LIGHT CONTROLS BLACK SWITCH (GROUND) (HOT) FROM HANGER TO 120 BRACKET VOLT WHITE SUPPLY WHT. GROUND WIRE GROUND GROUND BLUE THREE-CONDUCTOR CABLE GREEN WIRE (GROUND) (WITH GROUND) BETWEEN FROM HANGER BALL CEILING AND WALL OUTLET BOXES LISTED WIRE CONNECTOR (4) Figure 14 3. If you are going to use a single wall
Summary of the content on the page No. 12
BP7305 Westfield 6/30/06 12:10 AM Page 12 GENERAL PURPOSE ON/OFF LISTED OUTLET BOX BLACK FAN WIRE WALL SWITCH OR OPTIONAL GREEN WIRE BLACK EMERSON FAN CONTROL BLACK (GROUND) (HOT) FROM HANGER TO 120 BRACKET VOLT WHITE SUPPLY WHT. GROUND WIRE GROUND GROUND BLUE TWO-CONDUCTOR CABLE (WITH GROUND) BETWEEN GREEN WIRE (GROUND) CEILING AND WALL OUTLET FROM HANGER BALL BOXES LISTED WIRE CONNECTOR (3) Figure 15 4. Screw the two 1-1/4” threaded studs ! WARNING (supplied) into the tapped holes i
Summary of the content on the page No. 13
BP7305 Westfield 6/30/06 12:10 AM Page 13 Using Your Ceiling Fan Replacing Light Bulbs 1. Restore electrical power to the outlet To replace a burned out light bulb, raise box by turning the electricity on at the the upper housing cover on the downrod main fuse or circuit breaker box. up to the ceiling cover (Figure 18). Loosen the setscrews in the upper housing collar, 2. Check the operation of the fan by then raise the cover and remove the gently pulling on the 4-position speed defective bul
Summary of the content on the page No. 14
BP7305 Westfield 6/30/06 12:10 AM Page 14 Maintenance Accessories IMPORTANT CARE INSTRUCTIONS 1. Ceiling Fan Light Kits (see store or for your Ceiling Fan catalog). 2. Downrod Extension Kits (see store or Periodic cleaning of your new ceiling fan is catalog). the only maintenance that is needed. 3. Ceiling Fan/Light Controls (see store or When cleaning, use only a soft brush or catalog). lint free cloth to avoid scratching the finish. ! Abrasive cleaning agents are not required WARNING and sh
Summary of the content on the page No. 15
BP7305 Westfield 6/30/06 12:10 AM Page 15 ! WARNING: FOR YOUR OWN SAFETY TURN OFF POWER AT FUSE BOX OR CIRCUIT BREAKER BEFORE TROUBLE SHOOTING YOUR FAN. Trouble Shooting TROUBLE PROBABLE CAUSE SUGGESTED REMEDY 1. Fan will not 1. Fuse or circuit breaker 1. Check main and branch start. blown. circuit fuses or circuit breakers. 2. Loose power line 2. Check power line connections connections to the fan, or to fan, and switch wire loose switch wire connections in the switch cup. connections in t
Summary of the content on the page No. 16
BP7305 Westfield 6/30/06 12:10 AM Page 16 Repair Parts 1 2 3 5 4 16 17 7 6 18 19 8 26 9 10 11 22 21 20 12 25 23 13 14 15 24 15 Before discarding packaging material, be certain all parts have been removed. HOW TO ORDER REPAIR PARTS WHEN ORDERING REPAIR PARTS, ALWAYS GIVE THE FOLLOWING INFORMATION: • PART NUMBER • NAME OF ITEM • PART DESCRIPTION • MODEL NUMBER The model number of your Fan will be found on a label attached to the top housing. For repair parts, phone 1-800-654-3545. 16
Summary of the content on the page No. 17
BP7305 Westfield 6/30/06 12:10 AM Page 17 Repair Parts Listing Part Numbers Key Model No. Model No. Model No. No. Description CF680BQ00 CF680ORB00 CF680WB00 * Hanger Pack, Consisting of: 761655-49 761655-50 761655-48 1 Hanger Bracket — — — 2 Hanger Ball — — — 3 Downrod — — — * Parts Bag, Containing: 762952 762952 762952 4 Wire Connector (5) — — — 5 Threaded Stud 8-32 x 1/14” (2) — — — 6 Knurled Knob (2) — — — 7 Lockwasher (2) — — — 8 Hairpin Clip — — — 9 Clevis Pin — — — 10 Screw, Pan Head 10
Summary of the content on the page No. 18
BP7305 Westfield 6/30/06 12:10 AM Page 18 Notes 18
Summary of the content on the page No. 19
BP7305 Westfield 6/30/06 12:10 AM Page 19 Notes 19
Summary of the content on the page No. 20
BP7305 Westfield 6/30/06 12:10 AM Page 20 Air Comfort Products DIVISION OF EMERSON ELECTRIC CO. 8100 W. Florissant ¥ St. Louis, MO 63136 Part No. F40BP73050001 Printed in China 07/06 Form No. BP7305-1
