Summary of the content on the page No. 1
READ AND SAVE THESE INSTRUCTIONS
WET LOCATION
52” Ceiling Fan
Owner's Manual
Model No.
CF654AW00
CF654OB00
CF654ORB00
CF654WB00
CF654WW00
Net Weight: 18.7 Lbs.
ENERGY STAR
Part No. F40BP73360000 Form No. BP7336
U.L. Model No.: CF653
Summary of the content on the page No. 2
! WARNING WARNING: To avoid fire, shock, and serious personal injury, follow these instructions. Safety Instructions 1. Read your owner’s manual carefully and keep it for future reference. 2. Before servicing or cleaning unit, switch power off at service panel and lock service panel disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a warning device, such as a tag, to the service panel. 3. Be careful of
Summary of the content on the page No. 3
THIS FAN IS SUITABLE FOR WET LOCATIONS SUCH AS PORCHES, PATIOS, AND DECKS. This Manual is Designed to Make it as Easy as Possible for You to Assemble, Install, Operate and Maintain Your Ceiling Fan Installed Wire Length Wire Size A.W.G. Tools Needed for Assembly Up to 50 ft. 14 One Phillips head screwdriver 50 - 100 ft. 12 One stepladder One wire stripper ! WARNING Three wire connectors (supplied). Before assembly your ceiling fan, refer to section on MATERIALS proper method of wiring your fan
Summary of the content on the page No. 4
How to Put Your Ceiling Fan Together 1. Remove the hanger ball by loosening the setscrew 3. Tighten the two upper setscrews (Figure 2) in the hanger ball until the ball falls freely down the securely while pulling up on the downrod. downrod (Figure 1). Remove the pin from the NOTE: The setscrews must be properly installed downrod, then remove the hanger ball. Retain the as described above, or fan wobble could result. pin and hanger ball for reinstallation in step 5. 4. Place the ceiling cover o
Summary of the content on the page No. 5
6. Turn fan assembly upside down in preparation for Electrical Requirements mounting fan blade assemblies. Your new ceiling fan will require a grounded electrical IMPORTANT: THE SIDE OF THE FAN BLADE supply line of 120 volts AC, 60 Hz, 15 amp circuit. HAVING THE RIB LINE MUST BE FACING UPWARDS AS SHOWN IN FIGURE 5. The outlet box must be securely anchored and capa- ble of withstanding a load of at least 50 pounds. 7. Mount blade flanges to fan blades using three M5 x 6 washer head screws per bla
Summary of the content on the page No. 6
How to Hang Your Ceiling Fan ! WARNING ! WARNING Hanger bracket must seat firmly against outlet box. If The fan must be hung with at least 7' of clearance the outlet box is recessed, remove wall board until from floor to blades (Figure 7). bracket contacts box. If bracket and/or outlet box are CEILING not securely attached, the fan could wobble or fall. 2.Carefully lift the fan from the foam pad and seat the hanger ball/downrod assembly on the hanger bracket that was just attached to the outlet
Summary of the content on the page No. 7
How to Wire Your Ceiling Fan If you feel that you do not have enough electrical ! WARNING wiring knowledge or experience, have your fan installed by a licensed electrician. Check to see that all connections are tight, including ground, and that no bare wire is visible at the wire connectors, except for the ground wire. Do not ! WARNING operate fan until blades are in place. Noise and fan damage could result. To avoid possible electrical shock, be sure electricity is turned off at the main fuse b
Summary of the content on the page No. 8
Using Your Ceiling Fan Energy Efficient Use of Ceiling Fans ! WARNING Ceiling fan performance and energy savings rely heavily To reduce the risk of fire or electrical shock, do not on the proper installation and use of the ceiling fan. use this fan with any solid-state speed control Here are a few tips to ensure quality and product device. performance. 1. Restore electrical power to the outlet box by turning Choosing the Appropriate Mounting Location. the electricity on at the main fuse box. Cei
Summary of the content on the page No. 9
Maintenance Accessories 1. Ceiling Fan Light Kits (see store or catalog). IMPORTANT CARE INSTRUCTIONS 2. Ceiling Fan/Light Controls (see store or catalog). for your Ceiling Fan 3. Downrod Extension Kits (see store or catalog). Periodic cleaning of your new ceiling fan is the only maintenance that is needed. ! WARNING When cleaning, use only a soft brush or lint free cloth to avoid scratching the finish. To reduce the risk of fire or electrical shock, do not Abrasive cleaning agents are not requ
Summary of the content on the page No. 10
Repair Parts 1 1 9 2 9 9 9 9 9 9 3 9 8 4 7 6 5 9 9 Before discarding packaging material, be certain all parts have been removed. HOW TO ORDER REPAIR PARTS WHEN ORDERING REPAIR PARTS, ALWAYS GIVE THE FOLLOWING INFORMATION: • PART NUMBER • PART DESCRIPTION • NAME OF ITEM • MODEL NUMBER The model number of your Fan will be found on a label attached to the top housing. For repair parts, phone 1-800-654-3545. 10
Summary of the content on the page No. 11
Repair Parts Listing Service Part No. Key No. Description CF654WW01 CF654OB00 CF654WB00 CF654AW00 CF654ORB00 1 Hanger Assembly 761655 761655-9 761655-20 761655-21 761655-32 2 Ceiling Cover 760169 760169-24 760169-30 760169-32 760169-41 3 Blade Set (5) 762004 762004-1 762004-5 762004-4 762004-6 4 Flange Set (5) 763116-WW 763116-OB 763116-WB 763116-AW 763116-ORB 5 Switch Housing Cover 763117-WW 763117-OB 763117-WB 763117-AW 763117-ORB 6 Capacitor 763123 763123 763123 763123 763123 7 Speed Control
Summary of the content on the page No. 12
LIMITED WARRANTY What The Warranty Covers: This warranty covers the motor and the other components and accessories of your Emerson ceiling fan against all defects in workmanship and materials. You must be the original purchaser or user of the product to be covered. What The Period Of Coverage Is: As it applies to the motor, this warranty will last for thirty years from the date you purchased your ceiling fan. All other com- ponents and accessories are covered by this warranty for one year from t
