Summary of the content on the page No. 1
Ceramic
Tower Heater Instruction Booklet
KCE440
KCE440_IB_FA.indd 1 12/10/09 2:26 PM
Summary of the content on the page No. 2
Important Please retain your instruction book for future use. In the event that you need some assistance with your Kambrook appliance, please contact our Customer Service Department on 1300 139 798 (Australia) or 09 271 3980 (New Zealand). Alternatively, visit us on our website at www.kambrook.com.au KCE440_IB_FA.indd 2 12/10/09 2:26 PM
Summary of the content on the page No. 3
Contents Kambrook Recommends p4 Safety First Your Ceramic Tower Heater p6 Quick Start Guide p7 Using Your Ceramic Tower Heater p8 Care and Cleaning p11 Warranty Details p12 KCE440_IB_FA.indd 3 12/10/09 2:26 PM
Summary of the content on the page No. 4
Kambrook Recommends Safety First IMPORTANT: Please retain your instruction book for future use. At Kambrook, we believe that safe performance is the first priority in any consumer product, so that you, our valued customer can confidently use and trust our products. We ask that any electrical appliance that you use be operated in a sensible fashion with due care and attention placed on the following important operating instructions. Important Safeguards For Your Kambrook Ceramic Tower Heat
Summary of the content on the page No. 5
• Do not allow materials that have been • Switch off at the control switch and in contact with oil, petroleum based power outlet, then unplug and allow products or drying fluids to come in heater to cool down before cleaning or contact with the heater. storing. • Do not run the cord under carpeting • Use this heater only as described in this or cover the cord with rugs, runners or instruction manual. Any other use not the like. Arrange cord away from traffic recommended by the manufactu
Summary of the content on the page No. 6
Your Ceramic Tower Heater 1. 1800 watt ceramic heating 7. 2 heat setting, plus auto mode element for efficient heating and fan only setting 2. LCD screen 8. 90° degree oscillation for warmth throughout the room 3. ThermoGuard protection for peace of mind 9. On/Off button and variable temperature dial, to turn 4. Full featured remote control the heater on and off and 5. Power switch to maintain your desired temperature setting Control Panel 10. Power-On indicator 6. Convenient 8hr auto-
Summary of the content on the page No. 7
T E M P E Quick Start Guide Setting the Turning the heating heater on mode Plug the cord Switch on the Press the On/ The heater will Press the MODE into a 230V or unit using the Off button to start operating button to 240V power ON/OFF switch. activate. at the HIGH select the LOW point and heat setting. heat setting, switch on. Leave at HIGH and retain a until the room comfortable temperature is temperature for comfortable. your room. Setting the Setting the Turning the variable osc
Summary of the content on the page No. 8
E D O M Using Your Ceramic Tower Heater Remove any promotional material or Setting the Heating Mode packaging from the heater. Unwind the cord to its full length and place the heater on a firm, level surface in a stable upright position. Visually inspect the air inlet and outlets to ensure there are no blockages. When unpacking the heater, check to see you have received the remote control, before discarding the packaging. Turning Your Heater On Plug the cord into a 230V or 240V power
Summary of the content on the page No. 9
T T E E E D M M O P P M R R E E E E The temperature can be set between NOTE: This heater features a 15° C and 35°C. tip-over switch. If the heater When the air temperature reaches tips over, it will automatically 2-3°C above the set temperature, switch off. Once placed back the heater will automatically cut out, into the upright position, the although the fan will continue to run heater will be in standby mode, for approximately 15 seconds to cool and the settings will need to be th
Summary of the content on the page No. 10
Using Your Ceramic Tower Heater continued Safety Features This heater includes an audible alarm to warn that parts of the heater are overheating. If the alarm sounds, immediately turn the heater off and inspect for any objects on or adjacent to the heater that may cause high temperature. DO NOT OPERATE THE HEATER WITH THE ALARM SOUNDING. ThermoGuard Overheating Safety Device Your heater is fitted with a safety device that switches off the heater in the event of overheating. Should thi
Summary of the content on the page No. 11
Care and Cleaning Ensure that the heater is switched off and disconnected from the power point before cleaning. Use a clean, dry cloth to clean the external surfaces of the heater. If the heater has collected dust or dirt inside the unit or around the elements, have the unit cleaned by a qualified service agent. Do not operate the heater in this condition. Do not attempt to open the case of the heater at any time as there are no customer serviceable parts inside. When not in use, store
Summary of the content on the page No. 12
Kambrook 12 Month Replacement Warranty In Australia, this Kambrook Replacement Warranty The Kambrook Replacement Warranty does not does not affect the mandatory statutory rights apply to any defect, deterioration, loss, injury or implied under the Trade Practices Act 1974 damage occasioned by, or as a result of, misuse and other similar State and Territory legislation or abuse, negligent handling or if the product has relating to the appliance. It applies in addition been used other than in
