Summary of the content on the page No. 1
400-401-000-B (TH401) 5 x 3.5 EFS.book Page 1 Thursday, July 9, 2009 2:24 PM
Owner’s Guide
Guide du propriétaire
Guía del usuario
TH401
Non-programmable Thermostat
Thermostat non programmable
Termostato no programable
400-401-000-B
Summary of the content on the page No. 2
400-401-000-B (TH401) 5 x 3.5 EFS.book Page 2 Thursday, July 9, 2009 2:24 PM Need Help? We are here to help. Call 1-800-831-2823. Besoin d’aide? Nous sommes là. Composez le 1 800 831-2823. ¿Asistencia? Estamos aquí para ayudarlo. Llame al 1 800 831-2823.
Summary of the content on the page No. 3
400-401-000-B (TH401) 5 x 3.5 EFS.book Page 0 Thursday, July 9, 2009 2:24 PM Owner’s Guide Table of contents About your new thermostat ........................................................................................... 1 Temperature display and setting ................................................................................... 2 Removing the faceplate................................................................................................. 3 Wiring .....................
Summary of the content on the page No. 4
400-401-000-B (TH401) 5 x 3.5 EFS.book Page 1 Thursday, July 9, 2009 2:24 PM Owner’s Guide About your new thermostat This thermostat can be used to control an electric heating system such as a baseboard heater, a radiant floor, a radiant ceiling, a convector or a fan-forced heater. The thermostat CANNOT be used with: • a resistive load under 0.83 A • a resistive load over 10.4 A • a system driven by a contactor or a relay (inductive load) • a central heating system SUPPLIED PARTS • One (1) th
Summary of the content on the page No. 5
400-401-000-B (TH401) 5 x 3.5 EFS.book Page 2 Thursday, July 9, 2009 2:24 PM RTH401 Temperature display and setting Appears when the setpoint is displayed Temperature display Appears when the thermostat is configured for 5-minute cycles. The thermostat must be set to this configuration if it is controlling a fan-forced heater. Up button Heating intensity indicator. Down button (No image appears when heating is off.) The thermostat normally displays the actual (ambient) temperature. • To
Summary of the content on the page No. 6
400-401-000-B (TH401) 5 x 3.5 EFS.book Page 3 Thursday, July 9, 2009 2:24 PM Owner’s Guide Removing the faceplate TURN OFF POWER OF THE HEATING SYSTEM AT THE MAIN POWER PANEL TO AVOID ELECTRIC SHOCK. Loosen the screw holding the faceplate to the base. The screw cannot be completely removed and remains captive on the base. Remove the faceplate from the base by pulling the bottom half. 3 ENGLISH
Summary of the content on the page No. 7
400-401-000-B (TH401) 5 x 3.5 EFS.book Page 4 Thursday, July 9, 2009 2:24 PM RTH401 Wiring Connect any one of 4-wire installation 2-wire installation thermostat wires to the heater (load) wire and the other one to the power supply wire using solderless connectors for copper wires. (The thermostat wires are non-polarized; either wire can be connected to the load or to the power supply.) NOTE: All cables and connections must conform to the local electrical code. Special CO/ALR solderless connec
Summary of the content on the page No. 8
400-401-000-B (TH401) 5 x 3.5 EFS.book Page 5 Thursday, July 9, 2009 2:24 PM Owner’s Guide Installing the faceplate Install the base onto an electrical box. Reinstall the faceplate on the base and secure it in place with the screw. NOTE: Keep the air vents of ther- mostat clean and unobstructed at all times. 5 ENGLISH
Summary of the content on the page No. 9
400-401-000-B (TH401) 5 x 3.5 EFS.book Page 6 Thursday, July 9, 2009 2:24 PM RTH401 Setup procedure The setup menu is shown on the following page. Press the Up and Down buttons simultaneously for three seconds to enter the setup menu. Press the Up or Down button to change the option. Press the Up and Down buttons simultaneously for one second to advance to the next parameter. When the last parameter is displayed, press the Up and Down buttons for three seconds to save any changes and e
Summary of the content on the page No. 10
400-401-000-B (TH401) 5 x 3.5 EFS.book Page 7 Thursday, July 9, 2009 2:24 PM Owner’s Guide Setup menu Display and Parameter Options default setting •°C Temperature display format •°F • Std (conventional heating): 15 seconds Heating cycle • Fan (fan-forced heating): 5 minutes Minimum setpoint 5°C - 20°C (41°F - 68°F) Maximum setpoint 15°C - 30°C (59°F - 86°F) 7 ENGLISH
Summary of the content on the page No. 11
400-401-000-B (TH401) 5 x 3.5 EFS.book Page 8 Thursday, July 9, 2009 2:24 PM RTH401 In case of difficulty PROBLEM SOLUTIONS Thermostat is hot. This is normal. Remediate if any the following conditions exists: • The thermostat is exposed to air draft. Displayed tempera- • The sticker on the thermostat’s screen has not been removed. ture is wrong. • The thermostat is located near or above a heat source such as a light dimmer. The thermal protection device on the heater has temporarily Display
Summary of the content on the page No. 12
400-401-000-B (TH401) 5 x 3.5 EFS.book Page 9 Thursday, July 9, 2009 2:24 PM Owner’s Guide Specifications - Supply: 120/240 VAC, 50/60 Hz - Minimum load: 0.83 A (resistive only) 200 W @ 240 VAC 100 W @ 120 VAC - Maximum load: 10.4 A (resistive only) 2500 W @ 240 VAC 1250 W @ 120 VAC - Display range: 0°C to 50°C (32°F to 122°F) - Setpoint range: 5°C to 30°C (40°F to 85°F) - Storage: -20°C to 50°C (-4°F to 120°F) - Heating cycle length: 15 seconds / 5 minutes (user-selectable) - Permanent memor
Summary of the content on the page No. 13
400-401-000-B (TH401) 5 x 3.5 EFS.book Page 10 Thursday, July 9, 2009 2:24 PM RTH401 Warranty Honeywell warrants this product, excluding battery, to be free from defects in the workmanship or materials, under normal use and service, for a period of three (3) years from the date of purchase by the consumer. If at any time during the war- ranty period the product is determined to be defective or malfunctions, Honeywell shall repair or replace it (at Honeywell's option). If the product is defect
Summary of the content on the page No. 14
400-401-000-B (TH401) 5 x 3.5 EFS.book Page 11 Thursday, July 9, 2009 2:24 PM Owner’s Guide Customer assistance If you have any questions about the product installation or operation, contact us at: 705 Montrichard Saint-Jean-sur-Richelieu, Quebec J2X 5K8 Canada Tel.: 1-800-831-2823 Fax: (450) 358-4650 Email: aube.service@honeywell.com For more information on our products, go to www.aubetech.com 11 ENGLISH
Summary of the content on the page No. 15
400-401-000-B (TH401) 5 x 3.5 EFS.book Page 0 Thursday, July 9, 2009 2:24 PM Guide du propriétaire Table des matières À propos du thermostat ................................................................................................. 1 Affichage et réglage de la température ......................................................................... 2 Enlever la façade........................................................................................................... 3 Branchement ..
Summary of the content on the page No. 16
400-401-000-B (TH401) 5 x 3.5 EFS.book Page 1 Thursday, July 9, 2009 2:24 PM Guide du propriétaire À propos du thermostat Ce thermostat a été conçu pour commander un appareil de chauffage électrique tel qu’une plinthe chauffante, un plancher chauffant, un plafond radiant, un convecteur ou un ventiloconvecteur. Ce thermostat NE PEUT être utilisé avec : • une charge résistive inférieure à 0,83 A • une charge résistive supérieure à 10,4 A • un appareil muni d’un contacteur ou d’un relais (charge
Summary of the content on the page No. 17
400-401-000-B (TH401) 5 x 3.5 EFS.book Page 2 Thursday, July 9, 2009 2:24 PM RTH401 Affichage et réglage de la température Apparaît lorsque la consigne est affichée Affichage de la température Apparaît lorsque le thermostat est configuré pour des cycles de 5 minutes. S’assurer d’utiliser cette configuration si vous avez un ventiloconvecteur. Bouton Haut Indicateur de l’intensité du Bouton Bas chauffage (l’absence de l’image indique l’arrêt du chauffage.) Le thermostat affiche normalemen
Summary of the content on the page No. 18
400-401-000-B (TH401) 5 x 3.5 EFS.book Page 3 Thursday, July 9, 2009 2:24 PM Guide du propriétaire Enlever la façade COUPER L’ALIMENTATION DU SYSTÈME DE CHAUFFAGE AFIN D’ÉVITER TOUT RISQUE DE CHOC ÉLECTRIQUE. Desserrer la vis qui retient la façade du thermostat à la base. La vis ne peut être complètement enlevée et reste captive sur la base. Séparer la façade de la base en tirant sur la partie inférieure du thermostat. 3 FRANÇAIS
Summary of the content on the page No. 19
400-401-000-B (TH401) 5 x 3.5 EFS.book Page 4 Thursday, July 9, 2009 2:24 PM RTH401 Branchement Relier n’importe quel fil du Installation à 4 fils Installation à 2 fils thermostat au fil de l’appareil de chauffage (charge) et l’autre fil au fil de l’alimentation en utilisant des connecteurs sans soudure pour fils de cuivre. (Les fils du thermostat ne sont pas polarisés; le sens du branchement n’a donc aucune importance.) NOTA : Tous les câbles et les raccordements doivent être conformes au co
Summary of the content on the page No. 20
400-401-000-B (TH401) 5 x 3.5 EFS.book Page 5 Thursday, July 9, 2009 2:24 PM Guide du propriétaire Installer la façade Installer la base sur une boîte électrique. Remettre la façade du thermostat sur la base et resserrer la vis. NOTA : Garder les ouvertures d’aération du thermostat propres et dégagées en tout temps. 5 FRANÇAIS
