Summary of the content on the page No. 1
DIGITAL BLUETOOTH THEROMETER
PBT
Summary of the content on the page No. 2
Index 1. Introduction 1 2. Important Information Before Use 2 3. Product Identification 3 4. Description of LCD Display 3 5. Battery Installation 4 6. Changing Modes (°C/°F Switchable) 5 7. Tips for Measuring HumanTemperature 6 8. Measuring Body Temperature in the Ear 7 9. Memory Function 10 10. Operating The Bluetooth Function 11 11. Care and Maintenance 14 12. Applied Standards 14 13. Error Codes 15 14. Technical Specifications 15 15. FCC Statement 16 16. EMC Tables 18
Summary of the content on the page No. 3
Introduction Utilizing infrared technology, this thermometer takes temperatures in seconds by measuring heat generated by the ear canal or other objects .This produc t c onforms to the provisions of the EC directive MDD(93/42/EEC).Its advantages include: 1. Wireless communication : Bluetooth (class 2) 2. Intended use: For home, clinic, and hospital use to determine human body temperature. 3. Illuminated back-light display 4. 10 user memory 5. °C/°F switchable function 6. Probe cover fr
Summary of the content on the page No. 4
Important Information Before Use When using this product, please be sure to follow all the notes listed below.Any action against these notices may cause injury or affect the accuracy. 1. Do not disassemble, repair, or remodel the thermometer. 2. Be sure to clean the thermometer lens each time after usage. 3. Avoid direct finger contact with the lens. 4. No modification of this equipment is allowed. 5. It is recommended that user take 3 temperatures. If they are different,use the average rea
Summary of the content on the page No. 5
Product Identification Probe Tip LED (Wireless connecting indicator) Wireless Reset Key Power & Wireless Power Button Measure MEMORY Button Recall Button LCD Display Battery compartment lid Description of LCD Display Degrees of Temperature Memory Symbol Celsius and Sets of Scale Records Fahrenheit Scale Scan in Smiling face Progress Indicating temperature Low battery Warning is lower than 38°C (100.4°F) Frowning face Indicating temperature is equal or higher than 3 38°C (100.4°F)
Summary of the content on the page No. 6
Battery Installation Low battery warning: When the battery power becomes low, the low battery symbol “” will appear on the display.The thermometer can still be used during this time, but the batteries should be replaced as soon as possible. If the batteries run out completely,“Lo” will be displayed along with the low battery symbol. In this case, the batteries will need to be replaced before using the thermometer again. Replacing the Battery: 1. Use a Phillips head screwdriver to loosen batter
Summary of the content on the page No. 7
Changing Modes (°C/°F Switchable ) This thermometer can display result in either degrees Fahrenheit(°F) or degrees Celsius(°C). Changing °C/ °F, please make sure the device is in power on condition. Press the Power/Scan button, hold it, and then press the Memory button to toggle between °C and °F. 5
Summary of the content on the page No. 8
Tips for Measuring Human Temperature Bear in mind that the thermometer needs to have been in the room in which the measurement is taken for at least 30 minutes before use. •Some people produce different readings in their left and right ear. In order to record temperature changes, always measure a person’s temperature in the same ear. •The ear thermometer may be used by children only under adult supervision. Measurement is usually possible over the age of 6 months. In infants under 6 months, t
Summary of the content on the page No. 9
Measuring Body Temperature in the Ear 1. Remove the front cover: Remove the cover cap: Remove the cap by gently pushing it up (1) and then pulling it off forwards (2). 2. Press the Power button to switch the thermometer on. Following a successful self test, the device emits two short beeps. 3. Make sure that the sensor tip and also the ear canal are clean. As the ear canal is slightly curved, you have to pull the ear slightly up and backwards before inserting the sensor tip. This is important
Summary of the content on the page No. 10
Measuring Body Temperature in the Ear • Under 1 year: Have child lay flat with the head sideways, so that the ear is facing upwards. Gently pull the ear straight back. •1 year +: Stand behind and slightly to the side of the child/adult. Gently pull the ear up and back to straighten the ear canal. 5. You may take out the device to read the measurement result. 6. The backlight display will remain light for approximately 5 seconds each time the “Power & Measure” button is pressed, after each rea
Summary of the content on the page No. 11
Measuring Body Temperature in the Ear The Readings: If the temperature measurement is below 38°C, a “Smiling Face ” will be appear next to the reading. If the reading is 38°C or above, a “Frowning Face ” will be displayed. 9
Summary of the content on the page No. 12
Memory Function Memory Recall: You can recall up to 10 measurements of all currently stored measurements in memory to share with your physician or trained healthcare professional. 1. While in power on mode, press once briefly on the “Memory” button, then pass it again to show the last measurement accompanied by “” symbol. 2. Continue to press the “Memory” button to view the next previously stored measurement, so “” then all the way to “”. 3. Automatically on the 11th measurement: when the 10 mem
Summary of the content on the page No. 13
Operating The Bluetooth Function 1. Turn the ear thermometer to the back side. 2. Turn on the wireless power (From "off" to "on"), while the thermometer searches for other Bluetooth compatible devices, the LED (connection indicator) will flash. When the device connects successfully to health monitoring devices and Bluetooth-capable devices, such as a computer, PDA, or mobile phone, the LED will remain lit. At conclusion of temperature measurement, the reading will be sent to the health monitor
Summary of the content on the page No. 14
Operating The Bluetooth Function WhatYou Need: The host computer or terminal system to run Serial Port Profile (SPP) -A personal computer with Operating system: Windows 95 or later -A Smart Phone with Android system - Others: PDA, etc. Please refer to the instruction manual of your personal computer for how to install Serial Port Profile (SPP). Bluetooth LED: FAST BLINKING: indicate this UT-302 PBT is at linking state waiting to be linked by other Bluetooth terminal system like Smart Phone.
Summary of the content on the page No. 15
Operating The Bluetooth Function Communications Interface: Using Bluetooth communications terms, the UT-302PBT is a slave device. To connect the UT-302PBT to a master device you must initiate the connection by first pairing with the UT-302PBT. To complete the pairing process the “0000” number must be provided to the master as the Bluetooth Pass Key (Bluetooth PIN Code). Once the pairing is complete the UT-302PBT will automatically reconnect to the master device when possible. The fou
Summary of the content on the page No. 16
Care and Maintenance • Probe and Tip: Clean the probe and tip with an alcohol swab before and after each measurement. • Thermometer: Use a soft, dry cloth to clean thermometer body. Never use abrasive cleaning agents, thinners or benzene for cleaning. Do not scratch the surface of the probe lens or the display. Do not expose the thermometer to extreme temperatures, humidity, direct sunlight, or shock. Applied Standards This product conforms to the provisions of the EC directive MDD (93/42/EEC).T
Summary of the content on the page No. 17
Error Codes When a malfunction or incorrect temperature measurement occurs, an error message will appear as described below. LCD Display Cause Solution Operate the thermometer The temperature measured is only between the lower than 34°C (93.2°F) specified temperature ranges. If necessary, clean the sensor tip. In the event of a repeated The temperature measured is error message, contact higher than 43°C (109.4°F) your retailer or Customer Services. Operate the thermometer The operating temperatu
Summary of the content on the page No. 18
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that i
Summary of the content on the page No. 19
FCC Statement 6. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 7. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This tra
Summary of the content on the page No. 20
EMC Tables Guidance and manufacturer's declaration-electromagnetic emission The UT-302PBT Thermometer is intended for use in the electromagnetic environment specified below.The customer or the user of the UT-302PBT Thermometer should assure that it is used in such an environment. Emissions test Compliance Electromagnetic environment guidance RF emissions CISPR 11 Group 1The UT-302PBT Thermometer uses RF energy only for its internal function. Therefore, its RF emissions are very low and ar
