Summary of the content on the page No. 1
Operations Manual
TEC LOAD CELL SCALE
(WITH LABEL PRINTER) ’
.
MODEL SL66 SERIES
(US-V Version)
r&c TEC CORPORATION
Summary of the content on the page No. 2
EMl-31055 WARNING This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment i
Summary of the content on the page No. 3
EMl-31055 TABLE OF CONTENTS Page ............................................. l INTRODUCTION 1 . ............................................. PRECAUTIONS 1 .............................................. 1. .%‘EClFlCATlONS 2 .................................................. 3 2. OVERVIEW ............................................. 3 3. REMOTEDISPLAY ................................................. 4 4. KEYLAYOUT 4 ..................................... 5. KEY AND LAMP FUNCTI
Summary of the content on the page No. 4
EMl-31055 INTRODUCTION We thank you very much for purchasing the TEC Electronic SL66 Series Scale. This series has been designed with TEC reliability to offer a cost efficient system for a modest investment. The SL66 (with thermal printer) takes advantage of the latest technology in microprocessors. Because of this, the decreased cabinet size permits the system to be placed virtually anywhere in your store. Your deli and specialty departments can enjoy these high quality reliable TEC prod
Summary of the content on the page No. 5
EMl-31055 1. SPECJFICATIONS Items SL66-3OL-US-V Maximum Capacity 30 Ibs Minimum Scale Division 0.01 Ibs. Using Weight Range 0.20 - 30 lbs. Display Range O- 30.05 Ibs Tare 0.0 1 - 30 Ibs. Unit Price presettable $0.0 1 - 99.99 Minimum Price Display $0.0 1 Power Requirement AC 120V ? lo%, 60 Hz Current Consumption 12OV 1.5A 60 Hz Temperature Limits 32” - 104°F Relative Humidity 35% - 85% RH (No condensation) Dimensions (approx.) 15.7” (w) X 17.2” (D) X 18.7” (H) Weight 33.1
Summary of the content on the page No. 6
EMl-31055 2. OVERVIEW Remote display .Power switch Speed keyboard stable leg L-- Operation keyboard 3. REMOTE DISPLAY COMMODITY NAME 1 1 -3-
Summary of the content on the page No. 7
EMl-31055 4. KEY LAYOUT ‘ROG N;fuT VOID I I :& TEST ZERO MSG FEED NOTE: The characters (1 - 90) indicated on the speed keys are shown for the convenience of explanation in this manual. The indications on the actual unit are not as shown in this illustration. 5. KEY AND LAMP FUNCTIONS Name of Key & Lamp Function Mode Switch (I) “AUTO” position: This position is used to issue regular scale labels. AUTO When the weight becomes stable, the label will automatically be issued. “MANUAL
Summary of the content on the page No. 8
EMl-31055 Function Name of Key & Lamp This key is used for clear-entry of numeric keys, return the scale CLEAR Key condition to the normal weighing mode, release the scale from the C SAVE or ERROR mode, and suspend batch printing. 0 This key is used to subtract tare weight. TARE Key T r Ll --.-I-. 4-- This key is used to select a PLU number or return to the initial mode. PLU Key PLU El PRINT/VERIFY Key For issuing Total labels. If the Label issue mode switch is set to the MAN
Summary of the content on the page No. 9
EM1-31055 This key is used to adjust the ZERO point. NET Lamp Lights when tare is subtracted. PREPACK Lamp Lights when the SAVE key is depressed. <+$ ERROR Lamp Lights when this machine is improperly operated or there is a function error. -6-
Summary of the content on the page No. 10
EMl-31055 6. CONTROL LOCK The control lock has seven marked positions. There are two control keys which will operate these locks. Manager Key This key (MA) will access the PROG/CMT, REG, M. DOWN. and REWRAP positions. SE Key This key (SE) will access all seven positions. Each of the following positions on the control lock serves a different function. PROG. CMT. ~ With the manager key in this position, it is possible to program data in the PLU file, Store Address, Message, Printing P
Summary of the content on the page No. 11
EMl-31055 7. LEVEL ADJUSTMENT Set the scale on a stable and level surface. Level Level Gauge the scale by turning the adjustable legs so that the air bubble is inside the center circle. Incorrect Correct When the air bubble moves toward the left side, When the air bubble moves toward rear, turn the front adjustable legs clockwise. turn the right adjustable legs clockwise, 8. CLEANING THE PRINT HEAD If the print head is dirty, clear printing will not be produced. It is recommended to
Summary of the content on the page No. 12
EMl-31055 9. REMOVAL AND REPLACEMENT OF LABEL ROLL (for On-demand printing mode) 1. Remove the printer cover and right side cover. Then push the head-up lever in the direction indicated by the allow. 2. Pull out the label cassette and remove the core’ of the label roll and the label backing paper. NOTE: To remove the label backing paper, loosen the paper by turning the paper winding shaft counterclockwise and remove the paper stopper. roll on the label cassette. the feed key to confi
Summary of the content on the page No. 13
EMl-31055 0 Label (for Batch printing mode) and Report Paper Threading Roll stopper Label or Report paper 10. NOTES BEFORE STARTING OPERATION (1) Be sure to plug the power plug into an AC outlet. (2) When the power switch is turned on! the scale goes through the test scanning sequence, such as 0000, 0000, 0000, then 11 1 1, 1 11 1, 1 1 1 1 l..... and zeros appear on the displays. (3) While the scale is in the test sequence, do not put anything on the platter. (4) Do not move the unit wh
Summary of the content on the page No. 14
EMl-31055 11 OPERATION PROCEDURE 11-l. Weighed Article Registration Control lock : REG. M.DOWN, or REWRAP Mode SW(2) : WEIGH Example A) In the case of an article for which PLU # 100 and a unit price of s3.00/lb are set in speed key q . 1 ENTER THE PLU # I io.oollP Depress the speed key. t T-BONE STEAK 1 I Place an article on. T-BONE STEAK 1 (Ex. 5.00 lbs) pzqr-G-lpi5q I 1 AUTO AUTO MANUAL MANUAL The label is issued. T The label is issued. 4601-h BINKERS CIRCLE AT (Samp
Summary of the content on the page No. 15
EMl-31055 Example B) In the case of an article for which a unit price of S2.5O/lb is set for PLU # 505. t ENTER THE PLU # I I bplp inn Enter the PLU #. /5// 1 ENTER THE PLU # I pEiq~]Ip I Depress: PLU I 1 LAMB SIRLOIN I r Place an article on< T I t LAMB SIRLOIN I (Ex. 7.00 Ibs) A”‘~ :;,,, L 1 J MAX: gl,, MANUAL The label is issued. PRT/. ‘i The label is issued. (Sample label) - 12 -
Summary of the content on the page No. 16
EMl-31055 11-2. By Count Registration Control lock : REG, M.DOWN, or REWRAP Mode SW(2) : BY COUNT Example A) In the event that a price of $1.80/l 2 pcs is set for PLU #lOS. ENTER THE PLU# 1 Enter the PLU#. kRUSTY ROLLS I 1 I PLU cl I-----mm PAT/* cl Press to suspend label issue resume label temporarily. Press to cancel C label issue. cl PLU data is returned to PLU cl the PLU file. (Sample label) - 13 -
Summary of the content on the page No. 17
EMl-31055 Example 6) In the case of purchasing 20 pcs of an article for $1 .OO of price for 4 PCS. (In the event SPLIT PRICE that a price of $1.00/4 pcs is set for PLU # 1 13.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iENTER THE PLU# 1 Enter the PLU# LIFEI I PLU cl I Enter the quantity of purchase. (Max.2 digits) Elm I PRT/* I-----IIppxq 0 AUTO 7 The label is issued in Single label is issued. succession after peeling it. I DONUTS PACKED ON
Summary of the content on the page No. 18
EMl-31055 11-3. Fix Price Registration Control lock : REG, M.DOWN, or REWRAP Mode SW(2) : FIX Example A) In the event that PLU #3036 and a unit price of $3.80/lb are set in speed key q . 1 ENTER THE PLU # I piqp-jpE6q 7 Depress the speed key. q SMOKED SALMON CHUNKS ~o.oollpziq , Place an article on. SMOKED SALMON CHUNKS pziii-jn~~ MANUAL The lab!!+ The label is issued. SHOKED SALMON CHlltlKS 1 [4401-A BANKERS CIRCLE AT I (Sample label) - 15-
Summary of the content on the page No. 19
EMl-31055 Example 8) In the event that an open unit price is set for PLU # 205 ENTER THE PLU # hpl-1 Enter the PLU #. Depress: Enter (he price. PORK LOIN RIB CHOPS Place an article on. - PORK LOIN RIB CHOPS (Ex. 1.50 Ibs) 1 MANUAL AUTO The label is issued. The label is issued. ] PORK LOIN RIB CHOPS ( PACKCOON AU6 25 SELL BY AU6 29 1 1 4401-A BANKERS CIRCLE Al (Sample label) - 16 -
Summary of the content on the page No. 20
EMl-31055 1 l-4. Preset Count Registration and Operation Control lock : REG. M.DOWN, or REWRAP Mode SW(2) : WEIGH, BY COUNT, or FIX Example A) When Mode SW. (2) is at the ‘WEIGH” position 1 ENTER THE PLU # I pzqp-j1[p Depress: 1 PRESET COUNT BALANCE 1 1 Set the number of labels PRESET COUNT BALANCE =a 0 (Max. 99 labels) ENTER THE PLU # I Depress: Io.ool~l~l 1 Enter the PLU #. : SHRIMPS [ 0.00 1 1 0.90 1 1 0.00 J [ SHRIMPS I SAVE PLU data is saved. cl (o.00~~ -g PREP
