Escali C6630 user manual

Summary of the content on the page No. 1

PROFESSIONAL DIGITAL COUNTING SCALE

C - Series

OPERATING MANUAL




INTRODUCTION

Congratulations on your purchase of our Professional Digital Counting Scale.

In order to ensure the scale continues to deliver peak performance, please
read these operation instructions carefully and thoroughly prior to initial usage.




IMPORTANT

1. Read all instructions before operating the scale.
2. Follow the basic safety precautions for all office equipment when using this
sc

Summary of the content on the page No. 2

PARTS DESCRIPTION Stainless Steel Scale Platform Weight Display Bubble Leveler Unit Weight Display Total Pcs Numeric and Display Function Keys Level Adjusting AC Socket feet Unit Weight Upper & Setting Lower Limit Setting Cancel Upper & Lower Limit Unit Weight Recall Rechargeable Power On/off Battery Door Switch SYMBOLS 1) Insufficient sample size 2) Insufficient unit weight 3) Battery Low

Summary of the content on the page No. 3

5) Cancel Accumulating MC OPERATION LEVEL THE SCALE When the scale is put to use at a new place, adjust the level of the scale by turning the 4 level adjusting feet until the bubble is located in the middle position of the bubble.leveler. ACTIVATING THE SCALE 1. Turn on the “power on/off switch” 2. All LCD displays will light up and display 9,8,7,6,5,4,3,2,1,0,A,B,C,D,E,F in turn until the LCD displays as shown : SET UP UNIT WEIGHT Example : 4 pcs of pencil : (A). Unit we

Summary of the content on the page No. 4

(B). Unit weight of item is known 1. Turn on the scale. 2. Input the unit weight of the samples. 3. Press “UNIT WGT” key. The unit weight of the sample is stored in the scale. COUNTING 1. The scale is powered on 2. Put objects on the scale platform 3. Press “UNIT WGT” key. 4. The quantity of the objects will be shown on the TOTAL (PCS) display. ACCUMULATE COUNTING: 1. Repeat COUNTING procedures above (1) to (4). 2. Press “M+” key. 3. The ‘UNIT WEIGHT”

Summary of the content on the page No. 5

5. Take off the first samples and put the second samples (e.g. 30 pcs) on the scale platform. 6. Press “M+” key. 7. The ‘UNIT WEIGHT” display will show followed by . 8. Repeat the procedures until all the samples are counted. 9. Press “ZERO” key and “CE”, to clear the “WEIGHT” and “UNIT WEIGHT” display. 10. The total accumulated quantity will be displayed by pressing “M+” key. 11. Press “MC” key to cancel the accumulated quantity.

Summary of the content on the page No. 6

UPPER AND LOWER QUANTITY LIMIT SETTING 1. Turn the scale on. 2. Press “PRESET QTY” key, the 3 LCD will show as below. 3. Input the upper limit quantity in the “UNIT WEIGHT” display. Then press “M+” key to confirm. 4. Input the lower limit quantity in the “TOTAL (PCS)” display. Then press “M+” key to confirm. 5. Place the samples on the scale platform. When the quantity arrives at the upper limit, the scale will alarm with a beep sound. The “WEIGHT” display will sho

Summary of the content on the page No. 7

BATTERY STATUS When the battery is low, a symbol will be displayed. Recharge the battery by plugging the AC cable to the AC main. MAINTENANCE Clean with a soft cloth. Do not immerse directly into water or detergent, scrub with abrasive material or use corrosive cleanser. TECHNICAL SPECIFICATIONS Model No. C136 C3315 C6630 Maximum Capacity 6kg / 13lb 15kg / 33 lb 30kg / 66lb Graduation 0.5g / 0.1oz 1g / 0.1oz 2g / 0.1oz Minimum sample weight 20d Minimum unit w