Adcom ACE-615 user manual

Summary of the content on the page No. 1

R
P
E
R
K
E
A
S
E
S
R
T
B
Introduction
The ACE-615 is a very carefully engineered product designed to protect
your audio, video, and computer systems while providing them with clean
AC power. The surge protection is a nonsacrificial patented technology
(U.S. patents 4,870,534 and 4,870,528) that conforms to the strictest
Federal Guidelines for surge protection.
ACE-615
ACE-615 AC enhancer accessories amplifiers unswitched
bcde
fb fa gb ga 1@
circuit breaker
Surge Protector and AC Enhancer model

Summary of the content on the page No. 2

system can be grounded by simply connecting a wire Safety Instructions Unpacking between the chassis of any system component and the Before each ACE-615 left the factory, it was carefully • Read all instructions and store them for future reference. ACE-615 grounding screw 1#. (The remaining compo- inspected for physical imperfections as a routine part of • Plug unit into polarized AC outlets only. Contact an nents will be grounded to the ACE-615 through the ADCOM’s systematic quality control. Th

Summary of the content on the page No. 3

to AC outlet to preamp amplifier one amplifier two vcr preamp DVD player compact disc player laser disc player television from wall to device R P E R K E A S E S R T B Operation Front Panel Control indicating it is waiting for an external 12v trigger to power Press the ACE-615 power button b to activate the unit. on. Turn on the component supplying the 12v trigger. The The unswitched front panel LED e indicates that AC The power LED b, accessories LED c, and amplifiers ACE-615 power button LED b

Summary of the content on the page No. 4

Trouble shooting Symptom Possible Causes -Unswitched LED does not come on when the ACE-615 AC power cord is -Outlet may be shut off at the main breaker box plugged into an outlet -Power button pushed in, but switched outlets are off and power LED glows -Unit may be in standby mode amber -Remove any plug in the 12v trigger jack -ACE-615 does not respond to 12v input -Power button must be pressed in for remote activation -The trigger voltage maybe outside the allowable + (5-12) volts - -No delay