Graco Inc. SG3-A user manual

Summary of the content on the page No. 1

3Z9097
Rev. A
INSTRUCTIONS –
–
SG3-E, SG3-A Airless Spray Guns
3600 psi (248 bar, 24.8 MPa) Maximum Working Pressure
SG3-E
243238, A
Reversible Tip Guard, 515 Tip
SG3-A
243382, A
Reversible Tip Guard, 515 Tip
All models not available in all countries
TI0103
243012
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441
Graco Inc. is registered to I.S. EN ISO 9001

Summary of the content on the page No. 2

WARNING Fire and explosion hazard: Solvent and paint fumes can ignite or explode. To help prevent a fire and explosion:
Use in an extremely well ventilated area.
Eliminate all ignition sources; such as pilot lights, cigarettes and static arcs from plastic drop cloths. Do not plug or unplug power cords or turn lights on or off in spray area.
Ground Sprayer, object being sprayed, paint and solvent pails.
Hold gun firmly to side of grounded pail when triggering into pail.
Use only conductive a

Summary of the content on the page No. 3

// CONTROLS / Needle Adjustment Trigger Lock / / / / / Tip Guard / / / Trigger / / Tip / / / TI0103 / / PRESSURE RELIEF / Follow 1–5 when you 12 stop spraying. 3 4 5 / / ALIGN SPRAY / 12 3  

Summary of the content on the page No. 4

ADJUST SPRAY / / / WARNING 1234 CAUTION / CLEAR CLOG / / / / WARNING 1 23 / REPLACE NEEDLE / / 12 3 4 OLD 56 7 8 SILICON LOOSE NEW CLEAN GREASE  

Summary of the content on the page No. 5

Grease 910 11 26–32 ft–lb (19–24 N.m) / ADJUST NEEDLE / / 112 3 4 PRIME SPRAYER 3/4 56 A IF THEN IF THEN B ADJUST NEEDLE RELEASE SQUEEZE 7 A IF THEN THEN IF B ADJUST NEEDLE SQUEEZE  

Summary of the content on the page No. 6

Parts Drawing / / 243238, A 10 26 243382, A 1 8 2 1 7 15a 2 6 35 Included with 1 1 2 15 Included with 33 23 33 22 TI0104 24 5 Parts List / / / Ref. Ref. No. Part No. Description Qty. No. Part No. Description Qty. 1 218070 KIT, repair, gun 1 33 Kit, replacement, trigger 2 243161 GUARD, tip, RAC 5 1 243553 243382 1 4 GUARD, trigger 243639 243238 1 195495 243238 1 34 222385 CARD, WARNING, not shown 1 190975 243382 1 35 290230 LABEL, WARNING, 243382 only 1 5 238200 KIT, swivel 1 6 218

Summary of the content on the page No. 7

Graco Standard Warranty Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale by an authorized Graco distributor to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be def

Summary of the content on the page No. 8

ADDITIONAL WARRANTY COVERAGE Graco does provide extended warranty and wear warranty for products described in the “Graco Contractor Equipment Warranty Program”. TO PLACE AN ORDER OR FOR SERVICE, contact your Graco distributor, or call 1–800–690–2894 to identify the nearest distributor. All written and visual data contained in this document reflects the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice. Sales Offi