Graco Inc. MPFHVLP user manual

Summary of the content on the page No. 1

MPFHVLP
THE SPRAY GUN PEOPLE
FOR PRODUCT INFORMATION CALL:
Mini Pressure Feed Spray Gun
1-800-742-7731
Important Safety Instructions
Read all warnings and instructions in this manual.
Save these instructions.
Maximum Air and Fluid Inlet Pressure: 50 psi (345 kPa, 3.4 bar)
Maximum HVLP Compliant Air Pressure: 40 psi (276 kPa, 2.8 bar)
Part No. 7045 Spray Gun
For pressure feed spraying of automotive colors and clears.
II 2 G
SHARPE MANUFACTURING COMPANY • P.O. BOX 1441, MINNEAPOLIS, MN 55440-1441

Summary of the content on the page No. 2

WARNING FIRE AND EXPLOSION HAZARD Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help prevent fire and explosion: • Use equipment only in well ventilated area.  Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and plastic drop cloths (potential static arc).  Keep work area free of debris, including solvent, rags and gasoline.  Do not plug or unplug power cords or turn lights on or off when flammable fumes a

Summary of the content on the page No. 3

MPFHVLP SPRAY GUN Flushing Setup WARNING  Set shop air pressure regulator (not supplied) according to paint manufacturer’s recommendation. See maximum air and fluid pressures on cover. Read warnings, page 2.  Make sure no air restrictions, such as low-volume cheater- valves, obstruct the air flow. If an air adjusting valve is Flush before using the equipment, before changing colors, and desired, use a SHARPE Air Adjusting Valve 24AAV (part when you are done spraying. Use solvent that is

Summary of the content on the page No. 4

MPFHVLP SPRAY GUN 2. Use a rag moistened in solvent to wipe outside of gun. Cleaning and Maintenance 3. Blow dry gun inside and out. Lubricate gun as described in Spray Gun Maintenance. WARNING Cleaning Nozzle and Air Cap CAUTION Follow Pressure Relief Procedure when you stop spraying and before cleaning, checking, or servicing equipment. Read  Trigger gun whenever you tighten or remove nozzle to warnings, page 2. avoid damaging needle seat and nozzle.  Do not use metal tools to clean air

Summary of the content on the page No. 5

MPFHVLP SPRAY GUN Troubleshooting WARNING Follow Pressure Relief Procedure, page 3, before troubleshooting or servicing. Read warnings, page 2. Problem Cause Solution Normal pattern No action necessary Right Dirty or damaged air cap or fluid nozzle. Rotate air cap 180°. If pattern follows air cap, problem is in air cap. Clean and inspect. If pattern is not corrected, replace air cap. If pattern does not follow the air cap, the problem is with the fluid nozzle. Clean and inspect the nozzle. If

Summary of the content on the page No. 6

MPFHVLP SPRAY GUN Parts 8* 13 12a 1 6 12b 7 9 5* 11a 2b* 2c 2a 2 11b 11 2d* 11c* 2e* 4* 4* 3 11d* 2f* Ref. Ref. No. Part No. Description Qty. No. Part No. Description Qty. 12a 34811  Fluid Nozzle 1 1 34802 Gun Body 1 12b 29040  Fluid Needle 1 2 34825 Air Valve Assembly 1 13 34808 Air Cap 1 Includes items 2a-2f 2a 34819  Housing 1 * Parts included in Repair Kit 34835. 2b* 29049  Air Valve Stem 1 2c 29053  Lock Nut 1 2d* 29050  Ball 2e* 29036  Needle Spring 1 2f* 34823  Retainer 1 3 290