Summary of the content on the page No. 1
Owner's Manual
®
POLY "10" ATV CART
Model No. 486.24339
• Safety
CAUTION:
• Assembly
Before using this product, read
• Operation
this manual and follow all
• Maintenance
Safety Rules and
Operating Instructions.
• Parts
IMPORTANT - READ THIS FIRST!!!
For Missing Parts or Assembly Questions
Please Call 217-728-8388
Mon.-Fri. 7 am - 5 pm CST.
FAX 217-728-2032 or e-mail info@agri-fab.com
Missing parts will be sent UPS in 24 hours directly to your home.
Sears, Roebuck and Co., Hoffman Estates, IL 601
Summary of the content on the page No. 2
TABLE OF CONTENTS SAFETY RULES ........................................................2 STORAGE ..................................................................7 FULL SIZE HARDWARE CHART .............................3 REPAIR PARTS ILLUSTRATION ............................8 CARTON CONTENTS ...............................................4 REPAIR PARTS LIST ................................................9 ASSEMBLY ................................................................4 SLOPE GUIDE ..
Summary of the content on the page No. 3
HARDWARE PACKAGE CONTENTS HARDWARE SHOWN FULL SIZE F C B D A E G J H I N K M Not Shown Full Size O P R L Q REF. QTY. DESCRIPTION REF. QTY. DESCRIPTION A 4 Hex Bolt, 1/4" x 3/4" J 2 Cotter Pin, 1/8" x 1-1/2" B 4 Hex Bolt, 1/4" x 1-3/4" K 2 Lock Washer, 3/8" C 1 Hex Bolt, 5/16" x 3-3/4" L 4 Flat Washer, 1/4" D 2 Hex Bolt, 3/8" x 1-1/4" M 4 Flat Washer, 1" E 8 Truss Head Bolt, 5/16" x 3/4" N 1 Extension Spring F 8 Hex Nut, 1/4" O 1 Spring Puller G 1 Hex Lock Nut, 5/16" P 1 Hitch Pin H 10 Hex Nut, 5
Summary of the content on the page No. 4
ASSEMBLY CARTON CONTENTS 1. Poly Tray 5. Axle 8. Latch Lock Lever 2. Wheel Support 6. Wheels (2) 9. Hitch Bracket 3. Latch Stand Plate 7. Draw Bar Tongue 4. Latch Stand Bracket 3 1 2 4 8 9 5 6 7 TOOLS REQUIRED FOR ASSEMBLY (1) Screwdriver 5/16" HEX (1) Pliers NUTS (2) 7/16" Wrenches (2) 1/2" Wrench (2) 9/16" Wrenches • Remove the hardware pack and all loose parts from the carton. Be sure the carton is empty before LATCH discarding. 5/16" HEX LOCK LOCK NUT LEVER • Lay out and identify all the pa
Summary of the content on the page No. 5
• Attach the short end of the spring to the hole in the • Assemble the axle and drawbar tongue to the latch lock lever. Use the spring puller to attach the wheel support, with the open side of tongue facing long end of the spring to the square hole in the away from the wheel support. Fasten the axle to tongue. The hooked end of the puller should face the wheel support using four 1/4" x 1-3/4" hex bolts away from the tongue as shown in figure 2. and 1/4" hex nuts. Tighten. See figure 4. 1/4" x 1-
Summary of the content on the page No. 6
• Assemble the latch stand plate and the latch stand bracket to the bottom of the poly tray using four 1/4" x 3/4" hex bolts, 1/4" flat washers and 1/4" hex nuts. Tighten. See figure 6. 1/4" x 3/4" HEX BOLT 1/4" FLAT WASHER LATCH STAND PLATE LATCH STAND BRACKET 1/4" HEX NUT FIGURE 6 • Place the poly tray down onto the wheel support, positioning it so that the latch stand bracket snaps under the latch lock lever. Fasten the tray to the wheel support using eight 5/16" x 3/4" truss head bolts and 5
Summary of the content on the page No. 7
OPERATION KNOW YOUR CART Read this owner's manual and safety rules before • Use the slope guide provided on page 11 of this operating your cart. manual to determine whether slope angle is too Compare the illustration below with your cart to familiarize steep for safe operation. yourself with the various controls and their locations. CAUTION: Vehicle braking and stability may be affected with the addition of an accessory or an attachment. Be aware of changing conditions on slopes. • For best hand
Summary of the content on the page No. 8
PARTS REPAIR PARTS FOR MODEL 486.24339 23 20 16 1 5 21 6 7 21 3 8 13 12 25 12 22 22 22 11 17 2 B 14 2 10 4 B 9 19 24 18 15 27 26 8
Summary of the content on the page No. 9
REPAIR PARTS FOR MODEL 486.24339 REF. PART QTY. DESCRIPTION NO. NO. 1 47019 1 Poly Tray 2 24528 1 Axle, 1" 3 47049 2 Wheel 4 24758 1 Draw Bar Tongue 5 24386 1 Latch Stand Plate 6 24497 1 Latch Stand Bracket 7 24527 1 Wheel Support 8 24498 1 Latch Lock Lever 9 47407 1 Hex Bolt, 5/16-18 x 3-3/4" 10 23475 1 Hitch Bracket 11 43093 2 Cotter Pin, 1/8" x 1-1/2" 12 43601 4 Washer, Flat 1.59" O.D. x 1" I.D. 13 47453 2 Spacer Tube, 3-1/8" Lg. 14 43064 1 Hex Lock Nut, 5/16-18* 15 43015 2 Hex Nut, 3/8-16*
Summary of the content on the page No. 10
NOTES 10
Summary of the content on the page No. 11
SLOPE GUIDE (Keep this sheet in a safe place for future reference.) Use this guide to determine if a slope is safe for the operation of your tractor and cart. Refer also to the instructions in your vehicle owners manual. 11 CAUTION: DO NOT OPERATE YOUR TRACTOR AND CART ON A SLOPE IN EXCESS OF 10 DEGREES. BE SURE OF YOUR TRACTOR'S TOWING AND BRAKING CAPABILITIES BEFORE OPERATING ON A SLOPE. AVOID ANY SUDDEN TURNS OR MANEUVERS WHILE ON A SLOPE.
Summary of the content on the page No. 12
Get it fixed, at your home or ours! For repair of major brand appliances in your own home… no matter who made it, no matter who sold it! SM 1-800-4-MY-HOME Anytime, day or night (1-800-469-4663) www.sears.com To bring in products such as vacuums, lawn equipment and electronics for repair, call for the location of your nearest Sears Parts & Repair Center. 1-800-488-1222 Anytime, day or night www.sears.com For the replacement parts, accessories and owner’s manuals SM that you need to do-it-yourse
