Summary of the content on the page No. 1
SMG-301
Please read before using this unit.
Compact Disc + Graphic
Karaoke Center
Summary of the content on the page No. 2
WARNINGS This CD player is made and tested to meet WARNING: TO REDUCE THE RISK OF exacting safety standards. It meets FCC FIRE OR SHOCK HAZARD, DO NOT EXPOSE requirements and complies with safety THIS PRODUCT TO RAIN OR MOISTURE. performance standards of the U.S. Department of Health and Human Services. Warnings: CAUTION ! This CD player employs a laser light beam. RISK OF ELECTRIC SHOCK Only a qualified service person should DO NOT OPEN remove the cover or attempt to service this CAUTI
Summary of the content on the page No. 3
IMPORTANT SAFETY INSTRUCTIONS 1. Read Instructions - All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions - The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the product and in the operating instructions should be adhered to. 4. Follow instructions - All operating and use instructions should be followed. 5. Cleaning - Unplug this product from the wall outlet before cleaning
Summary of the content on the page No. 4
IMPORTANT SAFETY INSTRUCTIONS 15. Outdoor Antenna Grounding - If an outside antenna is connected to the receiver, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna-discharge unit, size of grounding conductors, location of antenn
Summary of the content on the page No. 5
INTRODUCTION Your SMG-301 Compact Disc + Graphics Karaoke Center will provide you with many years of fun and entertainment. It can let you be the “star” as you sing along with your favorite recordings and hear your voice with the music through the system’s speakers. This Karaoke Center is easy to use, yet full of features with a compact design. Just a few simple instructions and you will become an expert. Before you use your unit, please glance through this manual to familiarize yourself wit
Summary of the content on the page No. 6
CONTROL LOCATIONS 24 /ON OPEN/CLOSE 12 25 13 3 COMPACT DISC + GRAPHICS KARAOKE 26 3 CD ROTARY CHANGER SYSTEM SMG-301 3 CD 14 27 DISC 1 DISC 2 DISC 3 15 DISPLAY PLAY/PAUSE 28 16 DISC SKIP 3CD+GRAPHIC CHANGER DISPLAY STOP REMOTE CDG 29 SENSOR MIC VOLUME MASTER VOLUME 17 30 G R A P H I C S 18 31 REPEAT PROGRAM SKIP MEGA BASS FUNCTION SELECT 19 MIC 1 32 MIC 2 ECHO A.V.C. BALANCE PITCH 20 MIN MAX OFF L R LO HI 21 33 RECORD/PLAYBACK PLAYBACK 34 22 35 1 36 2 TAPE 1 TAPE 2 7 23
Summary of the content on the page No. 7
CONTROL LOCATIONS TV AUX IN AUX IN VIDEO L R IN L R 39 AUX VIDE O 38 OUT IN OUT 40 41 EXT. SPK. 42 43 AC~ E6 ENGLISH
Summary of the content on the page No. 8
DISPLAY VFD DISPLAY - ON THE UNIT 1 2 3 4 5 9 8 7 6 1. DISC Icon 6. REPEAT Icon 2. MEMORY Icon 7. MUTE Icon 3. RANDOM Icon 8. BASS Icon 4. REMAIN TRACK Icon 9. DISC PLAY Icon 5. TOTAL TRACK Icon REMOTE CONTROL OVERVIEW /ON MUTE 1 7 FUNCTION 2 PROGRAM DISPLAY 8 9 DISC RANDOM REPEAT SKIP 10 3 11 PLAY/ SKIP PAUSE STOP 4 12 / 13 1 2 3 4 5 5 6 7 8 SL9 EEP 0 +10 15 14 BASS VOLUME 6 RC-301 1. POWER Button 9. DISPLAY Button 2. FUNCTION Button 10. REPEAT Button 3. RANDOM Button 11. DISC SKIP Button
Summary of the content on the page No. 9
MAKING THE CONNECTIONS CAUTION: The supplied AC power cord, has a polarized plug that fits into the wall outlet only one way. If the plug does not fit properly, turn it over and try again. Do not force it. CONNECTION TO TV SET In order to display song lyrics from CDG also to appear on TV screen, you must connect the included video cable (yellow colored RCA single-plug) to the Video Output jack on the back of your SMG-301 unit. Then connect the other end of the video plug (yellow) to the Video
Summary of the content on the page No. 10
MAKING THE CONNECTIONS Please have the sample CDG demo disc provided with your Singing Machine playing in the Singing Machine when you are making these connections so you will see the lyrics on the screen as soon as you have the setup completed correctly. You must specify the source you wish to view when you are connecting the video out from the Singing Machine to either a TV or a VCR. Every TV and VCR manufacturer accomplishes the set-up a little differently. Even though every TV and VCR is
Summary of the content on the page No. 11
MAKING THE CONNECTIONS CONNECTING AN AUDIO COMPONENT FOR OUTPUT To connect an audio component (such as a power amplifier or a PA system amplifier) so you can hear the Singing Machine’s music & vocal through it, plug the audio component into the AUX OUT jacks. REAR VIEW OF SINGING MACHINE ANOTHER AUX AUDIO COMPONENT OUT IN R L L AUDIO IN R AUX OUTPUT AUX OUTPUT AUDIO INPUT AUDIO INPUT R L L R (White Jack) (Red Jack) (White Jack) (Red Jack) ATTENTION: ELECTRONIC MASTER VOLUME TOUCH CONTROL To
Summary of the content on the page No. 12
CD OR CD+G OPERATION D Warning - Tapping or dropping the microphone while it is on can permanently damage your microphone. Resist the urge to swing the microphone around by the cord! PREPARATION ! This unit is designed to play CD’s bearing the identification logo “ ”. If CD’s do not conform to the CD standard, they may not play properly. ! Fingerprints and dust should be carefully wiped off with a soft cloth. Wipe in a straight motion from the center of the disc to the outside edge. !
Summary of the content on the page No. 13
CD OR CD+G OPERATION SELECT DISC PLAY 7. Press one of the disc select button (DISC 1, DISC 2, DISC 3) to select the disc to be played. The symbol for PLAY “ ” and “1 DISC” appears. Play starts from the first track of the selected disc. The track number and elapsed playing time for the current track are displayed. After play stops at the end of the last track of the selected disc, the total number and total playing time of the selected disc and “TOTAL” will appear. Note: If the disc is lo
Summary of the content on the page No. 14
CD OR CD+G OPERATION TIME DISPLAY SELECTION Press the DISPLAY button repeatedly during normal play. The display changes in the following sequence: REMAIN (Remaining playing time for the current track) REMAIN TOTAL (Total remaining playing time for the disc) TOTAL (Elapsed playing time for the disc) Notes: ! During programmed play “REMAIN TOTAL” and “TOTAL” cannot be displayed. ! The displayed playing times may differ slightly from the times listed on the notes accompanying the disc. PROGRAMM
Summary of the content on the page No. 15
CD OR CD+G OPERATION 7. Select DISC 2 by pressing the DISC 2 button. TR MEMORY 3 2 1 8. Select track 9 by pressing the SKIP button. MEMORY 3 TR 2 1 9. Press the PROGRAM button. TR 3 MEMORY 2 1 10. Select DISC 3 by pressing the DISC 3 button. TR MEMORY 3 2 1 11. Select “AL” (all) by pressing the SKIP b utton. Until you reach the end of the tracks. MEMORY 3 TR 2 1 12. Press the PROGRAM button. / 13. Press the PLAY/PAUSE button to start play. MEMORY 3 TR 2 1 When all programme
Summary of the content on the page No. 16
CASSETTE OPERATION LOADING AND UNLOADING CASSETTES Follow these steps to load and unload cassettes: 1. Press the STOP/EJECT button (9). 2. Insert a cassette with desired side facing you, tape surface down. Avoid touching PLAYBA CK RECORD/PLAYBACK tape. 3. Close cassette holder/tape deck cover. TAPE 2 TAPE 1 To ensure firm locking of cassette REC PLAY REW FFW D STOP/EJ . PAUSE PLAY REW FFWD STOP/EJ. PAUSE holder/tape covers, please press the cassette door(s) at the center point (or the maxim
Summary of the content on the page No. 17
CASSETTE OPERATION CONSECUTIVE PLAY 2. Follow instructions for MICROPHONES/ 1. Turn on POWER (1). ECHO. When either or both microphones are plugged into the Microphone Jacks 2. Press FUNCTION SELECT button to (3), their output is mixed with the playback select the TAPE function, then load from cassette tapes. Adjust MIC VOLUME cassettes into both decks (5). (2) for the best balance between playback and microphone levels. 3. Depress PLAY button of Deck 2, which will Adjust ECHO (4) to add d
Summary of the content on the page No. 18
CASSETTE OPERATION RECORDING - CD or CDG Disc(s) PUBLIC ADDRESS - USING THE (Audio only, Video is not possible) SMG-301 AS A SYSTEM 1. Load a blank cassette in Tape Deck 1. 1. Connect the supplied Microphone to either one of the MIC input Jacks 2. Load a Singing Machine or any other prerecorded CD/CDG disc into the CD 2. Press the POWER button to turn the unit compartment drawer. on. 3. Press FUNCTION SELECT button to 3. Switch the ON/OFF switch located on the select the CD function. Press
Summary of the content on the page No. 19
CARE AND MAINTENANCE POWER SWITCH NOTE After using the SMG-301, turn off the power D Screwdrivers and other metal objects by pressing the POWER button. should never be allowed to come in contact with tape heads. These will CLEANING THE UNIT scratch the sensitive surface causing To clean the exterior of the unit, simply wipe damage to your tapes. with a soft clean cloth moistened with plain D Magnets or magnetized objects lukewarm water. should not be placed near tape heads. CLEANING TAPE H
Summary of the content on the page No. 20
TROUBLE SHOOTING GUIDE If you have followed the instructions and are having difficulty operating the unit, locate the PROBLEM in the left column below. Check the corresponding POSSIBLE CAUSE column to locate and remedy the problem. PROBLEM POSSIBLE CAUSE SOLUTION No power when No power plug connection at Insert the power plug into the AC POWER is on. the AC outlet. outlet. No power when plugged The AC outlet may not have Check the outlet with a working in. power. lamp or other electrical app
