Summary of the content on the page No. 1
SANTO 3778-8 KA
Upright Refrigerator
Operating Instructions
818 22 49-00/6
Summary of the content on the page No. 2
Dear customer, Before placing your new refrigerator into operation please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance. Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance. Notes which are important for your safety or for the proper function- 1 ing of the appliance are stressed with a warning triangle and/or with signal words (Warnin
Summary of the content on the page No. 3
Contents Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Environmental Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Old Appliances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Appliance Transport . . . . . . . . . . . . .
Summary of the content on the page No. 4
Contents Opening the Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Proper Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Hints and Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Normal Operating Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Food Storage . . . . . . . . . . . . .
Summary of the content on the page No. 5
1 Important Safety Instructions These warnings are provided in the interests of your safety. Ensure that you understand them all before installing or using this appliance. Your safety is of paramount importance. If you are unsure about any of the meanings of these warnings contact the Customer Care Department. Prior to Installation • Check the refrigerator for transport damage. Under no circumstances should a damaged appliance be installed! In the event of damage, please contact your retai
Summary of the content on the page No. 6
Important Safety Instructions Child Safety Do not allow children to tamper with the controls or play with the product. Keep packaging material away from children! (There is a risk of suffocation!) During Use This appliance is designed for domestic use only, specifically for the storage of edible foodstuffs only. It is not intended for commercial or industrial use. Containers with flammable gases or liquids can leak at low temperatures. Do not store any containers with flammable ma
Summary of the content on the page No. 7
Environmental Information Packaging All transit packaging materials are environmentally compatible and can be reused. Wood is un-treated. The plastics can be recycled and are identified as follows: >PE< for polyethylene, e.g. the outer covering and the bags in the interior. >PS< for polystyrene foam, e.g. the pads, which are pure hydrocarbon compounds and can be recycled. The carton parts are made from recycled paper. Please dispose of the packaging with due care for the environment. Old A
Summary of the content on the page No. 8
Before Use Packaging 0 1. Remove all adhesive tape and packaging from the interior of the appli- ance. Any remnants of adhesive can be removed with white spirit. 3 2. Remove the transport protection pieces and pull off the adhesive tape. 3. Wash the inside of the appliance with lukewarm water with a little bicarbonate of soda added (5 ml to 0.5 litre of water). Do not use soap or detergent as the smell may linger. Dry the appliance thoroughly. Remove the transport fittings from the storag
Summary of the content on the page No. 9
Fitting the Door Handles Caution! Do not use excessive force and overtighten the screws (max. 2 1 Nm) as you may damage the door handles. 0 1. Screw the top handle bracket to the handle rod (1). Fit the bottom han- dle bracket on the lower left-hand side of the door (2). 2. Fit the top handle bracket on the top left-hand side of the door (3) and screw the handle rod to the bottom handle bracket (4). Installation Installation Location The appliance should be installed in a well ventilated
Summary of the content on the page No. 10
Installation The following table shows which ambient temperature is correct for each climate classification: Climate classification for an ambient temperature of SN +10 to +32 °C N +16 to +32 °C ST +18 to +38 °C T +18 to +43 °C The Refrigerator needs Ventilation Air is fed under the door through the vent slots in the base and is exhausted upwards along the back wall. To ensure proper air circulation never cover or alter the vent openings. Important! If the appliance is installed under a
Summary of the content on the page No. 11
Installation Electrical Connection Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. WARNING – THIS APPLIANCE MUST BE EARTHED 1 The manufacturer declines any liability should these safety measures not be observed. Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance rating plate. The rating plate is inside, on the left. The appliance is supplied with a 13 amp pl
Summary of the content on the page No. 12
Reversing the Door The door hinges can be changed from right (as supplied) to left if required to suit the location where the appliance is installed. Warning! Unplug from the mains before reversing the door. 1 0 1. Open the door and remove the plinth cover to the front. Move the door hinge bracket cover on the plinth cover from the left to the right. Close the door. 2. With the door closed, remove the cross-head screws from the lower door hinge bracket and remove the door hinge brack
Summary of the content on the page No. 13
Reversing the Door 4. Remove the door fitting on the lower right (1) and reposition the door hinge bracket cover from the lower left to the right of the door (2), place the door fitting supplied in the lower left of the door (3). Carefully remove the door to the front and place on one side. 5. Move the upper hinge bracket pivot to the left. 6. Carefully slide the door onto the top hinge bracket pivot and close. 7. Place the lower door hinge bracket with the hinge bracket pivot in th
Summary of the content on the page No. 14
Reversing the Door 9. Unscrew the top handle bracket from the handle rod (1). Unscrew the bottom handle bracket from the door (2). 10. Unscrew the top handle bracket from the door (3) and screw onto the bottom right-hand side of the door (4). Caution! Do not use excessive 1 force and overtighten the screws (max. 2 Nm) as you may damage the door handles. 11. Turn the handle bracket with the handle rod 180° and screw them to the door (5) and the fitted han- dle bracket (6). Caution! D
Summary of the content on the page No. 15
Description of the Appliance View of the appliance á Control panel à Butter and cheese compartment with lid â Door storage compartments ä Variable storage box ã Bottle compartment å Salad bin ç Shelves é Bottle rack è Rating plate 818 22 49-00/6 15
Summary of the content on the page No. 16
Description of the Appliance Control Panel 1 ON/OFF button 2 Temperature display 3 Buttons for adjusting the temperature 4 FAST CHILL button and FAST CHILL indicator light (yellow) FAST CHILL for intensive cooling in the refrigerator 5 WARNING OFF button Buttons for Adjusting the Temperature The temperature is adjusted using the „+“ (WARMER) and „-“ (COLDER) buttons. These buttons are connected to the temperature display. The temperature display is switched over from the display
Summary of the content on the page No. 17
Temperature Display The temperature display can indicate several pieces of information. During normal operation, the temperature currently present in the refrigerator (ACTUAL temperature) is displayed. When the temperature is being adjusted a flashing display indicates the fridge compartment temperature currently set (DESIRED temper- ature). FAST CHILL button The FAST CHILL function is suited for quick cooling of large quantities of goods in the refrigerator, e.g. drinks and salads for
Summary of the content on the page No. 18
Initial Start-Up 0 1. Insert plug into mains socket. 2. Press ON/OFF button. 3. Set the refrigerator to the desired temperature (see section: "Tempera- ture Adjustment"). Goods to be refrigerated can be loaded immediately after switching on, 3 because the storage temperature in the refrigerator is quickly reached. Temperature Adjustment With the buttons for temperature adjustment the desired temperatures in the refrigerator can be adjusted. 0 1. Press either the „+“ (WARMER) or „-“ (COLDER) b
Summary of the content on the page No. 19
"Open Door" Warning If the fridge door is left open for longer than 5 minutes the red warn- ing display will flash and an acoustic warning tone will sound. If you need more time to load or rearrange refrigerated foods, you can switch off the warning tone by pressing the WARNING OFF button. The red warning display will go off when the door is closed. Temperature warning The red warning light flashes and a warning tone sounds, as soon as the temperature in the refrigerator is warmer than 12 °C
Summary of the content on the page No. 20
Interior Fittings Storage Shelves The shelf in the lowest runners over the fruit and vegetable drawer must always remain in this position, so that fruit and vegetables stay fresher for longer. The remaining storage shelves can be adjusted to various heights: 0 1. Pull the storage shelf forward until it can be tipped up or down and removed. 2. To insert at a different height use the same procedure in reverse. Salad Bin The salad bin can be divided into sections by inserting the dividers.
