Summary of the content on the page No. 1
SMX.311
ProfeSSional Table ToP CD MiXer
User Manual
Summary of the content on the page No. 2
important Safety instructions 1. read instructions – All the safety and operating instructions should be read before this product is operated. 2. retain instructions – The safety and operating instructions should be retained for future reference. 3. Heed Warnings – All warnings on the appliance and in the operating instructions should be adhered to. 4. follow instructions – All operating and use instructions should be followed. 5. Water and Moisture – The appliance should not be u
Summary of the content on the page No. 3
Contents 1. introduction ................................................................................................................................................................ 1 1.1. Welcome to the SMX.311! ............................................................................................................................................. 1 1.2. Overview .........................................................................................................................
Summary of the content on the page No. 4
introduction 1. introduction 1.1 Welcome to the SMX.311! Thank you for purchasing the SMX.311. Before starting, please check that you have received the following items: • SMX.311 unit • AC Adaptor • User Manual Now that you have checked that everything was included in the box, let’s talk about the SMX.311. 1.2 overview The SMX.311 is a compact 3-channel mixer that offers high-end performance at a low cost. With features like balanced outputs, booth out, replaceable crossfader, and micr
Summary of the content on the page No. 5
Quick Setup Diagram 2. Quick Setup Diagram Review this setup diagram. (Figure 2.1) Make sure all faders are at "zero" and all devices are OFF. First, connect all input sources and processors. Next, connect your microphone and monitor headphones. Finally, connect the stereo outputs to the power amplifier(s) and/or audio receivers such as tape decks. Plug your mixer into AC power. Now you are ready to switch everything ON. important: Always switch ON your audio input sources such as turntables or C
Summary of the content on the page No. 6
SMX.311 Description (Top Panel) 3. SMX.311 Description 3.1 Top Panel (Figure 3.1) Figure 3.1 3
Summary of the content on the page No. 7
SMX.311 Description (Top Panel) 1. Mic on/off/TalK Switch: Turns the Mic ON or OFF. When the switch is in the TALK position, the mixer’s sound level will decrease around 14 dB (except the Mic channel) so that the microphone is more clearly heard over the music. 2. Mic level: Adjusts the microphone input level. 3. Cue level: Adjusts the headphone volume output level. 4. Cue Mix: Allows you to preview channel audio to your headphones. Listen here before bringing up channel fader
Summary of the content on the page No. 8
SMX.311 Description (rear Panel) 3.2 rear Panel (Figure 3.2) Figure 3.2 17. Power Switch: Turns the mixer ON or OFF. 18. Power Connector: While the power is switched OFF, plug the power supply into the mixer first, and then plug it into the outlet. 19. booth output: Using a RCA cable, connect from the SMX.311 booth output to the DJ booth monitor system inputs. 20. balanced Master output: TRS balanced (1/4”) connectors are typically used to connect to a P.A. mixer or an amplifier for live
Summary of the content on the page No. 9
SMX.311 Description (front Panel) 3.3 front Panel (Figure 3.3) Figure 3.3 25. Microphone input (Mic): Connect a standard unbalanced (1/4") microphone. 26. Headphone output: Standard 1/4” headphone output connector. 6
Summary of the content on the page No. 10
Troubleshooting 4. Troubleshooting Problem / Symptom Possible Cause / Solution no Sound. Is the power ON? Based on your connections, check that you have properly set the Channel Input (Phone-Line). Make sure that the Input Gain, Channel Fader, and Master output are turned up. Make sure the channels are properly assigned to the Crossfader. no Sound-Headphones. Check the Cue Level, Cue Mix, and Cue button settings. Mixer sounds noisy. If a microphone is not being used, move the Mic switch to the
Summary of the content on the page No. 11
registration Card Thank you for choosing Stanton! Your satisfaction is extremely important to us. We proudly stand behind the quality of our work and appreciate that you put your trust in us. Registering your product will help us guarantee that you are kept up to date on our latest advances. Warranty Service in the United States: Please contact Stanton Tech Support BEFORE sending your product. In some cases, our Tech Support team can resolve your problem immediately, avoiding down time due to
Summary of the content on the page No. 12
Stanton Warranty Stanton Warranty Through Stanton's authorized dealers around the World, Stanton, or one of Stanton's authorized distributors outside the U.S., will, without charge, repair or replace, at the sole discretion of the entity responsible for making the repair or providing the replacement, any Stanton merchandise proved defective in material or workmanship for a period of one (1) year following the date of original purchase. Exceptions to this warranty are as noted below: The warranty
Summary of the content on the page No. 13
Specifications Specifications input / output impedance & sensitivity: Line 47k ohm /-14 dBV +/-0.1 dB (200mV) Phono 47k ohm /-50 dBV +/-0.1 dB (3.16mV) Mic 10k ohm /-54 dBV +/-0.1 dB (2mV) Master 1k ohm /0 dB (1V) +/-2 dB Master Bal (Load=600 ohm) 600 ohm /+4 dBm (1.23V) +/-2 dB Phones (Load=32 ohm) 33 ohm / 0 dBV (1V) +/- 2 dB Channel balance: Within 3 dB frequency response: (Master output, eQ flat) Line 20-20 kHz +/- 2 dB Phono 20-20 kHz +2/-3 dB (RIAA) S/n ratio: (Maximum gain, eQ flat, W/20 kH
Summary of the content on the page No. 14
notes ........................................................................................................................... ........................................................................................................................... ........................................................................................................................... ..........................................................................................................................
Summary of the content on the page No. 15
notes ........................................................................................................................... ........................................................................................................................... ........................................................................................................................... ..........................................................................................................................
Summary of the content on the page No. 16
Copyright © 2009 Stanton Magnetics, Inc. SMX.311 and STR8.150, are trademarks or registered trademarks of the Stanton Group. All other trademarks are property of their respective owners, who are in no way affiliated with Stanton DJ or SC System products. All information included in the User Manual is subject to change without notice. +1 (954) 949-9600 LITS00058 11/17/2009
