Summary of the content on the page No. 1
PLCD29
OWNER’S MANUAL
Mobile Audio System
• PLL Synthesizer Stereo Radio
• Digital Compact Disc Player
• Automatically Memory Storing
• Full Detachable Panel
• Auxiliary Input Function
Summary of the content on the page No. 2
CONTENTS Installation ............................................................................................... 3 DIN Front-Mount (Method A) ........................................................................... 3 Installing the unit ........................................................................................ 3 Removing the unit ...................................................................................... 4 DIN Rear-Mount (Method B) .....................
Summary of the content on the page No. 3
INSTALLATION Notes: DIN FRONT-MOUNT (Method A) • Choose the mounting location where Installing the unit the unit will not interfere with the normal driving function of the driver. 1 2 • Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up 53 properly and the unit and the system 3 work properly. • Use only the parts included with the unit to ensure proper installation. (Fig. 1) The use of unauthorized parts can cause malfunctions. 1. Dash
Summary of the content on the page No. 4
INSTALLATION Removing the unit Fastening the unit to the factory radio mounting bracket. 1 1. Select a position where the screw holes of the bracket and the screw holes of the main unit become aligned (are fitted), and tighten the screws at 2 2 places on each side. 3 Use either truss screws (5 x 6mm) or flush surface screw (4 x 6mm), depending on the shape of the screw holes in the bracket. 2. Screw 3. Factory radio mounting bracket 4. Dashboard or Console 1. Frame 5. Hook (Remove this part
Summary of the content on the page No. 5
USING THE DETACHABLE FRONT PANEL To Detach the Front Panel To Reinstall the Front Panel 1. Press the release button (REL), then 1. Push the front panel into the main the right-hand side of the panel will body. A ‘click’ sound should be be ejected. heard. Release Button 2. Remove the front panel by pulling its 2. Note that if the front panel fails to lock right-hand side outward. in position properly, press control button may not function and LCD Front Panel display may be missing some segm
Summary of the content on the page No. 6
WIRING CONNECTION MAIN UNIT ANTENNA CONNECTOR FUSE IGNITION RED SWITCH (B+) (GREY) Rch RED RCA CABLE MEMORY YELLOW BACK-UP CHOKE Lch WHITE BLACK BOX GROUND (B–) BLUE POWER ANTENNA 2-SPEAKERS SYSTEM 4-SPEAKERS SYSTEM 4-SPEAKERS SYSTEM 2-SPEAKERS SYSTEM WHITE GREY WHITE GREY FRONT FRONT Lch SPK. Rch SPK. WHITE/BLACK GREY/BLACK Lch Rch SPK. SPK. GREEN VIOLET REAR REAR Lch SPK. Rch SPK. GREEN/BLACK GREEN/BLACK VIOLET/BLACK VIOLET/BLACK Note: 1. For 2-speakers system, green, violet, white/black and g
Summary of the content on the page No. 7
OPERATION 4 3 7 14 2 23 20 22 8 5 21 6 1 9 11 10 12 15 16 18 19 13 17 24 25 26 • LOUDNESS GENERAL OPERATION Press LOU button (6) to increase bass output and display will show “LOUD”. • ON/OFF Press the PWR button (1) to turn on. • SET THE CLOCK Press PWR again to turn it off. Press and hold the DSP button (7), the clock will show on the display, then • MUTE press the TRACK/TUNE button (16) Press the MUT button (3) to silence to change minutes or TRACK/TUNE the receiver. Press again to re
Summary of the content on the page No. 8
OPERATION Use VOLUME (10) and VOLUME RADIO OPERATION (11) buttons to adjust the selected mode. When mode has not been • SELECT BAND adjusted for several seconds, display Press BAND button (12) to change returns to normal radio or CD display. between three FM bands and two AM BA TR B F V- bands. Each band stores up to six (Bass) (Treble) (Balance) (Fader) (Volume) preset stations. FM1 FM2 FM3 AM1 AM2 • SELECT LISTENING MODE Press MOD button (13) to choose desired listening mode. • SELE
Summary of the content on the page No. 9
OPERATION Preset Scanning CD OPERATION Press AMS button (18) shortly to toggle preset scanning function. • DISC PLAY During the scanning, it will stop at Push a compact disc with the label every stored station for several side facing up into the disc slot (2). seconds and the frequency of station When there have correspondingly being scanned flashes on the display. showing on the display, press Press it again to stop scanning. button (19) to start playing with the first track of
Summary of the content on the page No. 10
SPECIFICATION GENERAL Power Supply Requirements : DC 12 Volts, Negative Ground Chassis Dimensions : 178 (W) x 155 (D) x 50 (H) Tone Controls - Bass (at 100 Hz) : + 10 dB / – 10 dB - Treble (at 10 KHz) : + 10 dB / – 10 dB Maximum Output Power : 4 x 40 Watts (max.) Current Drain : 5 Ampere (max.) CD PLAYER Signal to Noise Ratio : More than 60 dB Channel Separation : More than 60 dB Frequency Response : 20 Hz - 20 KHz RADIO FM Frequency Coverage : 87.5 to 107.9 MHz IF : 10.7 MHz Sensitivity (S/N =
Summary of the content on the page No. 11
TROUBLE SHOOTING Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer. Symptom Cause Solution No power. The car ignition switch is If the power supply is properly not on. connected to the car accessory circuits, but the engine is not moving, switch the ignition key to “ACC”. The fuse is blown. Replace the fuse. Disc cannot Presence of CD disc inside Remove the disc in the player, then be
Summary of the content on the page No. 12
www.pyleaudio.com 88-C1280-11
