Summary of the content on the page No. 1
English Deutsch Italiano
Español Français Nederlands
Multi-CD control High power CD player
with RDS tuner
Operation Manual
DEH-P4400R
DEH-P4400RB
Summary of the content on the page No. 2
Section Contents 00 Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to oper- ate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. • Responding to the TP alarm 16 Before You Start Using PTY functions 16 About this unit 4 • Using news program interruption 16 About this manual 4 • Receiving PTY alarm broadcasts 16 Precautions 4 PTY list 17 In case of tro
Summary of the content on the page No. 3
English Deutsch Italiano Español Français Nederlands Section Contents 00 Using CD TEXT functions 28 Other Functions • Displaying titles on CD TEXT discs 28 Using the AUX source 39 • Scrolling titles in the display 28 • Selecting AUX as the source 39 Using compression and bass emphasis 29 • Setting the AUX title 39 Using the telephone muting/attenuation Audio Adjustments and handsfree telephoning function 40 Introduction of audio adjustments 30 • Telephone muting/attenuation Setting the
Summary of the content on the page No. 4
Section Before You Start 01 • The Pioneer CarStereo-Pass is for use only in About this unit Germany. • Keep this manual handy as a reference for This product complies with the EMC operating procedures and precautions. Directives (89/336/EEC, 92/31/EEC) and • Always keep the volume low enough so you CE Marking Directive (93/68/EEC). can hear sounds outside of the car. • Protect this product from moisture. • If the battery is disconnected or discharged, The tuner frequencies on this unit are allo
Summary of the content on the page No. 5
English Deutsch Italiano Español Français Nederlands Section Before You Start 01 Removing the front panel 1 Press OPEN to open the front panel. 2 Grip the left side of the front panel and pull it gently outward. Take care not to grip it tightly or drop it. 3 Put the front panel into the protective case provided for safe keeping. Attaching the front panel Replace the front panel by holding it upright to this unit and clipping it securely into the mounting hooks. En 5
Summary of the content on the page No. 6
Section Before You Start 01 !2 q w e TA AUDIO r SELECT !1 t EQ SFEQ !0 o i u y 7 BAND/ESC button What’s What Press to select among three FM or MW/LW Head unit bands and cancel the control mode of func- tions. 1 DISPLAY button 8 1–6 (PRESET TUNING) buttons Press to select different displays. Press for preset tuning and disc number search when using a multi-CD player. 2 FUNCTION button Press to select functions. 9 SOURCE button This unit is switched on by selecting a 3 OPEN button source. Press t
Summary of the content on the page No. 7
English Deutsch Italiano Español Français Nederlands Section Before You Start 01 ~ 7 9 5 ! 2 4 Optional remote control Using the remote control with PGM button The steering remote control CD-SR80 is sold separately. Operation is the same as when The remote control CD-R600, which is sold sep- using the button on the head unit. See the arately, can also operate this unit. It has a PGM explanation of the head unit about the operation (program) button in which frequently used func- of each button wi
Summary of the content on the page No. 8
Section Power ON/OFF 02 • External unit refers to a Pioneer product (such Turning the unit on as one available in the future) that, although incompatible as a source, enables control of Press SOURCE to turn the unit on. basic functions by this unit. Only one external When you select a source the unit is turned on. unit can be controlled by this unit. • When this unit’s blue/white lead is connected to the car’s auto-antenna relay control termi- nal, the car’s antenna extends when this unit’s sour
Summary of the content on the page No. 9
English Deutsch Italiano Español Français Nederlands Section Tuner 03 3 Press BAND/ESC to select a band. Listening to the radio Press BAND/ESC until the desired band is dis- played, F1, F2, F3 for FM or MW/LW. 4 To perform manual tuning, press 2 or 3 with quick presses. The frequencies move up or down step by step. 3 14 2 5 To perform seek tuning, press and hold 2 These are the basic steps necessary to operate or 3 for about one second and release. the radio. More advanced tuner operation is The
Summary of the content on the page No. 10
Section Tuner 03 Press FUNCTION to display the function Introduction of advanced tuner names. operation Press FUNCTION repeatedly to switch between the following functions: BSM (best stations memory)—REG (regional)— LOCAL (local seek tuning)—TA (traffic announcement standby)—NEWS (news pro- gram interruption)—AF (alternative frequencies search) 1 2 • To return to the frequency display, press BAND/ESC. • If MW/LW band is selected, you can only 1 FUNCTION display select BSM or LOCAL. Shows the fun
Summary of the content on the page No. 11
English Deutsch Italiano Español Français Nederlands Section Tuner 03 Storing and recalling broadcast Tuning in strong signals frequencies Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for If you press any of the PRESET TUNING buttons good reception. you can easily store up to six broadcast frequen- cies for later recall with the touch of a button. 1 Press FUNCTION to select LOCAL. Press FUNCTION until LOCAL appears in the When you find a frequency
Summary of the content on the page No. 12
Section Tuner 03 Storing the strongest broadcast frequencies BSM (best stations memory) lets you automati- cally store the six strongest broadcast frequen- cies under PRESET TUNING buttons 1–6 and once stored there you can tune in to those fre- quencies with the touch of a button. 1 Press FUNCTION to select BSM. Press FUNCTION until BSM appears in the dis- play. 2 Press 5 to turn BSM on. BSM begins to flash. While BSM is flashing the six strongest broadcast frequencies will be stored under PRESE
Summary of the content on the page No. 13
English Deutsch Italiano Español Français Nederlands Section RDS 04 Press FUNCTION to display the function Introduction of RDS operation names. Press FUNCTION repeatedly to switch between 5 the following functions: BSM (best stations memory)—REG (regional)— LOCAL (local seek tuning)—TA (traffic announcement standby)—NEWS (news pro- gram interruption)—AF (alternative frequencies 2 134 search) • To return to the frequency display, press RDS (radio data system) is a system for provid- BAND/ESC. ing
Summary of the content on the page No. 14
Section RDS 04 Switching the RDS display Notes When you tune in a RDS station its program • Only RDS stations are tuned in during seek service name is displayed. If you want to know tuning or BSM when AF is on. the frequency you can. • When you recall a preset station, the tuner may update the preset station with a new Press DISPLAY. frequency from the station’s AF list. (This is Press DISPLAY repeatedly to switch between only available when using presets on the F1 or the following settings: F2
Summary of the content on the page No. 15
English Deutsch Italiano Español Français Nederlands Section RDS 04 Using auto PI seek for preset stations Receiving traffic announcements When present stations cannot be recalled, as TA (traffic announcement standby) lets you when travelling long distances, the unit can be receive traffic announcements automatically, set to perform PI seek during preset recall. no matter what source you are listening to. TA • The default setting for auto PI seek is off. See can be activated for both a TP statio
Summary of the content on the page No. 16
Section RDS 04 Using PTY functions Notes • You can also turn the TA function on or off by You can tune in a station by using PTY informa- pressing FUNCTION. tion. • The system switches back to the original source following traffic announcement recep- tion. Using news program interruption • TA can be activated from sources other than When a news program is broadcast from a PTY the tuner if the tuner was last set to the FM code news station the unit can switch from any band but not if it was last
Summary of the content on the page No. 17
English Deutsch Italiano Español Français Nederlands Section RDS 04 PTY list Specific Type of program NEWS News AFFAIRS Current affairs INFO General information and advice SPORT Sports WEATHER Weather reports/meteorological information FINANCE Stock market reports, commerce, trading, etc. POP MUS Popular music ROCK MUS Contemporary modern music EASY MUS Easy listening music OTH MUS Non categorized music JAZZ Jazz COUNTRY Country music NAT MUS National music OLDIES Oldies music, golden oldies F
Summary of the content on the page No. 18
Section Built-in CD Player 05 3 Close the front panel. Playing a CD • After a CD has been inserted, press SOURCE to select the built-in CD player. 1 2 These are the basic steps necessary to play a 4Use VOLUME to adjust the sound level. CD with your built-in CD player. More advanced Rotate to increase or decrease the volume. CD operation is explained starting on page 19. 5 To perform fast forward or reverse, press 1 TRACK NUMBER indicator and hold 2 or 3. Shows the track currently playing. 6 To s
Summary of the content on the page No. 19
English Deutsch Italiano Español Français Nederlands Section Built-in CD Player 05 REPEAT :OFF appears in the display. The track Introduction of advanced built-in presently playing will continue to play and then CD player operation play the next track. Note • If you perform track search or fast forward/reverse, repeat play is automatically cancelled. 1 1 FUNCTION display Shows the function status. Playing tracks in a random order Press FUNCTION to display the function Random play lets you play
Summary of the content on the page No. 20
Section Built-in CD player 05 1 Press FUNCTION to select PAUSE. Scanning tracks of a CD Press FUNCTION until PAUSE appears in the Scan play lets you hear the first 10 seconds of display. each track on the CD. 2 Press 5 to turn pause on. 1 Press FUNCTION to select T-SCAN. PAUSE :ON appears in the display. Play of the Press FUNCTION until T-SCAN appears in the current track pauses. display. 3 Press ∞ to turn pause off. 2 Press 5 to turn scan play on. PAUSE :OFF appears in the display. Play will T-
