Summary of the content on the page No. 1
ULIN_016357_30087.fm Page 1 Tuesday, March 14, 2006 2:36 PM
Use and Care Guide
Refrigerator Models:
1115R, 1175R, 29R
Beverage Center Model:
1175BEV
29R 1175BEV
1115R 1175R
Summary of the content on the page No. 2
ULIN_016357_30087.fm Page 2 Tuesday, March 14, 2006 2:36 PM 1 Introduction Congratulations on your purchase of a U-Line refrigeration product. A pioneer in the field for more than 40 years, U-Line Corporation is the world’s number one manufacturer of built-in, under-counter, specialty refrigeration and ice making products. U-Line dedicates 100% of its research and development to these products. The result: U-Line technology consistently leads the market with innovation, design, depth of pr
Summary of the content on the page No. 3
ULIN_016357_30087.fm Page 3 Tuesday, March 14, 2006 2:36 PM 2 Table of Contents Introduction ...............................................................................................................................2 Warranty Registration .......................................................................................................2 Please Record Your Model Information ...........................................................................2 Table of Contents ................
Summary of the content on the page No. 4
ULIN_016357_30087.fm Page 4 Tuesday, March 14, 2006 2:36 PM This page intentionally left blank 4 1115R, 1175R, 29R, 1175BEV
Summary of the content on the page No. 5
ULIN_016357_30087.fm Page 5 Tuesday, March 14, 2006 2:36 PM WARNING 3 Safety Precautions SHOCK HAZARD - Electrical Grounding Required. � Never attempt to repair or perform IM IMPO POR RT TA AN NT T maintenance on the unit until the electricity PLEASE READ all instructions completely before has been disconnected. attempting to install, operate, or service your unit. � Never remove the round grounding prong from • Proper installation procedures must be followed the plug and never use a two
Summary of the content on the page No. 6
ULIN_016357_30087.fm Page 6 Tuesday, March 14, 2006 2:36 PM Origins Beverage Center 4Product Features Model 1175BEV Origins Refrigerator The Model 1175BEV Beverage Center will accommodate up to 16 standard 750 mL bottles of your favorite wines Models 1115R, 1175R, 29R on its two upper, 3/4 extendable, sliding wine racks. The � Models 1115R and 1175R feature an electronic control Beverage Center also provides generous storage for non- panel with digital display that allows you to display t
Summary of the content on the page No. 7
ULIN_016357_30087.fm Page 7 Tuesday, March 14, 2006 2:36 PM Interior Lighting 5 Operation Model 1115R, 1175R and 1175BEV The interior of the cabinet can be illuminated whenever the door is opened or remained darkened for a 36-hour period (blackout/Sabbath mode [not Star K certified]). 1 2 3 4 5 ULIN_0126_A Figure 2 IM IMPO POR RT TA AN NT T Proper air flow (Figure 2) is required for your unit to operate at its highest efficiently. A grille, located in ULIN_0074_A the base of the unit, mus
Summary of the content on the page No. 8
ULIN_016357_30087.fm Page 8 Tuesday, March 14, 2006 2:36 PM Checking Product Temperature Electronic Control Panel 1 2 3 4 5 ULIN_0074_A Figure 5 Models 1115R, 1175R and 1175BEV The electronic control with digital display (Figure 5) is configured to show a single temperature continuously. This set-point temperature is a base number used by the controller to maintain the temperature zone in your unit. ULIN_0093_A The factory default set-point is 38°F. This set-point Figure 6 temperature is
Summary of the content on the page No. 9
ULIN_016357_30087.fm Page 9 Tuesday, March 14, 2006 2:36 PM Adjusting Temperature Manual Temperature Control Model 29R IM IMPO POR RT TA AN NT T Adjust the set point temperature in single 1 increments, and wait 24 hours for the temperature to stabilize before rechecking. 1 2 3 4 5 ULIN_0014_A Figure 8 Adjust the temperature by turning the numbered dial ULIN_0074_A (Figure 8, 1) in small increments. Turn knob clockwise to make unit colder and counterclockwise to make unit Figure 7 warmer.
Summary of the content on the page No. 10
ULIN_016357_30087.fm Page 10 Tuesday, March 14, 2006 2:36 PM Wine Stocking Recommendations Storage, Vacation, Moving If the unit will not be used for an extended period, or Model 1175BEV otherwise stored, follow these steps completely: Specially designed wine racks allow for the proper horizontal storage of wine. The bottles are properly WARNING positioned so the wine remains in contact with the cork to assure that the cork does not become dry. Electrical Shock Hazard. Disconnect power be
Summary of the content on the page No. 11
ULIN_016357_30087.fm Page 11 Tuesday, March 14, 2006 2:36 PM Suggestions for Matching Food and Wine 6 Wine Guide Although there are no hard fast rules for matching wine to food, observe some guidelines. Delicate dishes should Wine Recommendations be accompanied by lighter more delicate wines. Full- flavored foods should be matched with fuller-bodied To most, wine is a delicious mystery. We purchase it, wines. uncork it, and savor its taste and beauty. But there is so much more to true wi
Summary of the content on the page No. 12
ULIN_016357_30087.fm Page 12 Tuesday, March 14, 2006 2:36 PM Guide to Common Styles of Wine Red Wines Full-Bodied Dry California Zinfandel, Cabernet French Rhone, Chateauneuf-du-Pape Barbaresco, Barolo Italian Medium-Bodied Dry California Pinot Noir French Bordeaux, Burgundy Light-Bodied Dry French Beaujolais Italian Chianti, Bardolino White Wines Full-Bodied Dry California Chardonnay French Montrachet, Meursault Puligny-Montrachet Medium-Bodied Dry California Sauvignon-Blanc French Pouilly-F
Summary of the content on the page No. 13
ULIN_016357_30087.fm Page 13 Tuesday, March 14, 2006 2:36 PM � Do not use any solvent-based or abrasive 7 Cleaning and Maintenance cleaners. These types of cleaners may transmit taste to the interior products and damage or discolor the interior. General Cleaning Maintenance Exterior Cleaning (As Required) Proper maintenance of your U-Line product will ensure Vinyl Clad (Black or White) Models: efficiency, top performance and long life. The � Surfaces may be cleaned with a mild detergent
Summary of the content on the page No. 14
ULIN_016357_30087.fm Page 14 Tuesday, March 14, 2006 2:36 PM To defrost: 4. Remove grille and grille cap from unit. 1. Turn unit off. 1 2. Remove all products from the interior and prop the door in an open position (2 in. (5 cm) minimum). 3. Allow the frost to completely melt naturally. Clean the interior and all removed components using a mild non- abrasive detergent and warm water solution applied ULIN_0153_A with a soft sponge or non-abrasive cloth. NOTE: DO NOT use any solvent-based o
Summary of the content on the page No. 15
ULIN_016357_30087.fm Page 15 Tuesday, March 14, 2006 2:36 PM 1 1 2 ULIN_0156_A Figure 15 ULIN_0159_A 3 4. Clean the condenser coil (Figure 15, 1) using a using a soft brush with a “combing” action or vacuum cleaner. Figure 18 Do not touch the condenser coil. 5. Place the hook-hinge (Figure 18, 1) located on the rear bottom side of the grille onto the front lip (Figure 18, 2) of the unit base. Swing the grille up into position, and align the screw holes on the grille to the grille screw
Summary of the content on the page No. 16
ULIN_016357_30087.fm Page 16 Tuesday, March 14, 2006 2:36 PM Door Reversal Black or white unit doors may be left- or right-hand opening. Depending upon the location of the unit, it may be desirable to change the side on which the door is mounted. Black Model 1115R 1 To reverse the door, perform the following: ULIN_0042_A 1. Remove the grille and grille cap (two screws). Figure 20 2. If the unit is not level, adjust the feet on the corners of the unit as necessary (Figure 20). 3. Check the
Summary of the content on the page No. 17
ULIN_016357_30087.fm Page 17 Tuesday, March 14, 2006 2:36 PM 7. Relocate plastic spacer/bushing (Figure 26) on bottom of door to opposite side, and place door on bottom hinge pin. Clean out bushing hole in door bottom with a screwdriver if necessary. Hinge Plastic Plastic Plug Hole Plug Hole Screw Right Side Left Side Door Swing Door Swing Right Side Invert Invert ULIN_0122 _A Hinge Screw Hinge ULIN_0142_A Figure 24 Figure 27 5. Remove screws on opposite side of cabinet (Figure 24). 8.
Summary of the content on the page No. 18
ULIN_016357_30087.fm Page 18 Tuesday, March 14, 2006 2:36 PM 12. Fasten upper hinge to unit (three screws) (Figure 29). Hinge Partially tighten screws. 13. Adjust door to assure proper seal. Tighten upper and Plastic Plastic Plug Hole Plug Hole lower hinge screws securely. 14. Replace three plastic plugs removed in Step 10 into holes on top of unit. Replace screws in holes in bottom of unit on opposite side. Screw Right Side Left Side 15. Replace the grille and grille cap. Be sure to plac
Summary of the content on the page No. 19
ULIN_016357_30087.fm Page 19 Tuesday, March 14, 2006 2:36 PM 2. Remove two screws from grille (Figure 37, 2) and save. 3. Remove the grille and grille cap from unit. 1 ULIN_0109_A Figure 35 9. Relocate plastic spacer/bushing (Figure 35) on bottom of door to the opposite side. Clean out bushing hole in door bottom if necessary. ULIN_0143_A Figure 38 4. Remove top hinge from cabinet (three screws) (Figure 38). Hold door to keep it from falling. 5. Lift the door off the bottom hinge. ULIN_011
Summary of the content on the page No. 20
ULIN_016357_30087.fm Page 20 Tuesday, March 14, 2006 2:36 PM 9. Relocate plastic spacer/bushing (Figure 42, 1) on bottom of door to opposite side, and place door on bottom hinge pin. Clean out bushing hole in door bottom with a screwdriver if needed. Hinge Plastic Plastic Plug Hole Plug Hole Screw Right Side Left Side Door Swing Door Swing Right Side Invert Invert ULIN_0122 _ A Hinge Screw Hinge ULIN_0142_A Figure 40 Figure 43 7. Remove screws on opposite side of cabinet (Figure 40). 10.
