Summary of the content on the page No. 1
Refrigerator
user manual
English
imagine the possibilities
Thank you for purchasing a Samsung product.
To receive a more complete service,
please register your product at
www.samsung.com/register
Free Standing Appliance
DA99-02028A(HM09')-EN(0.0).indd 1 2009.6.10 5:7:47 PM
Summary of the content on the page No. 2
features of your new refrigerator KEy fEaturEs of your nEw rEfrigErator Your Samsung Side-By-Side Refrigerator comes equipped with many space-saving, innovative storage and energy-efficient features. • HiDDEn HingEs & Door s/w Slick-covered hidden hinges & door s/w helps Neat & Stylish square frontal view. • Coolselect Zone™ Drawer (optional) With this state of the art feature, you can select Quick Cool, Thaw or Select buttons to quickly chill, thaw and cool items just in the CoolSelect drawe
Summary of the content on the page No. 3
safety information safEty inforMation • Before operating the appliance, please read this manual thor oughly and retain it for your WARNING reference. • Because these following operating instructions cover various models, the characteristics of your WARNING refrigerator may differ slightly from those described in this manual. CAUTION/WARNING SYMBOLS USED Indicates that a danger of death or serious injury exists. WARNING Indicates that a risk of personal injury or material damage exists. CAUTI
Summary of the content on the page No. 4
safety information • In order to avoid the creation of a flammable gas-air mixture if a leak in the refrigerating circuit occurs, the size of the room in which the appliance may be sited depends on the amount of WARNING refrigerant used. • Never start up an appliance showing any signs of damage. If in doubt, consult your dealer. 3 • The room must be 1m in size for every 8g of R600a refrigerant inside the appliance. • The amount of refrigerant in your particular appliance is shown on the
Summary of the content on the page No. 5
• The refrigerator must be grounded. - You must ground the refrigerator to prevent any power leakages or electric shocks caused by current leakage from the refrigerator. • Never use gas pipes, telephone lines or other potential lightening rods as ground. - Improper use of the ground plug can result in electric shock. • Do not dissemble or repair the refrigerator by yourself. - You run risk of causing a fire, malfunction and/or personal injury. • If you smell pharmaceutical or
Summary of the content on the page No. 6
safety information Caution signs for CLEaning • Do not insert your hands into the bottom area under the appliance. - Any sharp edges may cause personal injury. • Never put fingers or other objects into the dispenser hole and ice chute. - It may cause personal injury or material damage. • Do not use a wet or damp cloth when cleaning the plug, remove any foreign material or dust from the power plug pins. - Otherwise there is a risk of fire. • If the refrigerator is disconnected f
Summary of the content on the page No. 7
safety information aDDitionaL tiPs for ProPEr usagE • Allow the appliance to stand for 2hours after installation. • To get best performance of product, - Do not place foods too closely in front of the vents at the rear of the appliance as it can obstruct free air circulation in the freezer compartment. - Wrap the food up properly or place it in airtight containers before put it into the fridge freezer - Do not put any newly introduced food for freezing near to already frozen fo
Summary of the content on the page No. 8
contents 9 Getting ready to install the refrigerator sEtting uP your siDE-By-siDE 10 Removing the refrigerator doors rEfrigErator 13 Reattaching the refrigerator doors 16 Leveling the refrigerator 9 17 Making minor adjustments to the doors sEtting uP your siDE-By-siDE 18 Checking the water dispenser line(optional) rEfrigErator 19 Installing the water dispenser line 17 23 Setting up the refrigerator oPErating tHE saMsung 24 Operating the refrigerator siDE-By-siDE rEfrigErator 25 Us
Summary of the content on the page No. 9
01 sEtting uP setting up your side-by-side refrigerator gEtting rEaDy to instaLL tHE rEfrigErator Congratulations on the purchase of your Samsung Side-By-Side Refrigerator. We hope you will enjoy the many state-of-the-art features and efficiencies that this new appliance has to offer. Selecting the best location for the refrigerator • Select a location with easy access to the water supply. • Select a location without direct exposure to sunlight. • Select a location with level (or nearly lev
Summary of the content on the page No. 10
rEMoVing tHE rEfrigErator Doors If your entrance won’t allow the refrigerator to pass easily through it, you can remove the doors. 1. Removing the Front Leg Cover First, open both the freezer and refrigerator doors, and then take off the front leg cover by turning the three screws counter-clockwise. Separating the Water Supply Line from the Refrigerator 1 2 1. Remove the water line by pressing the coupler and pulling the water line away. 1 2 Do not cut the water line. Gently separate it from
Summary of the content on the page No. 11
01 sEtting uP setting up your side-by-side refrigerator 2. Removing the freezer door A few things to mention first. • Make sure that you lift the door straight up so the hinges are not bent or broken. • Be careful not to pinch the water tubing and wire harness on the door. • Place doors on a protected surface to prevent scratching or damage. 1 1. With the Freezer door closed, remove the upper hinge cover using a screwdriver, and then 2 disconnect the wires by gently pulling them apart .
Summary of the content on the page No. 12
Removing the Fridge Door 1 1. With the door closed, remove the upper hinge cover using a screwdriver. 1 2 3 2. Remove hinge screws and the ground screw by turning counter-clockwise, and take off 4 the upper hinge . Be careful that the door does not fall on you as you are removing it 2 3 4 5 6 3. Remove the door from the lower hinge by lifting the door straight up . 7 8 4. Remove the lower hinge from the bracket by gently lifting the lower hinge upwards. 12_ setting up DA99-02028A(HM0
Summary of the content on the page No. 13
01 sEtting uP setting up your side-by-side refrigerator rEattaCHing tHE rEfrigErator Doors Once you have safely placed your refrigerator where you plan for it to stay, it is time to put the doors back on. Reattaching the Freezer Door 1 1. Replace the freezer door by inserting the water line back into the 1 2 lower corner of the door and then into the hole on the lower hinge . Gently pull the water line back down so that it runs straight, with no kinks 2 or bends. 3 8 2. Insert the upper h
Summary of the content on the page No. 14
Reattaching the Fridge Door 1 2 1. Insert the lower hinge back into the lower hinge bracket . 1 2 3 4 2. Fit the hole in the corner of the fridge door over the lower hinge . 3 4 5 3. Insert the upper hinge shaft into the hole on the hinge 6 . Make sure the hinge is level between the upper hinge 7 8 hole and the hole on the top of the cabinet . Then, 9 10 reattach hinge screws and the ground screw by turning it in a clock wise direction. 11 12 4. Place the front part of the upper
Summary of the content on the page No. 15
01 sEtting uP setting up your side-by-side refrigerator Reattaching the Water Supply Line 1 2 1. Insert the water line into the coupler . 2 1 Reattaching the Front Leg Cover Before attaching the cover, check water connector for leakage. Replace the front leg cover by turning the three screws clockwise, as shown in the figure. front Leg Cover screw setting up _15 DA99-02028A(HM09')-EN(0.0).indd 15 2009.6.10 5:8:0 PM
Summary of the content on the page No. 16
LEVELing tHE rEfrigErator Now that the doors are back on the refrigerator, you will want to make sure the refrigerator is level so you can then make final adjustments. If the refrigerator is not level, it will not be possible to get the doors perfectly even. The front of the refrigerator is also adjustable. When the Freezer door is lower than the fridge Insert a flat-blade screwdriver into a notch on the Leg, turn it clockwise or counter clockwise to level the freezer.turning the three screws c
Summary of the content on the page No. 17
01 sEtting uP setting up your side-by-side refrigerator MaKing Minor aDJustMEnts to tHE Doors Remember, a leveling refrigerator is necessary for getting the doors perfectly even. If you need help, review the previous section on leveling the refrigerator. When the door of the freezer is higher than the fridge adjustment part In the case of the process to correct the imbalance is the same. Open the doors and adjust them, one at a time, as follows: 1 2 1. Unscrew the nut from the lower hinge
Summary of the content on the page No. 18
1 3. After adjusting the doors, turn the nut clockwise until it reaches the lower end of the 3 1 bolt, then tighten the bolt again with the wrench to fix the nut in place . 3 Wrench Bolt 2 1 Nut If you do not secure the nut firmly, the bolt may release. CHECKing tHE watEr DisPEnsEr LinE (oPtionaL) A water dispenser is just one of the helpful features on your new Samsung refrigerator. To help promote better health, the Samsung water filter removes unwanted particles from your water. Howeve
Summary of the content on the page No. 19
01 sEtting uP setting up your side-by-side refrigerator Connecting the water line to the refrigerator 1. Remove the cap from water line on the unit and insert compression nut to the water line on the unit after disassembling from provided water line. 2. Connect both water line from the unit and water line provided kit. 3. Tighten the compression nut onto the compression fitting. Be careful no gap between two items. 4. Turn water on and check for any leakage. Water Line from unit No gap Remove
Summary of the content on the page No. 20
instaLLing tHE watEr DisPEnsEr LinE For Exterior model Parts for water line Installation Water line fixer and pipe Water line purifier lock-clip screws connector purifier Connecting to the water supply line CAUTION Connect the water pipe with coupler and tap. The water line must be connected to the cold water pipe. If it is connected to the hot water 1. Close the main water tap. pipe, it may cause the purifier to malfunction. 2. Connect coupler “A” to the tap. COUPLER “A” WARRANTY INFORMATIO
