Summary of the content on the page No. 1
SIDE BY SIDE
REFRIGERATOR
OWNER’S MANUAL AND INSTALLATION
CONTENTS
SAFETY WARNING..............................................................................2
OPERATING INSTRUCTIONS ........................................................4
SETTING UP THE REFRIGERATOR.........................................................4
MAJOR FEATURES.....................................................................................4
CONTROL PANEL........................................................
Summary of the content on the page No. 2
SAFETY WARNING • Before operating the appliance, please read this manual thoroughly and retain it for your reference. • Because these following operating instructions cover various models, the characteristics of your refrigerator may differ slightly from those described in this manual • The appliance is not intended for use by children or infirm persons without adult supervision. WARNING • Children should be supervised to ensure that they do not play with the appliance. CAUTION/WARNINGS USED OTH
Summary of the content on the page No. 3
SAFETY WARNING CAUTIONS Do not overfill the refrigerator with food. • When you open the door, an item may fall out and cause personal injury or material damage. Do not put bottles or glass containers in the freezer . • When the contents freeze, the glass may break and cause personal injury. If the wall socket is loose, do not insert the power plug. • There is a risk of electric shock or fire. Do not use a wet or damp cloth when cleaning the Do not disconnect the power cord by pulling on it. plug
Summary of the content on the page No. 4
SETTING UP THE REFRIGERATOR Once you have performed the following steps, your refrigerator should be fully operational. If not, check the power supply and electricity source. If you have any questions, contact your SAMSUNG service center. Place the refigerator in an appropriate loca- Set the temperature control to the coldest tion with reasonable clearance between the temperature and wait for an hour. The wall and the refigerator. freezer should get slightly chilled and the (refer to installati
Summary of the content on the page No. 5
CONTROL PANEL Basic Model Dispenser Model (Child Lock) Dispenser Model (Moisture Control) FREEZER TEMP. BUTTON FRIDGE TEMP. BUTTON To set the freezer temperature, To set the fridge temperature, press the button repeatedly to press the button repeatedly to change the set temperature in change the set temperature in sequence between sequence between 7°C and 1°C. -14°C and -25°C POWER COOL BUTTON POWER FREEZE BUTTON Speeds up the cooling Speeds up the freezing process in process in the refrigerato
Summary of the content on the page No. 6
CONTROL PANEL Opitonal TM Basic Model (With CoolSelect Zone ) TM Dispenser Model (With CoolSelect Zone ) TM Dispenser Model (With CoolSelect Zone ) 6
Summary of the content on the page No. 7
DIGITAL PANEL Freezer Temp. indicates the current freezer temperature. Fridge Temp. indicates the current refrigerator temperature. TM Quick Cool,Thaw, and Select show the status of the CoolSelect Zone Drawer This light is on when you press the Power Freeze button. • Power Freeze Press this button to quickly return the freezer to the set temperature. If you need much ice, you can get ice faster. • Press the button again to cancel the Power Freezer mode. • This light is on when you press the Powe
Summary of the content on the page No. 8
TEMPERATURE CONTROL Freezer Refrigerator The refrigerator temperature can be set between • The freezer temperature can be set between • 7°C and 1°C. -14°C and -25°C. Press the Fridge Temp. button repeatedly until the • Press the Freezer Temp. button repeatedly until the • desired temperature is shown in the temperature dis- desired set temperature is shown in the temperature play. display. The temperature display changes in sequence and • The temperature display changes in sequence • reverts in
Summary of the content on the page No. 9
SHELVES AND BINS Freezer Light TM Xtra Space Door Bin Light Ice Chute Light Switch Ice Maker Glass Shelf Pockets Plastic Drawers Front Leg Cover Basic Model Dispenser Model Refrigerator Dairy Compartment Water Filter (optional) Light (upper) Wine Shelf (optional) Spill-proof glass Shelf Muti-purpose Bin Light Switch Foldable Shelf (optional) TM Beverage Station (optional) Deodorizer Lights (lower) Egg Container TM CoolSelect Zone Drawer or Chilled Bin (optional) Door Bin Top Lips Vegetable &
Summary of the content on the page No. 10
FOOD STORAGE GUIDE Basic Model Dispenser Model FROZEN FOOD STORAGE IN FREEZER TM Xtra Space • Can be used for frozen foods such as pizza, pasta, burri tos, and fajitas. • In order to prevent odor penetration to the ice, stored food should be wrapped securely. Tempered Glass Shelf • Can be used to store all types of frozen food. Door Bin • Can be used for small packages of frozen food. Plastics Drawer • Can be used to store meat and dry foods. Stored food should be wrapped securely using foi
Summary of the content on the page No. 11
FOOD STORAGE GUIDE CHILLED FOOD STORAGE IN REFRIGERATOR Tempered Spill Proof Glass Shelf Can be used to store all types of chilled food. • • Safe and hard to break resistant. Circular marks on the glass surface are a normal phenomenon. • TM Chilled Bin or CoolSelect Zone Drawer (optional) • Helps to preserve the taste of food and prolongs its freshness. Use to store cheese, meat, poultry, fish or any other foods used quickly. Fruit & Vegetable Drawer (Upper and Lower) • Is used to store frui
Summary of the content on the page No. 12
TM CoolSelect Zone Drawer GUIDE “Select” button (Optional) Soft Freeze • When “Soft Freeze” is chosen, the temperature on the o digtal panel displays -5 C regardless of the set tempera- ture of the refrigerator. “Soft-Freeze” temperature helps keep meats and fishes • fresh longer. Can cut meat easily without drips. • Chill When “Chill” is chosen, the temperature of the • CoolSe- o TM Drawer is kept at -1 C regardless of the set lect Zone refrigerator temperature. “Chill” temperature helps kee
Summary of the content on the page No. 13
TM CoolSelect Zone Drawer GUIDE “Quick Cool” button TM You can use the Quick Cool feature with the CoolSelect Zone . • “Quick Cool” allows 1~3 canned beverages to cool within 60 min. • To cancel this option, press the “Quick Cool” button again. • TM CoolSelect Zone returns to the previous temperature. When “Quick Cool” ends, it returns to the “Cool” temperature set- • ting. Depending on the beverages, the cool-down time may vary. NOTE TM For “Quick Cool” option, food stored in the CoolSelect
Summary of the content on the page No. 14
REMOVING THE FREEZER ACCESSORIES Ice maker bucket (optional) Glass shelf Remove the bucket by lifting up and pulling out. • Pull the shelf out as far as • it goes. Then lift it up and remove it. Front leg cover Open the freezer and refriger- • Door bin ator doors, remove three Hold the door bin with both • screws and detach the cover. hands and then lift it up. To reassemble the cover leg • front, put it back to original position and tighten the three screws. Plastic drawer Remove the drawer b
Summary of the content on the page No. 15
TM optional) BEVERAGE STATION ( TM TM To open the Beverage Station , hold the Beverage Station door handle and pull it downward. TM The Beverage Station is convenient It is recommended that you use the • • TM and reduces energy consumption, Beverage Station for storing most because you do not need to open frequently needed foods the refrigerator door to access stored beverages and snacks. TM TM • The door of the Beverage Station should never be removed. The Beverage Station cannot function if i
Summary of the content on the page No. 16
CLEANING THE ACCESSORIES Deodorizer Remove the cover with a flat blade screw driver as shown. • Take out the cartridge from the cover and soak it in clean, warm water • at least than 4 hrs. Completely dry out the cartridge with sunlight for at least 8 hrs in an open area. Repeat this process once or twice a year. • If it is dried in a confined area, odor may be spread to that area. • • Keep the children away from yellow water, they may drink water. NOTE CHANGING THE INTERIOR LIGHT Before chan
Summary of the content on the page No. 17
CHANGING THE INTERIOR LIGHT INTERIOR LIGHT IN THE FREEZER (Dispenser Model) Use a screwdriver to remove Change the bulb with a new Reattach the light cover the light cover ( ). one ( ) ➀ ➁ To replace freezer and refrigerator light bulbs (Bulb size E14), please contact SAMSUNG dealer. NOTE INTERIOR LIGHT IN THE FREEZER (Basic Model) Pull out the screw cap and Push the lamp cover in the After changing the bulb, ➀ direction of the arrows. reattach the light cover remove the screw. and screw it in
Summary of the content on the page No. 18
INSTALLATION OF THE REFRIGERATOR Checking the Dimensions of your Entrance Door • Check the dimensions of your entrance door to determine whether the refrigerator can pass through it. • When refrigerator passes in door and depth or width of refrigerator is bigger, removes NOTE refrigerator doors. Selecting the Location for the Refrigerator • Select a location with easy access to the water supply. • Select a location with enough space for the refrigerator. • Select a location without direct expo
Summary of the content on the page No. 19
REMOVING THE REFRIGERATOR DOORS Removing the Front Leg Cover (Optional) Open the freezer and refrigerator doors, and then take off the front leg cover assembly by turn- ing the three screws counter-clockwise. a FRONT LEG COVER SCREW Separating the water supply line from the refrigerator (Optional) 1) Remove the screw from clamp ( ). a 2) Remove the water tube by pressing the coupler (➁) and pulling the water tube (➀) away. Do not cut the water tube but separate it from the coupler. WARNING 19
Summary of the content on the page No. 20
REMOVING THE REFRIGERATOR DOORS • Lift the door straight up. Be careful not to pinch the water tubing and wire harness on the door. • NOTE Place doors on a protected surface. • Removing the Freezer Door 1) With the door closed, remove the upper hinge cover (➀) using a screwdriver, and then discon- nect the wires (➁). 2) Remove hinge screws ( ) and ground screw ( ) counter-clockwise, and take off the upper ➂ ➃ hinge (➄) along the arrow (➅). Take care when removing the door to ensure that it does
