Summary of the content on the page No. 1
Compact Disc Player
C-7000R
Instruction Manual
En
Summary of the content on the page No. 2
Introduction AVIS WARNING WARNING: RISK OF ELECTRIC SHOCK RISQUE DE CHOC ELECTRIQUE TO REDUCE THE RISK OF FIRE OR ELECTRIC DO NOT OPEN NE PAS OUVRIR SHOCK, DO NOT EXPOSE THIS APPARATUS TO The lightning flash with arrowhead symbol, within an RAIN OR MOISTURE. equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within CAUTION: the product’s enclosure that may be of sufficient TO REDUCE THE RISK OF ELECTRIC SHOCK, magnitude to constitute a r
Summary of the content on the page No. 3
Precautions 1. Recording Copyright—Unless it’s for personal use 7. Never Touch this Unit with Wet Hands—Never 10. Moisture Condensation only, recording copyrighted material is illegal without handle this unit or its power cord while your hands are Moisture condensation may damage this unit. the permission of the copyright holder. wet or damp. If water or any other liquid gets inside Read the following carefully: 2. AC Fuse—The AC fuse inside the unit is not user- this unit, have it checked by yo
Summary of the content on the page No. 4
This unit contains a semiconductor laser system and is is encouraged to try to correct the interference by one or For British models classified as a “CLASS 1 LASER PRODUCT”. So, to use more of the following measures: Replacement and mounting of an AC plug on the power this model properly, read this Instruction Manual Reorient or relocate the receiving antenna. supply cord of this unit should be performed only by carefully. In case of any trouble, please contact the store Increase the se
Summary of the content on the page No. 5
Features Plays Audio CD, CD-R, CD-RW, MP3 CD, * and WMA CD DIDRC (Dynamic Intermodulation Distortion Reduction Circuitry) Separate Digital/Analog Circuitry Separate Massive Transformers for Digital and Analog Circuitry (Toroidal Transformer for Analog Circuitry) Thermally Regulated High-Precision Clock Silent Disc Mechanism with Solid Die-Cast Aluminum Tray Separate Anti-Vibration Aluminum Panels for Top, Front, and Sides Side-mounted Circuit Board Construction to Reduce V
Summary of the content on the page No. 6
Technologies DIDRC (Dynamic Intermodulation Separate Digital/Analog Circuitry and PLL (Phase Locked Loop) Ultra-Low Jitter Distortion Reduction Circuitry) Transformers Technology Since the advent of digital audio, the values of To prevent unwanted interference, the C-7000R Jitter is an unwanted side-effect of the digital- S/N (signal-to-noise) ratio have risen employs physically separate circuitry for digital to-analog conversion process caused by significantly. However, it is also recognized
Summary of the content on the page No. 7
Block Diagram DIDRC (Dynamic Intermodulation Distortion Reduction Circuitry) En 7
Summary of the content on the page No. 8
Supplied Accessories Make sure you have the following accessories: Remote controller and two batteries Audio connection cable Remote controller (RC-796C). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (1) Audio connection cable (0.8 m/2.6 ft) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (1) Batteries (R03/AAA). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (2) *
Summary of the content on the page No. 9
Contents Introduction Important Safety Instructions .................................................................................2 Precautions...............................................................................................................3 Features ....................................................................................................................5 Technologies .....................................................................................................
Summary of the content on the page No. 10
Before Using the Compact Disc Player Installing the Batteries Using the Remote Controller Installing the Compact Disc Player To use the remote controller, point it at the compact disc To open the battery compartment, press the small 1 player’s remote control sensor, as shown below. hollow and slide the cover. Remote control sensor Compact disc player 20 cm (8") 10 cm (4") 30° off center 10 cm (4") Insert the two supplied batteries (R03/AAA) in Approx. 16 ft. (5 m) 2 (Left/Right) accordance wi
Summary of the content on the page No. 11
Getting to Know the Compact Disc Player Front Panel The page numbers in parentheses show where you can find the main explanation for each item. ON/STANDBY button (➔ 21) button (➔ 22) POWER switch (➔ 21) Use this button to set the compact disc player to On or Opens and closes the disc tray. This is the main power switch. When set to the OFF Standby. position ( ), the compact disc player is completely button (➔ 22) shutdown. It must be set to the ON position (
Summary of the content on the page No. 12
Display For detailed information, see the pages in parentheses. indicator (➔ 22) TOTAL indicator (➔ 21) MP3 indicator (➔ 21) Lights during playback. Lights when the total and remaining time of the track Lights together with the folder name, file number or are shown. file name which contains MP3 tracks. indicator (➔ 22) REMAIN indicator (➔ 30) WMA indicator (➔ 21) Lights when playback is paused. Lights when the remaining time of the track is shown. Lights together wit
Summary of the content on the page No. 13
Rear Panel AUDIO OUTPUT DIGITAL OPTICAL jack AUDIO OUTPUT ANALOG L/R jacks Connect the analog audio in jack of an amplifier or This optical digital audio output is for connecting similar to this jack, using the supplied audio cable. components with optical digital audio inputs, such as preamplifier. AUDIO OUTPUT DIGITAL AES/EBU jack AC INLET This balanced AES/EBU output is for connecting a component with a balanced AES/EBU input. The supplied power cord is connected here. The other
Summary of the content on the page No. 14
Remote Controller You can also use the remote controller to control your Onkyo C-7000R. For detailed information, see the pages in parentheses. button (➔ 21) / / / and ENTER buttons Sets the compact disc player to On or Standby. Used to select and adjust settings. DIMMER button (➔ 24) SEARCH button (➔ 29) Adjusts the display brightness. Search for a folder on a disc containing MP3 or WMA tracks. DISPLAY button (➔ 30) SETUP button Displays information ab
Summary of the content on the page No. 15
Disc Note Supported Discs CD playback with copy-control function Precautions for Inkjet Printable Discs The compact disc player supports the following discs. Some audio CDs with copy-control function do not Do not leave a CD-R/CD-RW having a label printed with comply with official CD standards. These are special discs an inkjet printer in the compact disc player for a long time. Audio CD PCM and cannot be played with this compact disc player. The disc could get stuck in the compact disc player
Summary of the content on the page No. 16
Playback of MP3 and WMA CDs Playback of WMA CDs ® MP3 and WMA files recorded on a CD-R/CD-RW can be WMA stands for “Windows Media Audio”, an audio played with this compact disc player. compression technology developed by Microsoft Corporation USA. Use discs which have been recorded following the ISO9660 Level 2 file system. (The supported directory Only WMA files with the extension “.WMA” or “.wma” depth is eight levels, the same as ISO9660 Level 1) are supported. Discs recorded with t
Summary of the content on the page No. 17
Connections Connections Cable and Jacks Balanced AES/EBU This is a professional digital audio interface. Balanced AES/EBU cables are used for better noise immunity and longer cable runs. The maximum sampling rate for PCM output is 44.1 kHz/16 bit, 2ch. Optical digital audio Optical digital connections allow you to enjoy digital sound. The maximum sampling rate for PCM input is 44.1 kHz/16 bit, 2ch. OPTICAL Coaxial digital audio Coaxial digital connections allow you to enjoy digital sound. The m
Summary of the content on the page No. 18
Connecting the Power Cord AC INLET Compact Disc Player C-7000R Supplied power cord To an AC wall outlet (Plug type varies from country to country.) Make sure that the main power of the compact disc 1 Note player is turned off. Never disconnect the power cord from the compact disc player while the other end is still plugged into a wall outlet. Connect all of your components. 2 Doing so may cause an electric shock. Always disconnect the power cord from the wall outlet first, and then the c
Summary of the content on the page No. 19
Connecting a Preamplifier or Integrated Amplifier Analog Connection Digital (Optical or Coaxial) Connection Preamplifier P-3000R Preamplifier P-3000R L R Connect either of them. Compact Disc Player C-7000R Compact Disc Player C-7000R This is an example of digital connection using the preamplifier P-3000R. This is an example of analog connection using the preamplifier P-3000R. Connect either of them. En 19
Summary of the content on the page No. 20
Digital (AES/EBU) Connection Preamplifier P-3000R Compact Disc Player C-7000R This is an example of AES/EBU connection using the preamplifier P-3000R. En 20
