Summary of the content on the page No. 1
REFRIGERATOR
OVERLAY MODEL
Use & Care Guide
For questions about features, operation/performance, parts, accessories, or service, call: 1-800-422-1230 or visit our website at...
www.kitchenaid.com
In Canada, call: 1-800-807-6777, or visit our website at www.KitchenAid.ca
REFRIGERADOR
MODELO RECUBIERTO
Manual de uso y cuidado
Para consultas respecto a características, operación/desempeño, partes, accesorios o servicio, llame al: 1-800-422-1230
o visite nuestra página de internet...
www.kitchenaid
Summary of the content on the page No. 2
TABLE OF CONTENTS REFRIGERATOR SAFETY .............................................................3 Lower Shelf...................................................................................9 Proper Disposal of Your Old Refrigerator....................................3 Wire Storage Bin ..........................................................................9 INSTALLATION INSTRUCTIONS ..................................................4 DOOR FEATURES ........................................
Summary of the content on the page No. 3
REFRIGERATOR SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.” These words mean: You can be killed or seriously injured if you don't immediatel
Summary of the content on the page No. 4
INSTALLATION INSTRUCTIONS Install Overlay Hooks T ools and Parts TOOLS NEEDED: Using a Phillips screwdriver and eight flat-head screws attach the Gather the required tools and parts before starting installation. overlay hooks to the back of the overlay panel. See “Overlay Panel–Rear View,” for overlay hook locations. Read and follow the instructions provided with any tools listed here. ■ Hand drill or electric drill ■ Scissors (properly grounded) ■ Masking tape ■ ¹⁄₂" Brad point doweling ■ T
Summary of the content on the page No. 5
Bottom View Electrical Requirements ¹⁄₂" (1.2 cm) A WARNING Front Surface Back Surface ¹⁷⁄₃₂" (1.35 mm) Electrical Shock Hazard A. Radius 5.0 Plug into a grounded 3 prong outlet. Do not remove ground prong. Location Requirements Do not use an adapter. Do not use an extension cord. WARNING Failure to follow these instructions can result in death, fire, or electrical shock. Before you move your refrigerator into its final location, it is important to make sure you have the proper electrical co
Summary of the content on the page No. 6
3. Open the door. Lift the front of the door up, pulling straight Clean Before Using out to remove as shown. After you remove all of the package materials, clean the inside of your refrigerator before using it. See the cleaning instructions in “Refrigerator Care.” Important information to know about glass shelves and covers: Do not clean glass shelves or covers with warm water when they are cold. Shelves and covers may break if exposed to sudden temperature changes or impact, such as bumpi
Summary of the content on the page No. 7
7. Remove the masking tape from the door. Install the Door Door Closing IMPORTANT: To ensure proper operation, be sure to grease the top hinge, top spacer and washer with petroleum jelly. Door Closing 1. Using a Phillips screwdriver and three screws, attach the top spacer to the door. Your refrigerator has four leveling legs. If your refrigerator seems 2. Using petroleum jelly, grease the bottom spacer hole and the unsteady or you want the door to close more easily, adjust the bottom hinge
Summary of the content on the page No. 8
Base Grille Using the Control For your convenience, your refrigerator control is preset at the Remove the Base Grille factory. When you first install your refrigerator, make sure that the control is still preset to the mid-setting as shown. 1. Open the refrigerator door. 2. Using a Phillips screwdriver, remove the two screws. Push both tabs in toward the center to release the base grille from the refrigerator. Adjusting Controls The mid-setting indicated in the previous section should be c
Summary of the content on the page No. 9
Lower Shelf REFRIGERATOR CARE To Remove and Replace Lower Shelf: 1. Remove the shelf by lifting it up and pulling it forward. 2. Replace the shelf by lowering it on the guides. Cleaning WARNING Explosion Hazard Use nonflammable cleaner. Wire Storage Bin Failure to do so can result in death, explosion, or fire. To Remove and Replace Wire Storage Bin: 1. Remove the bin by pulling it forward. Clean the refrigerator about once a month to avoid build-up of 2. Replace the bin by sliding it back into
Summary of the content on the page No. 10
Changing the Light Bulb V acation and Moving Care NOTE: Not all appliance bulbs will fit your refrigerator. Be sure to replace the bulb with one of the same size, shape, and wattage. Vacations To change the light bulb: If you choose to leave the refrigerator on while you’re away, use 1. Unplug refrigerator or disconnect power. up any perishables and freeze other items. 2. Using a Phillips screwdriver, remove the screw located at the If you choose to turn the refrigerator off before you leave,
Summary of the content on the page No. 11
■ Has a large amount of food just been added to the ■ Is the food packaged correctly? Check that all food is refrigerator? Adding a large amount of food warms the securely wrapped. Wipe off damp food containers before refrigerator. It is normal for the motor to run longer in order to placing in the refrigerator. cool the refrigerator back down. ■ Is the control set correctly for the surrounding ■ Is the door opened often? Expect the motor to run longer conditions? See “Using the Control.” wh
Summary of the content on the page No. 12
ASSISTANCE OR SERVICE Before calling for assistance or service, please check “Troubleshooting.” It may save you the cost of a service call. If In Canada you still need help, follow the instructions below. Call the KitchenAid Canada Customer Interaction Centre toll free: When calling, please know the purchase date and the complete 1-800-807-6777. model and serial number of your appliance. This information will Our consultants provide assistance with: help us to better respond to your reques
Summary of the content on the page No. 13
® KITCHENAID REFRIGERATOR WARRANTY ONE YEAR LIMITED WARRANTY For one year from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or furnished with the product, KitchenAid or KitchenAid Canada (hereafter “KitchenAid”) will pay for factory specified parts and repair labor to correct defects in materials or workmanship. Service must be provided by a KitchenAid designated service company. SECOND THROUGH FIFTH YEAR LIMITED WARRANTY ON C
Summary of the content on the page No. 14
SEGURIDAD DEL REFRIGERADOR Su seguridad y la seguridad de los demás es muy importante. Hemos incluido muchos mensajes importantes de seguridad en este manual y en su electrodoméstico. Lea y obedezca siempre todos los mensajes de seguridad. Este es el símbolo de advertencia de seguridad. Este símbolo le llama la atención sobre peligros potenciales que pueden ocasionar la muerte o una lesión a usted y a los demás. Todos los mensajes de seguridad irán a continuación del símbolo de advertencia de
Summary of the content on the page No. 15
INSTRUCCIONES DE INSTALACIÓN Panel Recubierto - Vista posterior Piezas y herramientas HERRAMIENTAS NECESARIAS: Cree su panel recubierto a la medida utilizando las medidas que Reúna las herramientas y piezas necesarias antes de comenzar se muestran. la instalación. Lea y siga las instrucciones provistas con cualquiera de las 4¹³⁄₃₂" herramientas enlistadas aquí. (11,2 cm) 1⁵⁄₁₆" ■ Taladro manual o ■ Tijeras (3,33 cm) eléctrico (debidamente ■ Cinta adhesiva protectora conectado a tierra) ■ Cint
Summary of the content on the page No. 16
NOTA: No se recomienda instalar el refrigerador cerca de un Orificios de la bisagra de la puerta horno, radiador u otra fuente de calor. No instale en un lugar donde la temperatura puede ser menor de 55°F (13°C). Para ■ Las vistas del orificio de la espiga de la bisagra superior e obtener un óptimo funcionamiento, no instale el refrigerador detrás de la puerta de un armario ni bloquee la rejilla de la base. inferior ilustran una bisagra del lado derecho. Refleje la imagen para una bisagra d
Summary of the content on the page No. 17
Desempaque el refrigerador Cómo instalar el panel recubierto a la medida IMPORTANTE: ■ Cree un panel recubierto a la medida de acuerdo con las ADVERTENCIA especificaciones en la sección “Panel recubierto a la medida”. Peligro de Peso Excesivo ■ KitchenAid no es responsable de la remoción o adición de Use dos o más personas para mover e instalar molduras o paneles decorativos que pudieran impedir el el refrigerador. acceso al refrigerador para darle servicio. No seguir esta instrucción pued
Summary of the content on the page No. 18
3. Instale la puerta insertando la espiga de la bisagra inferior en Cómo fijar el panel recubierto el orificio del espaciador inferior. Asegúrese de que la arandela se mantenga en su lugar. Lentamente baje la puerta en forma derecha y pareja hasta la espiga de la bisagra NOTA: Si los ganchos recubiertos no están instalados, consulte inferior. Cierre la puerta. Asegúrese de que la puerta esté “Panel recubierto a la medida” para ver las ubicaciones de los ganchos recubiertos. correctamente
Summary of the content on the page No. 19
Cómo cerrar la puerta Rejilla de la base Cómo cerrar la puerta Quite la rejilla de la base Su refrigerador tiene cuatro patas niveladoras. Si su refrigerador 1. Abra la puerta del refrigerador. parece inestable o usted quiere que las puertas se cierren con 2. Saque los dos tornillos con un destornillador Phillips. Empuje mayor facilidad, ajuste la inclinación del refrigerador usando las ambas lengüetas hacia el centro para liberar la rejilla de la instrucciones siguientes. base del refrigera
Summary of the content on the page No. 20
NOTA: Asegúrese de que el estante esté nivelado. Uso del control Para su comodidad, el control de su refrigerador ha sido prefijado de fábrica. Al instalar su refrigerador por primera vez, cerciórese de que el control aún esté prefijado en el ajuste medio, como se ilustra. Cómo ajustar los controles El ajuste medio indicado en la sección previa debe estar correcto Estante inferior para el uso normal de un refrigerador familiar en el hogar. El Para quitar y volver a colocar el estante infer
