Summary of the content on the page No. 1
®
Professional Disc Jockey Products
CDN22 - PROFESSIONAL DUAL CD PLAYER
OPERATING MANUAL
NUMARK INDUSTRIES
11 Helmsman Avenue, North Kingstown, RI 02852 http://www.numark.com
Summary of the content on the page No. 2
CDN-22 6. Heat - Avoid placing this product to close CAUTION to any high heat sources such as radiators. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE ANY COVER. NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY. 7. Power Sources - This product should be The lightning flash with arrowhead symbol within the connected to a power supply only of the type equilateral triangle is intended to alert the user to t
Summary of the content on the page No. 3
CDN-22 12. Internal/External Voltage Selectors - Internal or NOTICE CONCERNING FCC REGULATIONS external voltage selector switches, if any, should only This equipment generates and uses radio frequency be reset and re-equipped with a proper plug for energy and may cause interference to radio and alternative voltage by a qualified service technician. television reception if you do not operate it in strict Do not attempt to alter this yourself. accordance with the procedures detailed in this OPERAT
Summary of the content on the page No. 4
CDN-22 ® CDN-22 PROFESSIONAL DUAL-TRANSPORT CD PLAYER WITH REMOTE CONTROLLER CONGRATULATIONS... You have just purchased a dual CD player designed specifically for the professional DJ. This unit has been designed to provide CD mixing with the same ease and creativity that you have enjoyed with records. Please take a few moments to familiarize yourself with the CDN-22 by reading the following information before attempting to operate the unit. Once again, congratulations and thank you for mak
Summary of the content on the page No. 5
CDN-22 TABLE OF CONTENTS Safety and Registration 2 Introduction 4 Set-up Instructions & Connections 7 Description of the Features Features of the Remote Control Unit 8 Features of the Display 9 Basic Operation Play, Pause and Cue Operations 10 Matching the Beats Per Minute 11 Beat Matching Using Pitch Bend 12 Example of Mixing with the CDN-22 13 Before Switching off the Power 14 Troubleshooting Guide 14 Information and Specifications 15 Warranty 16 Numark - The Proven Leader in DJ Technology ©19
Summary of the content on the page No. 6
CDN-22 CHECK TO BE SURE THE FOLLOWING ITEMS ARE IN THIS BOX: 1) DUAL-TRANSPORT PLAYER UNIT 1) REMOTE CONTROL UNIT 1) OWNERS MANUAL (THIS BOOKLET) 2) RCA CONNECTING CABLES 2) CONTROL CABLES 1) IEC POWER CORD Numark - The Proven Leader in DJ Technology ©1998 Numark Industries 6 http://www.numark.com
Summary of the content on the page No. 7
CDN-22 CONNECTIONS Typical connection with a mixer is illustrated right. Please use it for reference. •Connect the output connection cords from the CD Player to the line inputs of your mixer. •Connect the remote control connection cable from the Unit 1 connector on the main unit to the Unit 1 connector on the remote control unit. Repeat for Unit 2. •The output connection cords and the remote control connection cables are supplied with the main unit. Be sure to use the remote control connecti
Summary of the content on the page No. 8
CDN-22 DESCRIPTION CDN-22 REMOTE FEATURES 1. PROGRAM - Depress this button and the unit will stop and released. By changing the pitch of one disc with respect to the the program indicator will light. Select each track to be other in this way the beats can be matched. programmed and press the PROGRAM button between selections. You can program up to 30 tracks. Press PLAY to 10. SEARCH WHEEL (OUTER RING) - This wheel has 3 start the program. To exit and erase program hold the program forward an
Summary of the content on the page No. 9
CDN-22 LCD DISPLAY FEATURES 1. PLAY - Active while the unit is actually playing a CD. 7. PITCH - is lit when the PITCH BUTTON is active. 2. PAUSE - Active when the unit is paused. 8. TIME BAR - shows either time remaining or elapsed depending on the setting of the TIME BUTTON (4). 3. CUE - Flashing when the unit is setting a cue point. Lit continuously when the unit is paused at a cue point. 9. PITCH - Shows the percentage change in pitch. 4. PROGRAM - used for preprograming the track order to 1
Summary of the content on the page No. 10
CDN-22 DESCRIPTION OF THE PLAY/PAUSE AND CUE OPERATIONS PLAY and CUE Pressing the “PLAY/PAUSE” button starts the disc. Pressing the “CUE” button will reset the disc to the last place where the disc was started. This is called the cue point. By alternately pressing the “PLAY/PAUSE” button and the “CUE” button, the disc may be returned and played from the cue point any number of times. This function is called back cue. PLAY, PAUSE and CUE EDITING CUE POINT When the inner search dial is turned
Summary of the content on the page No. 11
CDN-22 MATCHING THE BEATS PER MINUTE (BPM) Match the tempo by monitoring the music of both PLAYER 1 and PLAYER 2 by ear and adjusting the pitch. When the tempo of the music of the selected CD player is slow compared to the tempo of the other player, move the slider to the ( + ) side and match the tempo. When faster, move the pitch slider to the ( - ) side. The following description is for the case of matching the pitch of PLAYER 2 to the pitch of the music being played on PLAYER 1. Pre
Summary of the content on the page No. 12
CDN-22 BEAT MATCHING USING PITCH BEND BPM’s (Beats Per Minute) are the same, however, the drum beats are not matched A description of the procedure for matching the beat of PLAYER 1 and PLAYER 2 using the PITCH BEND button. This description is for the case of matching the beat of PLAYER 2 to the beat of the music being played on PLAYER 1. (This procedure can be done on either PLAYER). After Matching the BPM’s adjust the pitch temporarily as follows: When PLAYER 2 is ahead press the --
Summary of the content on the page No. 13
CDN-22 EXAMPLE OF MIXING USING BOTH PLAYERS OF THE CDN22 While playing a disc on PLAYER 1 load a disc into PLAYER 2 and select your next track, match its pitch to the track playing on PLAYER1 and when you are ready use the crossfader on your mixer to fade from PLAYER 1 to PLAYER 2. PLAYER 1 PLAYER 1 PLAYER 1 Load a disc in PLAYER 1 and select the track and press PLAY. Load a disc and press the Select the track to be played. Press the PLAY button OPEN/CLOSE button. PLAYER 2 PLAYER 2 PLAYER 2 Load
Summary of the content on the page No. 14
CDN-22 BEFORE SWITCHING OFF THE POWER: When you have finished using the CD player, be sure that the disc tray is closed with the “OPEN/CLOSE” button before switching off the power . DO NOT switch off the power when Switch off the power after the the disc holder is open. disc holder has been closed with the “OPEN/CLOSE” button Troubleshooting Guide Symptom Possible Cause Corrective Action The power fails to switch on when the Poor power plug connection at the AC Insert the power plug firmly int
Summary of the content on the page No. 15
CDN-22 SPECIFICATIONS GENERAL Dimensions: Main Unit: 482 (W) x 88.8 (H) x 264 (D) mm (without feet) 19 (W) x 3.5 (H) x 10 3/8 (D) inches (without feet) Control Unit: 482 (W) x 88.8 (H) x 74 (D) mm (without feet) 19 (W) x 3 1/2 (H) x 2 7/8 (D) inches (without feet) Weight: Player Unit: 5 Kgs, 11 lbs Control Unit: 2 Kgs, 4.4 lbs Power Supply: 115/230V AC, 50/60Hz Power Consumption: 25W Numark - The Proven Leader in DJ Technology ©1998 Numark Industries 15 http://www.numark.com
Summary of the content on the page No. 16
® Professional Disc Jockey Products Warranty and Service Information Numark Industries, LLC and Numark International, Inc. (hereafter “Numark”) warrants each new product manufactured and/or supplied by it to be free from defects in material or workmanship under conditions of normal use and service for 360 days, beginning on the date of purchase from an authorized Numark Dealer, but not to exceed 2 years from date of shipment by Numark. The Numark obligation under this warranty is limited t
