Summary of the content on the page No. 1
®
Side by Side Refrigerator
I< i._=
*i _< i >II I
Refrigerador de dos puertas
R_fri _rateur c6te & c6te
..........., =+,.,,_ ,.>.;+ I,.,I................................. i;91 ,.,.,_ _; ........ _< ==I.,.>.+ _<.I_+ ==_<
II
Sears Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
2211835 Sears Canada, Inc., Toronto, Ontario, Canada M5B 2B8 www.sears,com
Summary of the content on the page No. 2
TABLE OF CONTENTS WARRANTY WARRANTY ......................................................................... 2 ONE-YEAR FULL WARRANTY ON REFRIGERATOR For one year from the date of purchase, when this refrigerator is REFRIGERATOR SAFETY ............................................... 3 operated and maintained according to instructions attached to or Proper Disposal of Your Old Refrigerator .................................... 3 furnished with the product, Sears will repair this refrigerator, fre
Summary of the content on the page No. 3
REFRIGERATOR SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word "DANGER" or This is the safety alert symbol. "WARNING." These words mean: You can be killed or seriously injured if you don't immediately
Summary of the content on the page No. 4
INSTALLING YOUR REFRIGERATOR Explosion Hazard Keep flammable materials and vapors, such as gasoline, away from refrigerator. Failure to do so can result in death, explosion, or fire. Removing packaging materials • Remove tape and glue from your refrigerator before using. • To ensure proper ventilation for your refrigerator, allow for 1/2in. (1.25 cm) space on each side and at the top. To remove any remaining tape or glue, rub the area briskly with your thumb. Tape or glue residue can also be eas
Summary of the content on the page No. 5
ElectricalShockHazard Plugintoagrounded3 prongoutlet. Donot removegroundprong. To remove the base grille: Donot useanadapter. 1. Open both refrigerator doors. Donot useanextensioncord. 2. Place hands along the ends of the grille, with your thumbs along the top. Push in with your thumbs and pull up on the Failureto followtheseinstructionscanresultin bottom. death,fire,or electricalshock. NOTE: Be sure to refasten the Tech Sheet behind the base grille after cleaning. Before you move your refrigera
Summary of the content on the page No. 6
TOOLS NEEDED: 1/4 in.hex-head socket wrench, 5A6 in.hex-head socket wrench andaflat-head screwdriver. IMPORTANT: Before youbegin, turntherefrigerator control OFF, unplug refrigerator ordisconnect power. Remove foodandany adjustable doororutilitybinsfromdoors. Electrical Shock Hazard Disconnect power before removing doors. Reconnect both ground wires before operating. Failure to do so can result in death or electrical shock. Door Removal Top Left Hinge Top Right Hinge Style 1 Style 2 Style 2 m Ha
Summary of the content on the page No. 7
Tools Needed: ¼ in. hex-head socket wrench, 5/16in. hex-head Door and Hinge Replacement socket wrench and a flat-head screwdriver. 1. Replace both bottom hinges, if removed. Tighten screws. NOTE: It may only be necessary to remove either the door handle 2. Assistance may be needed to feed the water dispenser or the doors to get your product through the doorway of your tubing through the bottom hinge while reinstalling the freezer residence. Measure the door opening to determine whether to door.
Summary of the content on the page No. 8
5. Using a grounded drill, drill a 1/4in. hole in the cold water pipe you have selected. ,_ ,,f 1 7 , "HHH" 2 Read all directions carefully before you begin. IMPORTANT: • If operating the refrigerator before installing the water H, ,_,3 connection, turn ice maker to the OFF position to prevent operation without water. • All installations must be in accordance with local plumbing code requirements, 1. Cold Water Pipe 2. Pipe Clamp • Use copper tubing and check for leaks. 3. Copper Tubing • Instal
Summary of the content on the page No. 9
Rattling noises may come from the flow of refrigerant, the water line, or items stored on top of the refrigerator. Your refrigerator is designed to run more efficiently to keep Please read before using the water system. your food items at the desired temperature. The high Immediately after installation, follow the steps below to make efficiency compressor may cause your new refrigerator to run sure that the water system is properly cleaned. longer than your old one, and you may hear a pulsating
Summary of the content on the page No. 10
For your convenience, your refrigerator controls are preset at Give the refrigerator time to cool down completely before adding the factory. When you first install your refrigerator, make sure food. It is best to wait 24 hours before you put food into the that the controls are still preset. The Refrigerator Control and the refrigerator. The settings indicated in the previous section should Freezer Control should both be at the "mid-settings" as shown in be correct for normal household refrigerat
Summary of the content on the page No. 11
3. Remove the glass to stop dispensing. NOTE: The first few batches of ice may have an oft-flavor and ce @s s from new plumbing and parts. Throw the ice away. Also, take large amounts of ice from the ice bin, not through the dispenser. The water dispenser If you did not flush the water system when the refrigerator was first installed, press the water dispenser bar with a glass or jar until you draw and discard 2 to 3 gallons (8 to 12 liters) or approximately 6 to 7 minutes of water after water b
Summary of the content on the page No. 12
3. Take the new cartridge out of its packaging and remove protective cover from o-rings. The base grille water filter status light The water filter status light will help you know when to change your water filter cartridge. The light is located at the top of the 4. Slide the cartridge cap onto the new cartridge as shown refrigerator compartment. The light will change from green to above in Step 2. yellow, This tells you that it is almost time to change the water filter cartridge (90% of the filt
Summary of the content on the page No. 13
To turn the ice maker on/off: (Style 2) The ON/OFF switch is located on the top right side of the freezer compartment. o so_esoc(,,, A£,,essoy}_ 1. To turn the ice maker on, slide the control to the ON (left) To turn the ice maker on/off: (Style 1) position. The on/off switch for the ice maker is a wire shut-off arm located NOTE: Your ice maker has an automatic shut-off. The ice on the side of the ice maker. maker sensors will automatically stop ice production but the control will remain in the
Summary of the content on the page No. 14
3. Lower the front of the shelf and check to make sure that the shelf is securely in position. REFRIGERATOR FEATURES Your model may have some or all of these features. Features that can be purchased separately as product accessories are labeled with the word "Accessory." Not all accessories will fit all models. If you are interested in purchasing one of the accessories, please call the toll-free number on the cover or in the "Assistance or ;ervice" section. To slide the shelf from side to side:
Summary of the content on the page No. 15
1o To raise the shelf, pull forward on the lever located at the bottom front of the shelf and lift until the shelf locks into the To remove and replace the crisper and convertible vegetable vertical position. meat drawers: 2. To lower the shelf, lower the shelf until it is latched securely 1. Slide crisper or meat drawer straight out to the stop. Lift the in place. front of drawer with one hand while supporting the bottom of drawer with other hand and slide the drawer out the rest of the way. 2.
Summary of the content on the page No. 16
C _ _ _¢_/_/_ _ _/_ IM_; _ __s_ _ O_'_ 50_@ S_O<,@S, A,CO@_;sOI} _} The convertible vegetable/meat drawer can be adjusted to Depending on your model, you may have a one, two or three properly chill meats or vegetables. The air inside the pan is piece bin. Eggs may be stored in the egg tray or loose in the bin. cooled to prevent "spot" freezing and can be set to keep meats NOTE: Store eggs in a covered container for long term at the National Livestock and Meat Board recommended storage storage. I
Summary of the content on the page No. 17
Frozen food storage guide Drop-in Door Rails Storage times will vary according to the quality and type of food, To remove and replace the rails: the type of packaging or wrap used (should be airtight and 1. Remove the rails by pulling straight up on each end of the rail. moisture-proof), and the storage temperature. Ice crystals inside 2. Replace the rails by sliding the shelf rail into the slots on the a sealed package are normal. This simply means that moisture in door and pushing the rail str
Summary of the content on the page No. 18
Style 2 - Condenser coils in back of the refrigerator: • Pull refrigerator out away from the wall (see the CARING FOR YOUR "Unpacking Your Refrigerator" section). • Vacuum coils when they are dusty or dirty. REFRIGERATOR • Roll refrigerator back into place. Make sure to leave 1 in. (2.5 cm) between the cabinet back and the wall. • Check to see if the refrigerator is level. 6. Plug in refrigerator or reconnect power. NOTE: Not all appliance bulbs will fit your refrigerator. Be sure to replace the
Summary of the content on the page No. 19
Upper Freezer Light (on some models) • Remove the light shield by grasping the sides and squeezing in towards the center and while pulling forward the shield. Vacations • Replace the light shield by fitting the tabs into the slotted If you choose to leave the refrigerator on while you're away, holes in the freezer liner. Push in the shield until it snaps into use these steps to prepare your refrigerator before you leave. place. 1. Use up any perishables and freeze other items. 2. If your refrige
Summary of the content on the page No. 20
Are the doors not closed completely? Push the doors firmly shut. Ifthey will not shut all the way, see TROUBLESHOOTING "The doors will not close completely" later in this section. Are the condenser coils dirty? This prevents air transfer and makes the motor work harder. Try the solutions suggested here first in order to avoid the Clean the condenser coils. Refer to the "Cleaning Your cost of an unnecessary service call. Refrigerator" section. Your refrigerator will not operate Are the door gaske
