Summary of the content on the page No. 1
SANTO 3350-7 KA
Upright Refrigerator
Operating Instructions
818 19 99-00/7
Summary of the content on the page No. 2
Dear customer, Before placing your new refrigerator into operation please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance. Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance. Notes which are important for your safety or for the proper function- 1 ing of the appliance are stressed with a warning triangle and/or with signal words (Warning
Summary of the content on the page No. 3
Contents Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Environmental Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Old Appliances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Appliance Transport . . . . . . . . . . . . .
Summary of the content on the page No. 4
Contents Proper Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Hints and Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Normal Operating Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Food Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Energy Saving Advice . . . . . .
Summary of the content on the page No. 5
1 Important Safety Instructions These warnings are provided in the interests of your safety. Ensure that you understand them all before installing or using this appliance. Your safety is of paramount importance. If you are unsure about any of the meanings of these warnings contact the Customer Care Department. Prior to Installation • Check the refrigerator for transport damage. Under no circumstances should a damaged appliance be installed! In the event of damage, please contact your retai
Summary of the content on the page No. 6
Important Safety Instructions Child Safety Do not allow children to tamper with the controls or play with the product. Keep packaging material away from children! (There is a risk of suffocation!) During Use This appliance is designed for domestic use only, specifically for the storage of edible foodstuffs only. It is not intended for commercial or industrial use. Containers with flammable gases or liquids can leak at low temperatures. Do not store any containers with flammable ma
Summary of the content on the page No. 7
Environmental Information Packaging All transit packaging materials are environmentally compatible and can be reused. Wood is un-treated. The plastics can be recycled and are identified as follows: >PE< for polyethylene, e.g. the outer covering and the bags in the interior. >PS< for polystyrene foam, e.g. the pads, which are pure hydrocarbon compounds and can be recycled. The carton parts are made from recycled paper. Please dispose of the packaging with due care for the environment. Old A
Summary of the content on the page No. 8
Appliance Transport Two persons are required for transport of the appliance. There are two recessed handles at the front of the base and at the back of the appliance at the top for improved gripping. 0 1. Grip the appliance with the recessed handles positioned as in the draw- ing, and transport the appliance. 2. In order to push the appliance into its final position, press carefully at the top of the door and tip the appliance back slightly. The weight is then transferred to the back wheels
Summary of the content on the page No. 9
Before Use 2. Remove the transport protection pieces and pull off the adhesive tape. 3. Wash the inside of the appliance with lukewarm water with a little bicarbonate of soda added (5 ml to 0.5 litre of water). Do not use soap or detergent as the smell may linger. Dry the appliance thoroughly. Remove the transport fittings from the storage shelves: 4. Slide the fittings securing the shelf forward to the thicker section on the edge of the storage shelf. 5. Slide the storage shelf far enough
Summary of the content on the page No. 10
Installation Installation Location The appliance should be installed in a well ventilated, dry room. Energy use is affected by the ambient temperature. The appliance should therefore – not be exposed to direct sunlight; – not be installed next to radiators, cookers or other sources of heat; – only be installed at a location whose ambient temperature corresponds to the climate classification, for which the appliance is designed. The climate classification can be found on the rating plate, which
Summary of the content on the page No. 11
Installation The Refrigerator needs Ventilation Air is fed under the door through the vent slots in the base and is exhausted upwards along the back wall. To ensure proper air circulation never cover or alter the vent openings. Important! If the appliance is installed under a hanging cabinet, a clearance of at least 10 cm between the top of the appliance and the cabinet above it must be maintained. Please check whether, after installing your appliance and especially after reversing th
Summary of the content on the page No. 12
Installation Electrical Connection Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. WARNING – THIS APPLIANCE MUST BE EARTHED 1 The manufacturer declines any liability should these safety measures not be observed. Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance rating plate. The rating plate is inside, on the left. The appliance is supplied with a 13 amp plu
Summary of the content on the page No. 13
Reversing the Door The door hinges can be changed from right (as supplied) to left if required to suit the location where the appliance is installed. Warning! Unplug from the mains before reversing the door. 1 0 1. Open the door and remove the plinth cover to the front. Move the door bearing cover on the plinth cover from the left to the right. Close the door. 2. With the door closed, remove the cross-head screws from the lower door bearing and remove the door bearing downwards. 3. R
Summary of the content on the page No. 14
Reversing the Door 4. Remove the door fitting on the lower right (1) and reposition the door bearing cover from the lower left to the right of the door (2), place the door fitting supplied in the lower left of the door (3). Carefully remove the door to the front and place on one side. 5. Move the upper bearing pivot to the left. 6. Carefully slide the door onto the top bearing pivot and close. 7. Place the lower door bearing with the bearing pivot in the lower left of the door and f
Summary of the content on the page No. 15
Description of the Appliance View of the appliance ➀ Control panel ➁ Butter and cheese compartment with lid ➂ Door storage compartments ➃ Bottle compartment ➄ Salad bin ➅ Shelves ➆ Rating plate 818 19 99-00/7 15
Summary of the content on the page No. 16
Description of the Appliance Control Panel 1 ON/OFF indicator light (green) 2 ON/OFF button 3 Temperature display 4 Buttons for adjusting the temperature 5 FAST CHILL indicator light (yellow) FAST CHILL for intensive cooling in the refrigerator 6 FAST CHILL button Buttons for Adjusting the Temperature The temperature is adjusted using the „+“ (WARMER) and „-“ (COLDER) buttons. These buttons are connected to the temperature display. The temperature display is switched over fr
Summary of the content on the page No. 17
Temperature Display The temperature display can indicate several pieces of information. During normal operation, the temperature currently present in the refrigerator (ACTUAL temperature) is displayed, the corresponding light illuminates. If the temperature in the refrigerator is warmer than the display range of the temperature display, all the lights in the temperature display are extinguished. If the temperature in the refrigerator is colder than the display range of the temperatu
Summary of the content on the page No. 18
Temperature Adjustment With the „+“ and „-“ buttons the desired temperatures in the refrigerator can be adjusted. 0 1. Press either the „+“ (WARMER) or „-“ (COLDER) button. The temperature display switches over and the DESIRED temperature currently set flashes on the temperature display. 2. To adjust to a warmer temperature, press the „+“ (WARMER) button. To adjust to a colder temperature, press the „-“ (COLDER) button. The changed setting is immediately displayed on the temperature display.
Summary of the content on the page No. 19
Switching the Appliance off 0 1. To switch off, press the ON/OFF button until the mains power light extinguishes. Note: The appliance cannot be switched on or off if unplugged, or if there is no power being supplied to it. Following connection to the mains power supply, the appliance returns to the same operating state as before the interruption of main power. If the appliance is to be removed from service for a lengthy period: 0 1. Switch off the appliance, to do this press the ON/OFF button
Summary of the content on the page No. 20
Interior Fittings Storage Shelves 0 1. A storage shelf must be inserted into the lower guide track above the salad bin. It must always remain in this position, so that fruits and veg- etables remain fresh longer. The remaining storage shelves can be adjusted to various heights: 0 1. Pull the storage shelf forward until it can be tipped up or down and removed. 2. To insert at a different height use the same procedure in reverse. Salad Bin The salad bin can be divided into sections by insert
