Summary of the content on the page No. 1
CD-RECEIVER
KDC-V7090R
INSTRUCTION MANUAL
KDC-7090R
COMPACT
DIGITAL AUDIO
B64-1902-00 (EN)
Summary of the content on the page No. 2
Contents Safety precautions..........................3 CD/External disc control features Basic Operations of remote control...36 Playing CDs....................................................22 Handling Compact discs .................6 Installtion Playing Other Disc mode ...............................22 Accessories....................................................39 General features Switching Display for Discs ...........................22 Installation Procedure..............................
Summary of the content on the page No. 3
Safety precautions IMPORTANT INFORMATION 2WARNING 2CAUTION About the disc changer to be To prevent injury and/or fire, take the To prevent damage to the machine, connected: following precautions: take the following precautions: To connect a disc changer having the "O-N" • Insert the unit all the way until it is fully • Make sure to ground the unit to a negative switch to this unit, set the "O-N" switch to locked in place. Otherwise it may fly out of 12V DC power supply. "N". place during collis
Summary of the content on the page No. 4
Safety precautions • The illustrations of the display and the panel Mask key NOTE appearing in this manual are examples used If you have transmitted the Mask Key's to explain more clearly how the controls are • If you experience problems during signal once to the unit in advance, you will used. Therefore, what appears on the display installation, consult your Kenwood dealer. have to transmit it once again if the unit has in the illustrations may differ from what been removed from the battery. T
Summary of the content on the page No. 5
Cleaning the Faceplate Terminals The marking of products using lasers If the terminals on the unit or faceplate get (Except for some areas) dirty, wipe them with a dry, soft cloth. CLASS 1 Cleaning the Unit LASER PRODUCT If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth. The label is attached to the chassis/case and If the faceplate is stained badly, wipe the says that the component uses laser beams stain off with a cloth moistened with neutral that
Summary of the content on the page No. 6
Handling Compact discs Playing a CD that is dirty, scratched Storing CDs Checking New CDs for Burrs or warped can cause the sound to • Do not store CDs in areas exposed to direct When playing a new CD for the first time, sunlight – such as a car seat or above the check that there are not any burrs stuck to skip and the unit to operate fascia panel (dashboard) – or other hot the perimeter of the disc or in the central incorrectly, resulting in worsened places. hole. CDs with burrs stuck on them m
Summary of the content on the page No. 7
Do Not Load CD Accessories in Slot Do Not Use Special Shape CDs Do Not Use CDs with Sticker on the Do not use commercially available CD • Be sure to use round shape CDs only for Labelled Side accessories that can be loaded into the CD this unit and do not use any special shape Do not use the CD with the label sticker slot, such as stabilisers, protective sheets, CDs. Use of special shape CDs may cause stuck on it. or CD cleaning discs, since they can cause the unit to malfunction. Using such a C
Summary of the content on the page No. 8
General features Power Q SRC CLK You can help prevent theft of the unit by reversing the faceplate so that the control panel cannot be seen, hiding the unit, and shutting off the audio. Power ON/OFF: When you turn your vehicle’s ignition on, the unit’s power will also turn on, with the faceplate reversing to show the control panel. When you turn your vehicle's ignition off, the faceplate will reverse to hide the control panel after a period of time which you have set in the "Time setting for rem
Summary of the content on the page No. 9
Pressing 4 or ¢ button during this mode allows you to select "AUX" , "TV" , "VCP" , "GAME" or "PORTABLE" in the AUX mode. Tuner mode The AUX-name selection mode can be exited by pressing the DISP button or doing nothing for 10 seconds. CD mode External disc control mode 1 External disc control mode 2 / AUX mode Standby mode Volume Increasing Volume: Selecting the standby mode: Press the button to turn up the volume. Press the SRC button repeatedly to select to "ALL OFF" . When "ALL OFF" is disp
Summary of the content on the page No. 10
General features Loudness Speaker Setting This function amplifies low and high tones when the volume is This function allows you to adjust the setting that is recalled turned down. with the System Q, according to types of speakers. The LOUD indicator lights up, when the loudness function is 1 Press the SRC button repeatedly to select the standby mode. on. "ALL OFF" is displayed when the standby mode is selected. Turning Loudness On/Off: 2 Press the Q button to enter the speaker setting mode. Hol
Summary of the content on the page No. 11
The original source (i.e., the one used before the phone call) is NOTE returned to automatically, and the volume restored gradually. • When the closing faceplate is hit by an object, the unit will turn off without the faceplate closing all the way. Remove the object and press the SRC button to turn the unit back on, then turn it off again to make it close properly. • Do not try to press the buttons on the control panel as the Faceplate Angle Adjustment faceplate is moving, as excessive force may
Summary of the content on the page No. 12
General features Reattaching the Faceplate: Removing the Faceplate 1 Hold the faceplate so that the control panel faces the front The faceplate can be detached from the unit, helping to deter toward you and set the left side of the faceplate in the theft. faceplate bracket. Removing the faceplate: 2CAUTION 1 Choose the way from among the following and open the Do not set the right side of the faceplate in the faceplate bracket faceplate. first, when reattaching the faceplate. Doing so may cause
Summary of the content on the page No. 13
Audio control features AUD Audio Control Setting Adjust various parameters of sound quality. 1 Hold down the AUD button for one second or more to enter the control mode. 2 Selecting mode Press either the FM or AM button. Each time the button is pressed, the adjustment mode will change. Please refer to the following for the contents of the adjustment modes. 4 AM ¢
FM NOTE Source tone memory Each source (CD, FM, AM, and disc changer) has its own memory in which to store the bass, middle, and treb
Summary of the content on the page No. 14
Audio control features Display and setting: Bass Centre Frequency "MID FRQ"/"MID F" : 0.5 / 1.0 / 1.5 / 2.0 kHz Adjust the centre frequency of the bass. Display and setting: "Bass FRQ"/"Bass F" : 60 / 70 / 80 / 100 (Only when the bass quality factor is set to 1.00, 1.25 or 1.50) Middle Level / 150 (Only when the bass quality factor Adjust the middle level. is set to 2.00) Hz. Display and setting: "MID"/"Middle" : - 8 – + 8 Bass Level Adjust the bass level. Display and setting: Middle Quality F
Summary of the content on the page No. 15
Tuner features FM SRC Balance Level Adjust the balance level. Display and setting: "Balance" : Left 15 – Right 15 Fader Level Adjust the fader level. Display and setting: 4 #1 – 6 DISP / AM ¢
NAME.S "Fader" : Rear 15 – Front 15 KDC-V7090R Band display Frequency Preset station number Volume Offset Set the sound level of the each source selected by adjusting the level difference between the basic sound level and the required level. Display and setting: "VOL Offset"/"V Offset" : - 8 – ± 0 ST
Summary of the content on the page No. 16
Tuner features Tuning 1 Select the band by pressing the FM or AM button. 2 Press the DIRECT button. 1 Press the SRC button repeatedly until the tuner mode is "----" is displayed for 10 seconds. obtained. "TUNER" is displayed only when the tuner mode is If you make no input in the 10-second period, direct access selected. tuning is automatically cancelled. 2 Press either the FM or AM button to select the band. 3 Enter the frequency of the desired station. Each time you press the FM button, the ba
Summary of the content on the page No. 17
RDS features Switching Display for Tuner FM PTY You can change the display used when listening to the radio. Switching the Display: Each time you press the DISP button, the display changes as follows: Programme Service name (only during RDS station reception)/ Station frequency Radio text (only during RDS station reception) 4 #1 – 6 TI/VOL ADJ DISP AM ¢
Displaying Frequencies during programme service name display: Hold down the DISP button for one second or more. KDC-V7090R The frequency for th
Summary of the content on the page No. 18
RDS features RDS (Radio Data System) Traffic Information Function RDS is a digital information system that lets you receive You can listen to traffic information. If you are listening to signals besides those of regular radio programmes, such as tapes or discs, they will continue playing until a traffic bulletin network information being transmitted from radio stations. is broadcast. When listening to an RDS station (ie, a station with RDS Turning TI function On/Off: capability), the programme s
Summary of the content on the page No. 19
Please see the menu settings (page 35) about switching between Presetting Volume for Traffic Information/News manual scrolling and automatic scrolling. Preset the volume level to be used for traffic information and news broadcasts. 1 Tune into the station for which you want to set the volume. 2 Adjust the volume to the desired level. 3 Hold down the VOL ADJ button for two seconds or more. The volume level blinks once in the display to indicate that the data has been stored. Future traffic infor
Summary of the content on the page No. 20
RDS features 24. Jazz Music (Jazz) Programme Type (PTY) Function 25. Country Music (Country) Conduct auto seek tuning only on those stations with selected 26. National Music (Nation M) kinds of programmes. 27. Oldies Music (Oldies) 28. Folk Music (Folk M) 1 Press the PTY button. 29. Documentary (Document) "PTY" is displayed, and the Programme Type Selection (PTY) (Speech.....1~9,16~23, 29, Music.....10~15, 24~28) Mode entered. • You can select the type of programme directly by pressing a If you
