Summary of the content on the page No. 1
SANTO 86378-KG
SANTO 86378-KG1
Electronic Refrigerator/Freezer
Operating Instructions
818 36 55-00/3
Summary of the content on the page No. 2
Dear customer, Before placing your new refrigerator/freezer into operation please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance. Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance. Notes which are important for your safety or for the proper function- 1 ing of the appliance are stressed with a warning triangle and/or with signal words
Summary of the content on the page No. 3
Contents Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Environmental Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Appliance Transport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Packaging . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 4
Contents Control and Information Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Power cut warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 “Open door” warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Temperature warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Function Errors . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 5
1 Important Safety Instructions These warnings are provided in the interests of your safety. Ensure that you understand them all before installing or using this appliance. Your safety is of paramount importance. If you are unsure about any of the meanings of these warnings contact the Customer Care Department. Prior to Installation Check the refrigerator/freezer for transport damage. Under no circumstances should a damaged appliance be installed! In the event of damage, please contact yo
Summary of the content on the page No. 6
Important Safety Instructions If the refrigerant circuit should become damaged: – avoid open flames and sources of ignition; – thoroughly ventilate the room in which the appliance is situated. Child Safety Do not allow children to tamper with the controls or play with the product. Inform children of the possible dangers and instruct them in the correct use of the appliance. Keep packaging material away from children! (There is a risk of suffocation!) During Use This appliance is desi
Summary of the content on the page No. 7
Environmental Information Packaging All transit packaging materials are environmentally compatible and can be reused. Wood is un-treated. The plastics can be recycled and are identified as follows: >PE< for polyethylene, e.g. the outer covering and the bags in the interior. >PS< for polystyrene foam, e.g. the pads, which are pure hydrocarbon compounds and can be recycled. The carton parts are made from recycled paper. Please dispose of the packaging with due care for the environment. Old A
Summary of the content on the page No. 8
4. When the appliance is standing in the desired place, attach the plinth cover. Make sure that the door contact (if present) is not damaged and that it engages in the corresponding aperture in the plinth cover. Before Use Packaging 0 1. Remove all adhesive tape and packaging from the interior of the appli- ance. Any remnants of adhesive can be removed with white spirit. 3 2. Remove the transport protection pieces and pull off the adhesive tape. 3. Wash the inside of the appliance with lu
Summary of the content on the page No. 9
Remove the transport fittings from the storage shelves: 4. Slide the fittings securing the shelf forward to the thicker section on the edge of the storage shelf. 5. Take hold of the storage shelf at the back and together with the fit- tings slide the storage shelf far enough forward so that it can be hinged downwards and the fittings can be removed from the guides. Fitting the Door Handles To keep the amount of packaging down and to reduce the size for transporting, the door handles are
Summary of the content on the page No. 10
Installation Installation Location The appliance should be installed in a well ventilated, dry room. Energy use and efficient performance of the appliance is affected by the ambient temperature. The appliance should therefore – not be exposed to direct sunlight; – not be installed next to radiators, cookers or other sources of heat; – only be installed at a location whose ambient temperature corresponds to the climate classification, for which the appliance is designed. The climate classifica
Summary of the content on the page No. 11
Installation The refrigerator/freezer needs ventilation Air is fed under the door through the vent slots in the base and is exhausted upwards along the back wall. To ensure proper air circulation never cover or alter the vent openings. Important! If the appliance is installed under a hanging cabinet, a clearance of at least 10 cm between the top of the appliance and the cabinet above it must be maintained. Please check whether, after installing your appliance and especially after reve
Summary of the content on the page No. 12
Installation Electrical Connection Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. WARNING – THIS APPLIANCE MUST BE EARTHED 1 The manufacturer declines any liability should these safety measures not be observed. Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance rating plate. The rating plate is inside, on the left. The appliance is supplied with a 13 amp pl
Summary of the content on the page No. 13
Carbon filter There is a active carbon filter in the rear wall of the fridge section. The carbon filter cleans the air in the fridge section and in the LONGFRESH 0°C cold section by binding unpleasant smells. Tip: The active carbon filter is a part subject to wear and is not covered by the warranty. Inserting and changing the active carbon filter: When the fridge is delivered, the carbon filter is packed in a plastic bag to ensure a long life. Before using the appliance for the first time,
Summary of the content on the page No. 14
Appliance Description View of Appliance (various models) á Control panel à Butter and cheese compartment with lid â Door storage compartments ä Bottle compartment ã LONGFRESH 0 °C cold zone å Shelves ç Quick chill shelf é Bottle and can holder è Rating plate ê Air discharge grill with regulator ë Freezer drawer (only for storage). When defrosting the bottom drawer also serves as a water collecting vessel í Freezer drawer (for storage and freezing) ì Freezer tray 14 818 36 55-00/3
Summary of the content on the page No. 15
Appliance Description Freezer tray In the freezer section there is a freezer tray in the second drawer from the top. It can be used in both the top drawer and the second drawer from the top. Berries and vegetables, for example, can be pre-frozen on the freezer tray. Advantage: The berries are not squeezed and maintain their natural form. The frozen berries can then be stored in compartments or drawers packaged in individual portions. Cold Accumulation Block A cold accumulation block is
Summary of the content on the page No. 16
Appliance Description Control panel 1 ON/OFF button 2 Fridge section indicator 3 Temperature indicator for fridge section (not for LONGFRESH 0 °C cold section) 4 Buttons for setting temperature for fridge section 5 Thermometer indicator for fridge section (with COOLMATIC) 6 MODE button for setting the operating mode 7 Text display 8 RESET button 9 Freezer section indicator 10 Temperature indicator for freezer section 11 Buttons for setting temperature for freezer section
Summary of the content on the page No. 17
Appliance Description ACTUAL temperature means: The temperature display indicates the current temperature inside the fridge or the freezer compartment. The ACTUAL temperature is indi- cated with static illuminated numbers. Once the COOLMATIC- or the FROSTMATIC function has been switched 3 on the DESIRED temperature that was set originally for the fridge or the freezer cannot be changed. Temperature Displays The temperature displays shows several types of information. In normal operation
Summary of the content on the page No. 18
Appliance Description MODE button Different operating modes can be set using the MODE button. The following operating modes can be selected: – SHOPPING: Fridge temperature value 3 °C for 6 hours, cooling for freezer section runs for 1 hour in continuous operation. – FROSTMATIC: Cooling for the freezer section runs for 52 hours in continuous operation. – COOLMATIC: Fridge temperature value 3 °C for 6 hours. – FROSTMATIC and COOLMATIC: Cooling for freezer section runs for 52 hours in conti
Summary of the content on the page No. 19
Prior to Initial Start-Up Before connecting the appliance to the mains and putting it into ope- 1 ration for the first time, leave the appliance to stand for 30 minutes if was transported upright. After transport on its side, the appliance must be left to stand for 2 hours before putting it into operation. This is necessary to allow the oil to flow back into the compressor. Otherwise the compressor may be damaged. 0 1. Please clean the appliance interior and all accessories prior to initial
Summary of the content on the page No. 20
Initial Start-Up 0 1. Insert plug into mains socket. 2. Press and hold down the ON/OFF button. The temperature indicator and the back lighting light up, the appliance starts up. An alarm sounds, TEMPERATURE appears in the display and the back lighting flashes in red. 3. Switch off alarm and red back lighting using RESET button. The TEMPERATURE indicator goes out, if the temperature in the appliance has gone below the warning temperature. Temperature settings set in the factory: +5 °C for t
