Summary of the content on the page No. 1
Multi
Music Scan
KS-FX650R
KS-F550R
CASSETTE RECEIVER
CASSETTEN-RECEIVER
RADIOCASSETTE
RADIO/CASSETTESPELER
KS-FX650R/KS-F550R
KS-FX650R
40Wx4
CD CHANGER CONTROL
MO
RND
SSM
TP RDS
RPT
DAB
PTY
SCM FM/AM TAPE
eb?
KS-F550R
40Wx4
DETACHABLE CONTROL PANEL
MO
SSM
TP RDS
RPT
PTY
SCM AM FM TAPE
ement?
appareil
g?
For installation and connections, refer to the separate manual.
Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch.
en Pour l’installation et les raccordements, se réf
Summary of the content on the page No. 2
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS BASIC OPERATIONS.................................................... 4 RADIO BASIC OPERATIONS......................................... 5 Listening to the radio ..................................................................... 5 Storing stations in memory ......................................
Summary of the content on the page No. 3
OTHER MAIN FUNCTIONS .......................................... 25 Setting the clock ............................................................................ 25 Changing the general settings ...................................................... 26 Basic Procedure ........................................................................ 26 Canceling Advanced SCM ......................................................... 27 Selecting 24-hour or 12-hour clock ....................................
Summary of the content on the page No. 4
BASIC OPERATIONS Note: 1 When you use this unit for the first time, set the built-in clock 3 (see page 25). 2 1 Turn on the power. Note on One-Touch Operation: When you select a source in step 2 below, the power automatically turns on. You do not have to press this button to turn on the power. KS-FX650R DAB 2 Select the source. TAPE FM/AM To operate the tuner, see pages 5 – 16. To operate the tape deck, see pages 17 – 20. KS-F550R For KS-FX650R TAPE FM AM To operate the CD changer, see pages 31
Summary of the content on the page No. 5
RADIO BASIC OPERATIONS Listening to the radio KS-FX650R KS-F550R 2 2 1 1 KS-FX650R 1 FM1 FM2 FM3 AM FM/AM Select the band (FM1,FM2, FM3 KS-F550R FM1 FM2 FM3 or AM) you want. FM You can select any one of FM1, FM2, and FM3 to listen to an FM station. AM AM Audio (see page 28) or Selected band volume level indicator appears 2 To search stations of higher frequencies. SSM To search stations of Start searching a station. lower frequencies. When a station is received, searching stops. To stop searchin
Summary of the content on the page No. 6
Storing stations in memory You can use one of the following two methods to store broadcasting stations in memory. • Automatic preset of FM stations: SSM (Strong-station Sequential Memory) • Manual preset of both FM and AM stations FM station automatic preset: SSM You can preset up to 6 local FM stations in each FM band (FM1, FM2, and FM3). 2 1 1 KS-F550R KS-FX650R FM1 FM2 FM3 FM1 FM2 FM3 AM FM FM/AM Select the FM band number (FM1, FM2 or FM3) you want to store FM stations into. 2 Press and hold
Summary of the content on the page No. 7
Manual preset You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually. EXAMPLE: Storing an FM station of 88.3 MHz into preset number 1 of the FM1 band 2 3 1 1 KS-FX650R KS-F550R Select the FM1 band. FM/AM FM 2 Tune into a station of 88.3 MHz. SSM See page 5 to tune into a station. 3 Press and hold the button for more than 2 seconds. “P1” flashes for a few seconds. 4 Repeat the above procedure to store other stations into other preset numbers. Notes: • A previously preset sta
Summary of the content on the page No. 8
Tuning into a preset station You can easily tune into a preset station. To do this, you must store stations first. If you have not stored them yet, see pages 6 and 7. KS-FX650R KS-F550R MO RND MO 1 2 1 KS-FX650R 1 FM/AM FM1 FM2 FM3 AM KS-F550R FM FM3 FM1 FM2 AM AM Select the band (FM1, FM2, FM3 or AM) you want. 2 Select the number (1 – 6) for the preset station you want. When an FM stereo broadcast is hard to receive: Press MO RND (mono/random: for KS-FX650R) or MO (mono: for KS-F550R) while lis
Summary of the content on the page No. 9
RDS OPERATIONS What you can do with RDS EON RDS (Radio Data System) allows FM stations to send an additional signal along with their regular programme signals. For example, the stations send their station names, as well as information about what type of programme they broadcast, such as sports or music, etc. Another advantage of RDS function is called “EON (Enhanced Other Networks).” The EON indicator lights up while receiving an FM station with the EON data. By using the EON data sent from a st
Summary of the content on the page No. 10
Mode 1 The AF indicator lights up but the REG indicator does not. Network-Tracking is activated with Regionalization set to “off.” Switches to another station within the same network when the receiving signals from the current station become weak. Note: In this mode, the programme may differ from the one currently received. Mode 2 Both the AF indicator and the REG indicator light up. Network-Tracking is activated with Regionalization set to “on.” Switches to another station, within the same netw
Summary of the content on the page No. 11
Using Standby Reception Standby Reception allows the unit to switch temporarily to your favorite programme (PTY: Programme Type) and Traffic Announcement (TA) from the current source (another FM station and TAPE (or CD Changer and other connected components for KS-FX650R)). Note: Standby Reception will not work if you are listening to an AM station. TA Standby Reception • When you press TP/RDS while listening to an FM station, the TP indicator TP RDS is lit during reception of a TP (Traffic Prog
Summary of the content on the page No. 12
Selecting Your Favorite Programme for PTY Standby Reception You can select your favorite programme for PTY Standby Reception to store in memory. When shipped from the factory, “NEWS” is stored as the programme type for PTY Standby Reception. 3 1, 4 2 1 Press and hold SEL (Select) for more than 2 seconds to enter the general settings mode (see page 26). 2 Select “PTY STBY (Standby)” if not shown on SSM the display. 3 Select one of twenty-nine PTY codes. (See the table on page 15.) Selected code n
Summary of the content on the page No. 13
To store your favorite programme types 3 1,54 2 1 Press and hold SEL (Select) for more than 2 seconds to enter the general settings mode (see page 26). 2 SSM Select “PTY SRCH (Search)” if not shown on the display. 3 Select one of twenty-nine PTY codes. (See the table on page 15.) Selected code name appears on the display. • If the code already stored in memory is selected, it will flash on the display. 4 Press and hold the number button for more than 2 seconds to store the PTY code selected into
Summary of the content on the page No. 14
To search your favorite programme type 1 2 1 PTY Press and hold PTY (Programme Type) for more than 1 second while listening to an FM station. The last selected PTY code appears. 2 Select one of the PTY codes stored in the preset number buttons (1 – 6). Ex. When “ROCK M” is stored in the preset number button 2 PTY search for your favorite programme starts after 5 seconds. • If there is a station broadcasting a programme of the same PTY code you selected, that station is tuned in. • If there is no
Summary of the content on the page No. 15
Other convenient RDS functions and adjustments Automatic selection of the station when using the number buttons Usually when you press the number button, the preset station is tuned in. However, when the preset station is an RDS station, something different will happen. If the signals from that preset station are not sufficient for good reception, this unit, using the AF data, tunes in another frequency broadcasting the same programme as the original preset station is broadcasting. In case no ot
Summary of the content on the page No. 16
Changing the display mode while listening to an FM station You can change the initial indication on the display to station frequency, station name (PS NAME), station frequency (FREQ) or clock time while listening to an FM RDS station. • See also “Changing the general settings” on page 26. 1. Press and hold SEL (select) for more than 2 seconds to call up the general settings mode. 2. Select “DISPMODE” with ¢ or 4. 3. Use the control dial to select the desired indication from the following: PS N
Summary of the content on the page No. 17
Multi Music Scan TAPE OPERATIONS Listening to a tape 1 2 1 Insert a cassette. The unit turns on and tape play starts automatically. When one side of the tape reaches its end during play, the other side of the tape automatically starts playing. (Auto Reverse) Note on One-Touch Operation: When a cassette is already in the cassette compartment, pressing TAPE 2 3 turns on the unit and starts tape play automatically. 2 Select the tape direction. TAPE Each time you press the button, the tape direction
Summary of the content on the page No. 18
To fast-forward and rewind a tape • Press ¢ for more than 1 second to fast-forward the tape. When the tape reaches its end, the tape is reversed and playback starts from the beginning of the other side. • Press 4 for more than 1 second to rewind the tape. When the tape reaches its end, playback of the same side starts. Tape direction To stop fast-forward and rewind at any position on the tape, press TAPE 2 3 . Tape play starts from that position on the tape. 18 EN.17-19KS-FX650R/550R[E] 18 00.
Summary of the content on the page No. 19
Finding the beginning of a tune Multi Music Scan allows you to automatically start playback from the beginning of a specified tune. You can specify up to 9 tunes ahead of or before the current tune. ¢ 4 During playback To locate a tune Specify how many tunes ahead of or ahead of the current before the current tune the tune you tune on the tape. SSM want is located. To locate a tune before the current tune on the tape. Each time you set the tune, the number changes up to ±9. When the beginning
Summary of the content on the page No. 20
Other convenient tape functions RPT TAPE 2 3 Prohibiting cassette ejection You can prohibit the cassette ejection and can “lock” a cassette in the cassette compartment. Press and hold TAPE 23 and 0 for more than 2 seconds. “NO EJECT” flashes on the display for about 5 seconds, and the cassette is “locked”. To cancel the prohibition and “unlock” the cassette, press and hold TAPE 23 and 0 for more than 2 seconds again. “EJECT OK” flashes again for about 5 seconds, and this time the cassette is “un
