Summary of the content on the page No. 1
AD-52 Aquatex
Parts Manual
1995 thru 2000
American Dryer Corporation
88 Currant Road
Fall River, MA 02720-4781
Telephone: (508) 678-9000 / Fax: (508) 678-9447
e-mail: techsupport@amdry.com
012100/DX/pb ADC Part No. 450196
Summary of the content on the page No. 2
Retain This Manual In A Safe Place For Future Reference American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble-free operation. ONLY qualified technicians should service this equipment. OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation/operator's manual included with the dryer. The following FOR YOUR SAFETY caution
Summary of the content on the page No. 3
Table of Contents HIGH SECURITY CONTROL DOOR ASSEMBLY ............................................................................................... 2 MICROPROCESSOR CONTROL PANEL ASSEMBLY ........................................................................................... 3 MAIN DOOR ASSEMBLY............................................................................................................................. 4 MAIN DOOR SWITCH .....................................................
Summary of the content on the page No. 4
High Security Control Door Assembly 2 Illus. No. Part No. Qty. Description 1 160017 1 Special Dummy Lock ONLY 2 160016 1 Lock Cam ONLY 3 112352 1 Logo ONLY 4 881349* 1 Control Door Assembly Less Lock (includes illus. nos. 4 through 7) 881350* 1 Stainless Steel Control Door Assembly Less Lock (includes illus. nos. 4 through 7) 5 180201 1 Top Trim Strip with Lock Hole 6 117603 3 Noise Suppressor Tape (sold by the foot) 7 150201 5 #10-32 x 1/4" Phillips Round Head Machine Screw 8 150300 4 #10 x 1/2
Summary of the content on the page No. 5
Microprocessor Control Panel Assembly 3 Illus. No. Part No. Qty. Description 1 112535 1 OPL English Keyboard Label Assembly 2 801255 1 Phase 5 Microprocessor Control Panel ONLY 881319 1 Microprocessor Control Panel Assembly Complete (includes illus. nos. 1 through 6) 3 137108 1 Phase 5 Microprocessor Controller (computer) 4 153010 2 # 6 Star Washer 5 150005 2 # 6-32 x 1/4" Phillips Round Head Machine Screw 6 150309 1 # 10-16 x 1/2" Phillips Hex Head TEK Crimptite Screw Telephone: (508) 678-9000
Summary of the content on the page No. 6
Main Door Assembly 4 Illus. No. Part No. Qty. Description 1 881421 1 Gray Plastic Main Door Assembly Complete with Mechanical Fasteners (includes illus. nos. 1 and 5 through 9) 2 800448 4 12-1/2" Stainless Steel Main Door Hinge Assembly 3 150410 4 #10-24 x 3/8" Phillips Pan Head Taptite Screw 4 152014 1 1/4-20 Free Spin Wash Nut 5 102349 1 Main Door Gasket 6 102212 1 20-7/16" Door Glass with (4) Holes 170730 1 Main Door Glass Adhesive (10.3 oz. cartridge) 7 150448 4 1/2" Stainless Steel Flat Hea
Summary of the content on the page No. 7
Main Door Switch Assembly 5 Illus. No. Part No. Qty. Description 1 152013 2 #6-32 Hex Nut 2 153008 2 #6 Lock Washer 3 137005 1 Single Pole Door Switch 4 121028 2 Insulated Female Terminal 5 154281 2 3/8" Standard Nylon Spacer 6 800448 1 12-1/2" Stainless Steel Main Door Hinge Assembly (includes illus. nos. 6 and 7) 7 153565 2 #6 Stud 8 313218 1 Main Door Switch Housing 9 150201 2 #10-32 x 1/4" Phillips Pan Head Screw 10 121405 1 Rubber Grommet Telephone: (508) 678-9000
Summary of the content on the page No. 8
Front Panel Assembly 6 Illus. No. Part No. Qty. Description 1 881328* 1 Left Hand Front Panel (includes illus. nos. 1 through 3 and 5) 881329* 1 Stainless Steel Left Hand Front Panel (includes illus. nos. 1 through 3 and 5) 2 154215 2 5/32" Pop Rivet 3 170330 1 Friction Door Latch 4 150309 8 #10-16 x 1/2" Phillips Round Head Crimptite Screw 5 121405 1 Rubber Grommet 6 122351 1 "EMERGENCY STOP" (E-Stop) Twist and Lock Operator 7 122419 1 "EMERGENCY STOP" (E-Stop) Label 8 132395 1 Normally Closed
Summary of the content on the page No. 9
Basket (Tumbler)/Support Assemblies 7 Illus. No. Part No. Qty. Description 1* 800838 1 Galvanized Basket (Tumbler) ONLY (without felt collar) 800837** 1 Non-Reversing Galvanized Basket (Tumbler) and Support Assembly with Tapered Ribs (includes illus. nos. 1 through 10) 2 150309 40 #10-16 x 1/2" Phillips Round Hex Head TEK Crimptite Screw 3 301302 2 Basket (Tumbler) Rib ONLY (Low Rib) 301311 2 Tapered Basket (Tumbler) Baffle Rib ONLY (High Rib) 4 150500 1 5/16-18 x 3/4" Socket Button Head Screw 5
Summary of the content on the page No. 10
Drop Lint Door Assembly 8 Illus. No. Part No. Qty. Description 1 800150 1 Knob Latch Kit Assembly 160200 1 Knob Latch ONLY with Two (2) Screws 160003 1 Dummy Lock Only 2 160008 1 Lock Cam For Dummy Lock 160009 1 Knob Latch Adjustable Cam 150425 1 #12-24 x 3/8" Round Head Machine Screw (for Knob Latch Adjustable Cam) 3 157000 1 Drop Lint Door Spring 4 881351 1 Drop Lint Door Assembly (includes illus. nos. 4 through 8) 881353 1 Insulated Drop Lint Door Assembly (includes illus. nos. 4 through 8) 8
Summary of the content on the page No. 11
Lint Trap Assembly 9 Illus. No. Part No. Qty. Description 1 800402 1 Lint Trap Assembly Complete (includes illus. nos. 1, 3, 4, and 5) 800404 1 Lint Trap Only 2 154200 7 5/32" Pop Rivet 3 304101 1 Lint Screen Holder ONLY 4 150300 2 #10 x 1/2" Hex Washer TEK Screw 5 800501 1 Lint Screen Holder ONLY 6 150419 2 #6 x 1/2" Tamper Proof TEK Screw 7 108120 1 Chain for Drop Lint Door 150418 1 Tamper Proof Screw Hand Driver Telephone: (508) 678-9000
Summary of the content on the page No. 12
Tumbler Bearing Assembly 10 American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Summary of the content on the page No. 13
Tumbler Bearing Assembly 11 Illus. No. Part No. Qty. Description 1 880220 1 1-3/4" Flange Bearing with Nylock Set Screw 2 153025 4 9/16" Lock Washer 3 152050 4 9/16-12 Hex Nut 4 150508 2 3/8-16 x 3/4" Hex Head Machine Bolt 5 153005 2 3/8" Lock Washer 6 152005 2 3/8-16 Hex Nut 7 150600 2 3/8-16 x 1-1/2" Hex Head Machine Bolt 8 153004 * 3/8" Flat Washer 9 153005 2 3/8" Lock Washer 10 152005 2 3/8-16 Hex Nut 11 150501 4 5/16-18 x 3/4" Hex Head Machine Bolt 12 153002 4 5/16" Lock Washer 13 153001 4
Summary of the content on the page No. 14
Idler Bearing Assembly 12 Illus. No. Part No. Qty. Description 1 100108 1 5L-680 V-Belt (basket/tumbler to idler) 2 101129 1 9" x 2-1/2" Compound Pulley 3 100110 1 4L-500 V-Belt (for 60 Hz models Only) 100103 1 4L-510 V-Belt (idler to motor) For 50 Hz Models ONLY 4 154301 2 5/16-18 x 5/16" Allen Set Screw 5 100705 1 3/16" x 3/16" x 1-3/8" Key 6 301850 1 5/8" x 3/4" Idler Shaft 7 150529 3 1/4-20 x 2-1/4" Carriage Bolt 8 100214 2 5/8" Flange Bearing 9 153007 3 1/4" Lock Washer 10 152002 3 1/4-20 H
Summary of the content on the page No. 15
Hi-Limit Sensor Bracket 13 Illus. No. Part No. Qty. Description 1 305007 1 Universal Sensor Bracket 2 130301 1 225º Hi-Limit Manual Reset Thermostat 3 153010 2 #6 Star Washer 4 152000 2 #6-32 Hex Nut 5 881354 2 Microprocessor Sensor Bracket Harness 6 150005 2 #6-32 x 1/4" Phillips Round Head Machine Screw Telephone: (508) 678-9000 Fax: (508) 678-9447
Summary of the content on the page No. 16
Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly 14 American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Summary of the content on the page No. 17
Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly 15 Illus. No. Part No. Qty. Description 1 100112 1 4L-610 V-Belt (to idler assembly) 2 100701 1 3/16" x 3/16" x 1" Key 3 101139 1 5/8" x 2-3/4" Motor Pulley (for 60 Hz Models Only) 101130 1 5/8" x 2-1/2" Motor Pulley (for 50 Hz Models Only) 4 150501 4 5/16-18 x 3/4" Hex Head Machine Bolt 5 153002 4 5/16" Lock Washer 6 153001 4 5/16" Flat Washer 7 100069 1 3/4 HP 120-230v 60 Hz 1Ø T.E.F.C. Motor with Plug (56Z Frame) 100068 1 3/4 HP 24
Summary of the content on the page No. 18
Direct Spark Ignition (DSI) Burner Assembly 16 American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Summary of the content on the page No. 19
Direct Spark Ignition (DSI) Burner Assembly 17 Illus. No. Part No. Qty. Description 1 318030 1 DSI Burner Shield 2 150300 2 #10 x 1/2" Hex Washer TEK Screw 3 150309 2 #10-16 x 1/2" Phillips Round Head Crimptite 4 128915 1 DSI Ignitor/Flame Probe Assembly 880134 1 Ignitor/Flame Probe Kit Assembly (includes illus. nos. 4 and 5) 5 880330 1 High V oltage (HV) Wire and Connector Assembly 6 150103 2 #8-32 x 1/2" Pan Head Machine Screw 7 153000 2 #8 Steel Burr 8 151001 2 #8-32 Pal Nut 9 141105 2 Large
Summary of the content on the page No. 20
Electric Oven Assembly 18 American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
