Summary of the content on the page No. 1
CD RECEIVER KD-S25
RECEPTOR CON CD KD-S25
For canceling the display demonstration, see page 4.
Para cancelar la demostración en pantalla, consulte la página 4.
For installation and connections, refer to the separate manual.
For customer Use:
Para la instalación y las conexiones, refiérase al manual separado.
Enter below the Model
No. and Serial No. which
are located on the top or
bottom of the cabinet. Retain
this information for future
INSTRUCTIONS
reference.
MANUAL DE INSTRUCCIONES
Mode
Summary of the content on the page No. 2
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates
Summary of the content on the page No. 3
How to reset your unit CONTENTS INTRODUCTIONS Preparation .................................................. 4 OPERATIONS Basic operations ........................................... 5 • Using the control panel ............................... 5 • Your preset adjustments will also be erased (except the • Using the remote controller (RM-RK50) ...... 6 registered Bluetooth device, see page 10). Listening to the radio ................................... 8 How to forcibly eject a disc Disc opera
Summary of the content on the page No. 4
Preparation Cancel the display demonstration and set the clock • See also page 22. Turn on the power. 1 Enter the PSM settings. 2 Cancel the display demonstrations 3 Select “DEMO,” then “DEMO OFF.” Set the clock Select “CLOCK HOUR,” then adjust the hour. Select “CLOCK MIN” (minute), then adjust the minute. Finish the procedure. 4 When the power is turned off: Check the current clock time When the power is turned on: Change the display information of the current source 1 FM/AM Station name *
Summary of the content on the page No. 5
Basic operations Using the control panel 1 • FM/AM: Select preset station. • BT-PHONE/BT-AUDIO: Select setting item/ • HD RADIO: Select channel. Registered device. • SIRIUS/XM: Select category. e Select “AUX IN” directly if an external component is • CD/CD-CH: Select folder. connected to the AUX (auxiliary) input jack. • IPOD: Enter the main menu/Pause playback/ r • Adjust the sound mode. Confirm selection. • Enter the PSM settings [Hold]. • BT-PHONE/BT-AUDIO: Enter/cancel Bluetooth t Ent
Summary of the content on the page No. 6
Display window 1 Status of Bluetooth device 7 Playback mode / item indicators— RND (random), (Device number, [1 – 5]; signal strength, [0 – 3]*; (disc), (folder), RPT (repeat) battery reminder, [0 – 3]*) 8 Tuner reception indicators—ST (stereo), * As the number increases, the signal/battery power MO (monaural) becomes stronger. 9 HOLD indicator 2 Tr (track) indicator p HD (HD Radio) indicator 3 Source display / Track number / Folder number / q LOUD (loudness) indicator Time countdown indic
Summary of the content on the page No. 7
7 • Searches for stations if pressed briefly. • Fast-forwards or reverses the track if pressed and held. • Changes the tracks if pressed briefly. • While listening to the satellite radio: – Changes the channels if pressed briefly. – Changes the channels rapidly if pressed and held. • While listening to an iPod (in menu selecting mode): – Selects an item if pressed briefly. (Then, press D ∞ to confirm the selection.) – Skips 10 items at a time if pressed and held. 1 • Turns the power
Summary of the content on the page No. 8
Listening to the radio Select “FM/AM.” 1 Select the bands. 2 Search for a station to listen—Auto Search. 3 Manual Search: Hold either one of the buttons until “M” flashes on the display, then press it repeatedly. • When receiving an FM stereo broadcast with sufficient signal strength, “ST” lights up on the display. When an FM stereo broadcast is Manual presetting hard to receive Ex.: Storing FM station of 92.50MHz into preset number 4 of the FM1 band. 1 Reception improves, but stereo effec
Summary of the content on the page No. 9
Disc operations All tracks will be played repeatedly until you change the To stop play and eject the disc source or eject the disc. • Press SRC to listen to another playback source. Prohibiting disc ejection To cancel the prohibition, repeat the same procedure. Pressing (or holding) the following buttons allows you After pressing M MODE, press the following buttons to... to... Skip 10 tracks [Press] Select track MP3/WMA: Within the same folder [Hold] Reverse/fast-forward track TRACK RPT: MP
Summary of the content on the page No. 10
Using the Bluetooth ® devices For Bluetooth operations, it is required to connect Registering using “OPEN” the Bluetooth Adapter (KS-BTA200) (separately Preparation: Operate the device to turn on its Bluetooth purchased) to the CD changer jack on the rear of this function. unit. 1 Select “BT-PHONE” or “BT-AUDIO.” • Refer also to the instructions supplied with the Bluetooth adapter and the Bluetooth device. • Refer to the list (included in the box) to check 2 Select “NEW DEVICE.” the countr
Summary of the content on the page No. 11
Connecting/disconnecting/deleting a 5 Use the Bluetooth device to search and registered device connect. On the device to be connected, enter the same 1 Select “BT-PHONE” or “BT-AUDIO.” PIN code you have just entered for this unit. “CONNECTED” appears on the display. Now connection is established and you can use the 2 Select a registered device you want to device through the unit. connect/disconnect/delete. The device remains registered even after you disconnect the device. Use “CONNECT“
Summary of the content on the page No. 12
Using the Bluetooth cellular phone Select “BT-PHONE.” 1 Enter Bluetooth menu. 2 Make a call or setting using the Bluetooth setting menu. 3 — (See the following and page 24.) When a call comes in.... 2 Call history: The source is automatically changed to “BT-PHONE.” 1 Select a call history (REDIAL*, RECEIVED*, MISSED*). When “AUTO ANSWER” is activated.... 2 Then select a name (if it is acquired) or phone The unit answers the incoming calls automatically, see number. page 24. • When “AUTO ANS
Summary of the content on the page No. 13
Using voice command Using the Bluetooth audio 1 player Select “BT-AUDIO.” “SAY NAME” appears on the display. If playback does not start automatically, operate the Bluetooth 2 Speak the name you want to call. audio player to start playback. • You can also use voice command from the Dial • Operate the Bluetooth audio player Menu. Select “VOICE DIAL” from the Dial Menu. to pause playback (if playback does • If your cellular phone does not support the voice not pause when you change the
Summary of the content on the page No. 14
Listening to the HD Radio ™ Broadcast Before operating, connect HD Radio tuner box, Searching for HD Radio stations KT-HD300 (separately purchased) to the CD changer only jack on the rear of the unit. 1 What is HD Radio Technology? HD Radio Technology can deliver high-quality digital 2 sound—AM digital will have FM-like quality (in stereo) and FM digital will have CD-like quality—with static- free and clear reception. Furthermore, stations can offer text and data, such as artist names a
Summary of the content on the page No. 15
Listening to the CD changer It is recommended to use a JVC MP3-compatible CD changer (separately purchased) with your unit. You can connect a CD changer to the CD changer jack on the rear of the unit. • You can only play conventional CDs (including CD Text) and MP3 discs. Preparation: Make sure “CHANGER” is selected for the external input setting, see page 23. Select “CD-CH.” 1 Select a disc to start playing. 2 [Press] For selecting disc number 1 – 6. [Hold] For selecting disc number 7 – 12. Af
Summary of the content on the page No. 16
Listening to the satellite radio Before operating, connect either one of the following (separately purchased) to the CD changer jack on the rear of this unit. • JVC SIRIUS Satellite radio interface, KS-SRA100, for listening to the SIRIUS Satellite radio. • JVC Smart Digital Adapter, XMDJVC100, for listening to the XM Satellite radio. GCI (Global Control Information) update • If channels are updated after subscription, updating starts automatically. “UPDATING” flashes and no sound can be heard.
Summary of the content on the page No. 17
Select “SIRIUS” or “XM.” 1 Select the bands. 2 SIRIUS: XM: Select a category. 3 SIRIUS: If you select “ALL,” you can tune in to all the channels of all categories. Select a channel to listen. 4 • Holding the button changes the channels rapidly. • While searching, invalid and unsubscribed channels are skipped. XM: If you do not select a channel within 15 seconds, category selected in step 3 is canceled. You can select all channels of all categories now (including non- categorised channels). Ch
Summary of the content on the page No. 18
Listening to the iPod Before operating, connect the Interface adapter for iPod, KS-PD100 (separately purchased) to the CD changer jack on the rear of the unit. Preparation: Make sure “CHANGER” is selected for the external input setting, see page 23. Select “IPOD.” 1 Select a song to start playing. 2 Selecting a track from the menu Pause/stop playback • To resume playback, press the button 1 Enter the main menu. again. [Press] Select tracks [Hold] Reverse/fast-forward track This mode will be
Summary of the content on the page No. 19
Listening to the other external components You can connect an external component to: • CD changer jack on the rear of this unit using the following adapters: – Line Input Adapter, KS-U57 (separately purchsed) – AUX Input Adapter, KS-U58 (separately purchsed) Preparation: Make sure “EXT INPUT” is selected for the external input setting, see page 23. • AUX (auxiliary) input jack on the control panel. Select “EXT IN” or “AUX IN.” 1 • If an external component has been connected to the AUX (auxili
Summary of the content on the page No. 20
Selecting a preset sound mode You can select a preset sound mode suitable to the music genre (iEQ: intelligent equalizer). Preset value setting for each sound mode Preset value Sound BASS (bass) MID (mid-range) TRE (treble) LOUD mode (loudness) Freq. Level Q Freq. Level Q Freq. Level Q USER 60 Hz00 Q1.01.0 kHz00Q1.257.5 kHz00Q1.25 ROCK 100 Hz+03 Q1.01.0 kHz00 Q1.2510.0 kHz+02 Q1.25 CLASSIC 80 Hz+01 Q1.01.0 kHz00 Q1.2510.0 kHz+03 Q1.25 OFF POPS 100 Hz+02 Q1.01.0 kHz+01 Q1.2510.0 kHz+02 Q1.25 HIP
