GE DNCK440GA user manual

Summary of the content on the page No. 1

GE Appliances
DNCK440EA/GA—GE Commercial Smart Card Electric Dryer
Dryer Dimensions (in inches)
Exhaust Options:
*24-1/2" from the edge of the side panel to the front.
23-1/2 25-3/4
Electric: 4-way via rear, right, left and bottom. Maximum recommended exhaust duct length
25-1/2" from front to edge of endcaps.
is 45 feet of 4” rigid ducting with two 90° elbows and a 4” dampered wall cap.
Gas: When viewed from the front of the unit, exhaust 3-way via rear, left and bottom.
25-1/2*
27
Maximum reco

Summary of the content on the page No. 2

GE Appliances DNCK440EA/GA—GE Commercial Smart Card Electric Dryer Features and Benefits • Super 7.0 Cu. Ft. Capacity • 3 Dry Cycles: High Heat; Medium Heat; Low Heat • 4 Heat Selections • Cool Down (with High Heat Cycle) • ESD Smart Card Reader with Alphanumeric Display and Control Card • Digital Cycle Countdown with LED Indicators • Quiet Package • Lockable Lint Filter • Reversable Door Swing ™ • DuraDrum Interior • Model DNCK440EAWC–White • Model DNCK440GAWC–White Specification Revised 2/02

Summary of the content on the page No. 3

GE Appliances DNCK440EA/GA—GE Commercial Smart Card Electric Dryer Dryer Exhausting Information—Use Metal Duct Only For complete information, see installation instructions packed with your dryer. Ducting Materials: Best Performance For best performance, this dryer should be vented with 4” diameter all rigid metal exhaust duct. If “all rigid metal” A Maximum Length of 4" Maximum Length of 4" A duct cannot be used, then “flexible all metal” venting can be used, but it will reduce the maximum recom