Summary of the content on the page No. 1
SUPER AD-30 Parts Manual
24 VAC Phase 5
1994 thru 2000
MODELS: ADG-30DS
ADE-30S
ADS-30S
American Dryer Corporation
88 Currant Road
Fall River, MA 02720-4781
Telephone: (508) 678-9000 / Fax: (508) 678-9447
E-mail: techsupport@amdry.com
www.amdry.com
091701WM/mcronan ADC Part No. 450144
Summary of the content on the page No. 2
Retain This Manual In A Safe Place For Future Reference American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble-free operation. ONLY qualified technicians should service this equipment. OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation/operator's manual included with the dryer. The following “FOR YOUR SAFETY” caution
Summary of the content on the page No. 3
Table of Contents Control Door Assembly Without Trim...................................................................................................... 3 High Security Control Door Assembly ..................................................................................................... 4 Phase 5 Coin Microprocessor Control Panel Assembly ........................................................................... 5 Phase 5 OPL Microprocessor Control Panel Assembly .......................
Summary of the content on the page No. 4
Plastic Door Front Panel Assembly ....................................................................................................... 26 Basket (Tumbler)/Support Assemblies ................................................................................................... 27 Basket (Tumbler) Bearing Assembly ................................................................................................ 28, 29 Idler Bearing Assembly ...........................................................
Summary of the content on the page No. 5
3 Control Door Assembly Without Trim For OPL (Non-Coin) Models Mfd. as of July 19, 1999 Illus. No. Part No. Qty. Description 1 881053 1 ADC Logo ONLY (with double adhesive tape) 870011 1 Logo Double Adhesive Tape Kit ONLY 2 883097* 1 Control Door (includes illus. nos. 2 and 3) 883120 1 Stainless Steel Control Door (includes illus. nos. 2 and 3) 3 117604 4 Neoprene Sponge Tape (sold by the foot) 4 150300 4 #10 x 1/2” Hex Washer TEK Screw 5 102603 1 Control Door Rod Support Catch 6 102601 1 Contro
Summary of the content on the page No. 6
4 High Security Control Door Assembly For ALL Coin Models and ONLY OPL Models Mfd. prior to July 19, 1999 Illus. No. Part No. Qty. Description 1 160015 1 High Security MK-100 Lock Assembly with Key (for Coin Models Only) 160104 1 MK-100 Key ONLY 160017 1 Special Dummy Lock ONLY (for Non-Coin Models Only) 2 160016 1 Lock Cam ONLY 3 881053 1 ADC Logo with Tape (for ALL Coin Models Only) 881052 1 Metal ADC Logo with Tape (for ALL OPL Models Only) 870011 1 Logo Double Tape Kit ONLY 4* 800023 1 High
Summary of the content on the page No. 7
5 Phase 5 Coin Microprocessor Control Panel Assembly Illus. No. Part No. Qty. Description 1 112526 1 Coin Keyboard Label Assembly 2 801213 1 Phase 5 Coin Control Panel Assembly (includes illus. nos. 1, 2, 4 through 6, and 11) 801229 1 Phase 5 Coin Control Panel Assembly with Battery Option (includes illus. nos. 1, 2, 4 through 6, and 11) 801259 1 Coin Control Panel ONLY 801258 1 Coin Control Panel with Battery Bracket 3 150309 1 #10-16 x 1/2" Hex Head TEK Crimptite Screw 4 137213 1 Phase 5 Coin
Summary of the content on the page No. 8
6 Phase 5 OPL Microprocessor Control Panel Assembly Illus. No. Part No. Qty. Description 1 112535 1 OPL English Keyboard Label Assembly 112276 1 OPL Stick-on Labels (English Only)...Not Illustrated 112275 1 OPL Stick-on Labels (Spanish, Italian, and Hebrew)...Not Illustrated 112277 1 3-Language OPL Stick-on Labels (English, Spanish, and Hebrew)...Not Illustrated 112278 1 5-Language OPL Stick-on Labels (Italian, Dutch, French, German, and Chinese)...Not Illustrated 2 801255 1 Phase 5 Microprocess
Summary of the content on the page No. 9
7 Phase 5 OPL and Coin Microprocessor Control Box Assembly Illus. No. Part No. Qty. Description 1 --------- 1 Transformer - 24 VAC (refer to Transformer Usage Listings on page 53 and page 54) 2 150300 2 #10 x 1/2" Hex Washer TEK Screw 3 120715 1 30-Position Terminal Block 4 150002 2 #6-32 x 1" Slotted Round Head Machine Screw 5 151000 2 #6-32 Pal Nut 6 136057 * 1/2-Amp (Slo Blo) Fuse 7 150301 * #8 x 7/16" Phillips Pan Head TEK Screw 8 136008 * Fuse Block/Strip ONLY 9 122641 1 15-Pin Microprocess
Summary of the content on the page No. 10
8 Coin Vault Assembly Illus. No. Part No. Qty. Description 1 802112 1 Microprocessor Coin Vault Assembly Complete (includes illus. nos. 1 through 6) 802117 1 Microprocessor Coin Vault ONLY 802110 1 Non-Microprocessor Coin Vault Assembly Complete (includes illus. nos. 1 through 6) 802115 1 Non-Microprocessor Coin Vault ONLY 2 160006 1 Cam for 1/4 Turn Lock ONLY 3 875061 1 1/4 Turn Lock with Key and Cam 160105* 1 1/4 Turn Mer-Pel Key ONLY 4 802020 1 1/4 Turn Coin Box Assembly (includes illus. nos.
Summary of the content on the page No. 11
9 Dual Timer “Tap Touch” Controls For Models Mfd. as of November 1, 2000 Illus. No. Part No. Qty. Description 1 824298 1 15 Minute Timer - 24 VAC 2 824299 1 60 Minute Timer - 24 VAC 3 824175 1 Red Pilot Light - 24 VAC 4 122301 1 “Tap Touch” Switch 5 131932 3 Relay SPST 24v 6 120730 1 30-Position Terminal Block 7 151000 6 #6-32 Pal Nut 8 882903 1 Dual Timer Panel Complete (includes illus. nos. 1 through 15) 850392 - Dual Timer Panel ONLY 9 153010 2 #6 Star Washer 10 152000 3 #6-32 Hex Nut 11 1502
Summary of the content on the page No. 12
10 Dual Timer Control Panel Assembly For Models Mfd. prior to November 1, 2000 Illus. No. Part No. Qty. Description 1 123005 1 Red Indicator Light - 24 VAC 2 122400 1 Rocker Heat Selector Switch 3 824015 1 Dual Timer Control Panel Assembly Complete - 24 VAC (includes illus. nos. 1 through 21) 800051 1 Dual Timer Control Panel ONLY 4 131917 1 Push-to-Start Relay - 24 VAC 5 150207 2 #10-24 x 1/2" Round Head Machine Screw 6 154001 2 #10-24 Speed Nut 7 152000 2 #6-32 Hex Nut 8 153010 2 #6 Star Washe
Summary of the content on the page No. 13
11 Dual Timer Control Box Assembly Illus. No. Part No. Qty. Description 1 122603 1 9-Pin Socket Connector 2 122701 9 Socket Terminal ONLY 122801 1 Pin/Socket Extraction Tool 3 315010 1 9-Pin Connector Bracket 4 150300 2 #10 x 1/2" Hex Washer TEK Screw 5 150300 2 #10 x 1/2" Hex Washer TEK Screw 6 --------- 1 Transformer - 24 VAC (refer to Transformer Usage Listings on page 53 and page 54) 7 150309 2 #10-16 x 1/2" Hex Head TEK Crimptite Screw 8 131931 1 Steam Valve Relay - 24 VAC (for Mechanical S
Summary of the content on the page No. 14
12 Non-Microprocessor Coin Meter Control Panel Assembly Illus. No. Part No. Qty. Description 1 123005 1 Red Indicator Light - 24 VAC 2 122400 1 Rocker Heat Selector Switch 3 824020 1 Coin Meter Control Panel Assembly Complete - 24 VAC (includes illus. nos. 1 through 6 and 8 through 12) 800054 1 Coin Meter Control Panel ONLY 4 131917 1 Push-to-Start Relay - 24 VAC 5 150207 2 #10-24 x 1/2" Round Head Machine Screw 6 154001 2 #10-24 Speed Nut 7* 125601 1 25¢ Coin Meter - 24 VAC (specify timing) 8 1
Summary of the content on the page No. 15
13 Non-Microprocessor Coin Meter Control Box Assembly Illus. No. Part No. Qty. Description 1 122603 1 9-Pin Socket Connector 2 122701 9 Socket Terminal ONLY 122801 1 Pin/Socket Extraction Tool 3 315010 1 9-Pin Connector Bracket 4 150300 2 #10 x 1/2" Hex Washer TEK Screw 5 150300 2 #10 x 1/2" Hex Washer TEK Screw 6 --------- 1 Transformer - 24 VAC (refer to Transformer Usage Listings on page 53 and page 54) 7 150309 2 #10-16 x 1/2" Hex Head TEK Crimptite Screw 8 131931 1 Steam Valve Relay - 24 VA
Summary of the content on the page No. 16
14 Slide Meter Case Assembly MAN1625 Illus. No. Part No. Qty. Description 1* 160199 1 Key ONLY for Slide Meter Lock 2 160099 1 Lock/Key/Cam and Hardware 3 125908 1 Slide Meter Accumulator - 24 VAC 4 152014 4 1/4-20 Free Spin Wash Nut 5 125900 1 Slide Meter Case ONLY with Door Less Locks 6 154203 6 1/4" Drive Rivet 7 801700 1 Slide Meter Extension ONLY with Mirror (includes illus. nos. 7 and 8) 8 315404 1 Stainless Steel Mirror ONLY 9 --------- 1 Typical Slide Meter Coin Chute (not available from
Summary of the content on the page No. 17
15 Slide Meter Control Box Illus. No. Part No. Qty. Description 1 132451 1 2-Pole Contactor - 24 VAC 2 150299 2 #10 x 1" Hex Head Screw 3 824828 1 RC Network with Connectors 4 150300 2 #10 x 1/2" Hex Washer TEK Screw 5 --------- 1 24 VAC Control Voltage Transformer (refer to Transformer Usage Listings on page 53 and page 54) 6 136057 * 1/2 Amp (Slo-Blo) Fuse 7 150301 * #8 x 7/16" Phillips Pan Head TEK Screw 8 136008 * Fuse Block/Strip ONLY 9 150002 2 #6-32 x 1" Round Head Machine Screw 10 120715
Summary of the content on the page No. 18
16 Coin Meter Replacement Parts Illus. No. Part No. Qty. Description 1 125541 1 1/60 RPM - 60 Hz Meter Motor - 24 VAC 125540 1 1/30 RPM - 50 Hz Meter Motor - 24 VAC 2 125500 1 2-Point Cam 125501 1 3-Point Cam 125502 1 4-Point Cam 125503 1 5-Point Cam 125504 1 6-Point Cam 125506 1 8-Point Cam 125507 1 9-Point Cam 125508 1 10-Point Cam 125510 1 12-Point Cam 3 125515 1 Meter Switch "B" with Arm 4 125516 2 Meter Switch "A" or "C" American Dryer Corporation 88 Currant Road / Fall River, MA 0272
Summary of the content on the page No. 19
17 Lint Trap Assembly Illus. No. Part No. Qty. Description 1 880914 1 Lint Trap Assembly Complete (includes illus. nos. 1 and 3 through 5) 880913 1 Lint Trap ONLY 2 154200 7 5/32" Pop Rivet 3 150300 3 #10 x 1/2" Hex Washer TEK Screw 4 304100 1 Lint Screen Hold Down 5 800500 2 Lint Screen ONLY 6 150419 2 #6 x 1/2" Tamperproof TEK Screw 7 108120 1 Chain For Drop Lint Door - 150418 1 Tamperproof Screw Hand Driver Telephone: (508) 678-9000 Fax: (508) 678-9447
Summary of the content on the page No. 20
18 Drop Lint Door Assembly Without Trim For OPL (Non-Coin) Models Mfd. as of July 19, 1999 Illus. No. Part. No. Qty. Description 1 800150 1 Knob Latch Kit Assembly (includes illus. nos. 1 and 2) 160001 1 AD-100 Lock Assembly with Key (for coin models Only) 160103 1 AD-100 Key ONLY 160003 1 Dummy Lock ONLY (for non-coin models) 160104 1 MK-100 Key ONLY (for dummy lock) 2 160008 1 Lock Cam For AD-100 and Dummy Lock 160009 1 Knob Latch Adjustable Cam ONLY 150425 1 #12-24 x 3/8" Round Head Machine S
