Summary of the content on the page No. 1
AD-75D II
Parts Manual
American Dryer Corporation
88 Currant Road
Fall River, MA 02720-4781
Telephone: (508) 678-9000 / Fax: (508) 678-9447
E-mail: techsupport@amdry.com
073100MFM/tcosta ADC Part No. 450432
Summary of the content on the page No. 2
Retain This Manual In A Safe Place For Future Reference American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble-free operation. ONLY qualified technicians should service this equipment. OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer. The following “FOR YOUR SAFETY” caution must be po
Summary of the content on the page No. 3
Table of Contents Control Door Assembly Without Trim For OPL (Non-Coin) Models Mfd. as of July 13, 1998 ........................................................................ 2 Control Door Assembly With Trim For ALL Coin Models and ONLY OPL Models Mfd. prior to July 13, 1998................................... 3 Phase 5 Coin Microprocessor Control Panel Assembly ...................................................................................... 4 Phase 5 OPL Microprocessor Control Panel Ass
Summary of the content on the page No. 4
2 Control Door Assembly Without Trim For OPL (Non-Coin) Models Mfd. as of July 13, 1998 Illus. No. Part No. Qty. Description 1 881053 1 ADC Logo ONLY (with double adhesive tape) 870011 1 Logo Double Tape Kit 2 881045* 1 Control Door (includes illus. nos. 2 and 3) 881046 1 Stainless Steel Control Door (includes illus. nos. 2 and 3) 3 117604 4 Neoprene Sponge Tape (sold by the foot) 4 150300 4 #10 x 1/2” Hex Washer TEK Screw 5 102603 1 Control Door Rod Support Catch 6 102601 1 Control Door Rod Ret
Summary of the content on the page No. 5
3 Control Door Assembly With Trim For ALL Coin Models and ONLY OPL Models Mfd. prior to July 13, 1998 Illus. No. Part No. Qty. Description 1 160015 1 High Security MK-100 Lock Assembly with Key (for coin models Only) 160017 1 Special Dummy Lock ONLY (for non-coin models Only) 160104 1 MK-100 Key ONLY (for dummy lock also) 2 160016 1 Lock Cam ONLY 3 112350 1 ADC Logo ONLY 870011 1 Logo Double Tape Kit 4 800020* 1 High Security Control Door Assembly (includes illus. nos. 4 through 7) 800144 1 Stai
Summary of the content on the page No. 6
4 Phase 5 Coin Microprocessor Control Panel Assembly Illus. No. Part No. Qty. Description 1 112526 1 Coin Keyboard Label Assembly 2 801213 1 Phase 5 Coin Control Panel Assembly (includes illus. nos. 1, 2, 4, 5, and 6) 801229 1 Phase 5 Coin Control Panel Assembly with Battery Option (includes illus. nos. 1, 2, 4, 5, and 6) 801259 1 Coin Control Panel ONLY 801258 1 Coin Control Panel ONLY with Battery Bracket 3 150309 1 #10-16 x 1/2” Hex Head TEK Crimptite Screw 4 137213 1 Phase 5 Coin Controller
Summary of the content on the page No. 7
5 Phase 5 OPL Microprocessor Control Panel Assembly Illus. No. Part No. Qty. Description 1 112535 1 OPL English Keyboard Label Assembly 112276 1 OPL Stick-On Labels (English Only) ... Not Illustrated 112275 1 OPL Stick-On Labels ... Not Illustrated (Spanish, Italian, and Hebrew) 112277 1 3-Language OPL Stick-On Labels ... Not Illustrated (English, Spanish, and Hebrew) 112278 1 5-Language OPL Stick-On Labels ... Not Illustrated (Italian, Dutch, French, German, and Chinese) 2 801255 1 Phase 5 Micr
Summary of the content on the page No. 8
6 Phase 5 Coin and OPL Microprocessor Control Box Assembly Illus. No. Part No. Qty. Description 1 141403 1 Transformer - 24 VAC (for ALL 120/208/240/380/416/480 volt gas and steam models) (for 380/416/480 volt electric models) 132070 1 Transformer - 24 VAC (for 208/240 volt electric models) 2 150300 2 #10 x 1/2” Hex Washer TEK Screw 3 120715 1 30-Position Terminal Block 4 150002 2 #6-32 x 1” Phillips Round Head Machine Screw 5 151000 2 #6-32 Pal Nut 6 136057 * 1/2-Amp (slo blo) Fuse ONLY 7 15030
Summary of the content on the page No. 9
7 Coin Vault Assembly Illus. No. Part No. Qty. Description 1 802112 1 Microprocessor Coin Vault Assembly Complete (includes illus. nos. 1 through 6) 802117 1 Microprocessor Coin Vault ONLY 2 160028 1 Cam For 1/4 Turn Lock ONLY 3 875061 1 1/4 Turn Lock with Key and Cam 160105* 1 1/4 Turn Mer-Pel Key ONLY 4 802020 1 1/4 Turn Coin Box Assembly (includes illus. nos. 2 through 5) 802019 1 1/4 Turn Coin Box ONLY without Face Plate 125915 1 High Security (Greenwald) Coin Box ONLY with Key 5 802018 1 1/
Summary of the content on the page No. 10
8 Dual Timer Control Panel Assembly For Models Mfd. prior to November 3, 2000 American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Summary of the content on the page No. 11
9 Dual Timer Control Panel Assembly For Models Mfd. prior to November 3, 2000 Illus. No. Part No. Qty. Description 1 123005 1 Red Indicator Light - 24 VAC 2 122400 1 Rocker Heat Selector Switch 3 824015 1 Dual Timer Control Panel Assembly Complete - 24 VAC (includes illus. nos. 1 through 21) 800051 1 Dual Timer Control Panel ONLY 4 131917 1 Push-to-Start Relay - 24 VAC 5 150207 2 #10-24 x 1/2” Phillips Pan Head Machine Screw 6 154001 2 #10-24 Speed Nut 7 152000 2 #6-32 Hex Nut 8 153010 2 #6 Star
Summary of the content on the page No. 12
10 Dual Timer “Tap Touch” Controls For Models Mfd. as of November 3, 2000 Illus. No. Part No. Qty. Description 1 124030 1 15 Minute Timer - 24 VAC 2 124025 1 60 Minute Timer - 24 VAC 3 824175 1 Red Pilot Light - 24 VAC 4 122301 1 “Tap Touch” Switch 5 131932 3 Relay SPST 24v 6 120730 1 30-Position Terminal Block 7 151000 6 #6-32 Pal Nut 8 882903 1 Dual Timer Panel Complete (includes illus. nos. 1 through 15) 850392 - Dual Timer Panel ONLY 9 153010 2 #6 Star Washer 10 152000 3 #6-32 Hex Nut 11 150
Summary of the content on the page No. 13
11 Dual Timer Control Box Assembly Illus. No. Part No. Qty. Description 1 122603 1 9-Pin Socket Connector 2 122701 8 Socket Terminal ONLY 122801 1 Pin/Socket Extraction Tool 3 315010 1 9-Pin Connector Bracket 4 150300 2 #10 x 1/2” Hex Washer TEK Screw 5 150300 2 #10 x 1/2” Hex Washer TEK Screw 6 141403 1 Transformer - 24 VAC (for ALL 120/208/240/380/416/480 volt gas and steam models) (for 380/416/480 volt electric models) 132070 1 Transformer - 24 VAC (for 208/240 volt electric models) 7 136008
Summary of the content on the page No. 14
12 “Plastic” Door Front Panel Assembly Illus. No. Part No. Qty. Description 1 875302* 1 Right Hand Insulated Front Panel Assembly Complete (includes illus. nos. 1, 2, 3, and 6) 875313 1 Stainless Steel Right Hand Insulated Front Panel Assembly Complete (includes illus. nos. 1, 2, 3, and 6) 2 154215 2 5/32 x 1/4” Rivet 3 170330 1 Friction Door Latch 4 150300 1 #10 x 1/2” Hex Washer TEK Screw 5 150313 8 #10-16 x 1/2” TORX-Plus BTN, Type 1 (for models mfd. as of October 2, 2000) 150309 8 #10-16 x 1
Summary of the content on the page No. 15
13 Cold Rolled Steel (CRS) Door Front Panel Illus. No. Part No. Qty. Description 1 881273* 1 Front Panel Assembly (cold rolled steel [CRS] door) (includes illus. nos. 1 through 3) 881289 1 Stainless Steel Front Panel Assembly (cold rolled steel [CRS] door) (includes illus. nos. 1 through 3) 2 154215 2 5/32 x 1/4” Rivet 3 170330 1 Friction Door Latch 4 150300 1 #10 x 1/2” Hex Washer TEK Screw 5 150313 8 #10-16 x 1/2” TORX-Plus BTN, Type 1 (for models mfd. as of October 2, 2000) 150309 8 #10-16 x
Summary of the content on the page No. 16
14 “Plastic” Door Main Door Switch Housing Illus. No. Part No. Qty. Description 1 152013 2 #6-32 Hex Nut 1/4” ATF Zinc Plated 2 153008 2 #6 Lock Washer 3 137005 1 Single-Pole Door Switch (SDS) 4 121028 2 Insulated Terminal ONLY 5 154281 2 3/8” Standard Nylon Spacer 6 800448 1 12-1/2” Stainless Steel Main Door Hinge Assembly (includes illus. nos. 6 and 7) 7 153565 2 #6-32 x 1” Self Clinching Stud 8 313218 1 Main Door Switch Housing 9 150201 2 #10-32 x 1/4” Phillips Pan Head TEK Screw 10 121405 1
Summary of the content on the page No. 17
15 Main Door Switch Assembly Cold Rolled Steel (CRS) Door Illus. No. Part No. Qty. Description 1 153566 2 #6-32 x 7/8” Clinch Stud 2 152013 2 #6-32 Hex Nut 1/4” ATF Zinc Plated 3 153010 2 #6 Star Washer 4 137005 1 Single-Pole Door Switch (SDS) 5 122636 2 Flag Terminal 6 881211 1 Main Door Switch Housing 7 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw Telephone: (508) 678-9000 Fax: (508) 678-9447
Summary of the content on the page No. 18
16 Cold Rolled Steel (CRS) Main Door Assembly American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Summary of the content on the page No. 19
17 Cold Rolled Steel (CRS) Main Door Assembly Illus. No. Part No. Qty. Description 1 881150 1 Black Main Door Assembly Complete (includes illus. nos. 1, 2, and 8 through 15) 881207 1 Stainless Steel Main Door Assembly Complete (includes illus. nos. 1, 2, and 8 through 15) 2 102354 1 Door Gasket 170730 1 Clear Glass and Gasket Adhesive (10.3 oz. cartridge) 170731 1 Black Glass and Gasket Adhesive (10.3 oz. cartridge) 3 881152 1 Black Top Hinge Block Assembly (includes illus. nos. 3 and 4) 881208
Summary of the content on the page No. 20
18 “Plastic” Main Door Assembly Illus. No. Part No. Qty. Description 1 881421 1 Gray Plastic Main Door Assembly Complete with Mechanical Fasteners (includes illus. nos. 1 and 5 through 9) 2 800448 4 12-1/2” Stainless Steel Main Door Hinge Assembly 3 150410 4 #10-24 x 3/8” Phillips Pan Head Taptite Screw 4 152014 4 1/4-20 Free Spin Wash Nut 5 102349 1 Main Door Gasket 6 102212 1 20-7/16” Door Glass with (4) Holes 170730 1 Clear Glass and Gasket Adhesive (10.3 oz. cartridge) 7 150448 4 1/2” Stainl
