Kenwood SC300 user manual

Summary of the content on the page No. 1

Instruction manual
Model SC300
Model SC400

Summary of the content on the page No. 2

IMPORTANT INFORMATION PLEASE READ THESE INSTRUCTIONS CAREFULLY Before using the appliance read the instructions carefully. The appliance is equipped with a thermostat that limits temperature, a thermofuse and a safety cap. It has been made in compliance with Australian Standards. Always connect the appliance to an earthed socket. Never leave the appliance unattended when still connected to the power supply source. Never turn the appliance over when using steam. Always take the plug out of

Summary of the content on the page No. 3

Model SC300 DESCRIPTION OF THE APPLIANCE A Floorcloth B Main part of the appliance C On/Off switch D Safety Filling Cap E On/Off pilot light F Power cable GTelescopic tube H 165ml measuring cup I Funnel L Preheating/cool down stand L

Summary of the content on the page No. 4

INSTRUCTIONS FOR USE MODEL SC300 Using KENWOOD STEAM MOP is really very simple: 1. After having taken the appliance out of its box, screw the telescopic tube onto the main part of the appliance (Fig.1). Then turn the two ends and pull them out to the desired length. Lock the upper part by turning clockwise (Figs 1a-1b). 2. Secure the cable onto the hook at the top of the tube (Fig.2). 3. Rest the base of KENWOOD STEAM MOP on the floorcloth, secure the floor cloth to the KENWOOD STEAM MOP usi

Summary of the content on the page No. 5

Model SC400 DESCRIPTION OF THE APPLIANCE A Floorcloth B Main part of the appliance H I C On/Off switch D Safety Filling Cap E On/Off pilot light L FWater exhaustion light G Power cable F HTelescopic tube E D I 165ml measuring cup C L Funnel B G M Preheating/cool down stand A M Fig. 1 Fig. 3 Fig. 2 Fig. 4 Fig. 5 Fig. 6 Fig. 7

Summary of the content on the page No. 6

INSTRUCTIONS FOR USE MODEL SC400 Using KENWOOD STEAM MOP is really very simple: 1. Once the appliance has been unpacked, fit the extension tube in the appliance’s body and then extend it to the desired length (fig. 1). 2. Fix the top part of the tube by turning it in a clockwise direction (fig. 2). 3. Fix the cord into the hook which is provided along the tube (fig. 3) 4. Rest the base of KENWOOD STEAM MOP on the floorcloth, secure the floor cloth to the KENWOOD STEAM MOP using the Velcro str

Summary of the content on the page No. 7

HAGEMEYER AUSTRALASIA B.V. 104 Vanessa street Kingsgrove LIMITED NSW 2208 New Lane. Havant. Hants. P09 2NH Ph: (02) 93.70.88.77 cod. 5085101900 rev. 0 del 20/05/02