Summary of the content on the page No. 1
TM
Model SC300
BEFORE USE – PLEASE READ THE MANUAL
AND SAFETY INSTRUCTIONS.
Please retain for future reference.
Summary of the content on the page No. 2
Thank you for purchasing your Earlex SteamStation SC300, we hope you enjoy using it. Please read the manual carefully to get the most out of your product. 2 6 7 8 1 3 13 9 5 8a 12 11 10 4 Pack contents: • Please note that some accessories are 1 - SC300 2 - Jug stored at the front of the product under 3 - Funnel the lifting section. 4 - Towel Read the instruction booklet before using 5 - Straight Adaptor the SC300 and make sure that… 6 - Steam Cap 7 - Extension Wands 8 - Floor
Summary of the content on the page No. 3
Safety Instructions - CAUTION • Be careful of overload water dripping down • Do not drag or try to move boiler by pulling when working on the ceiling. either the hose or the mains lead. • Do not direct steam at people, animals or at • Do not operate with a damaged cord, keep electrical devices. feet and all parts of body away from the jet of steam. Do not operate machine in bare • Do not operate machine without water in the feet or when wearing open toe shoes or tank. sandals. • Do not al
Summary of the content on the page No. 4
Warning - Risk of injury Caution! - Steam 100˚C - Don’t direct at people or animals Cleaning Fabrics: A number of materials and fabrics are NOT suitable to be cleaned by steam for example: Do not ® use on leather, wax polished furniture or floors, synthetic fabrics, velvet, Dralon or other delicate, steam-sensitive materials. Cleaning Glass/Mirrors: Thermal shock can shatter glass. Before cleaning glass surfaces, carefully warm the surface by directing the steam jet on the glass from a distance
Summary of the content on the page No. 5
How to put your SC300 together Handle Steam Plate Extension wands x 2 Swivel-adaptor Straight Adaptor - Please note that these attachments slide onto the Floor brush/mop straight adaptor (do not tool twist) Towel grips Angle and Plastic brushes Window/tile cleaner Towel 5
Summary of the content on the page No. 6
Cleaning Floors Instructions for Use 2 6 7 8 1 • Make sure the machine is unplugged from 3 the electrical outlet. 13 9 • Unscrew the safety cap (6) by turning 5 anti-clockwise. Please note the cap cannot be unscrewed 8a when the unit is pressurized. • Using the measuring jug (2) and funnel (3) fill 12 11 10 4 the machine up to 1200ml of water. This should be sufficient to steam clean for approximately 30 minutes. • Once full, replace the safety cap by turning clockwise and fasten tightly. •
Summary of the content on the page No. 7
How to use the handle A. Press the button in to attach the straight adapter or the extension tubes. A B. Squeeze the trigger on the handle for steam. C. Lock the trigger for constant steam. B C How to use the nozzles • The angled nozzle and the brush tool can be used to get into awkward corners that are normally difficult to clean. • Use the brush tool to scrub and loosen stubborn dirt from hard surfaces. • Use the window/tile cleaner to clean grime from tiles and windows. • To use these to
Summary of the content on the page No. 8
• Attach the floor brush to the extension wands, which snap together. Then attach the extension wand to the steam gun. Do ensure the extension wands are firmly connected. • Before cleaning always remove dust from the surface you wish to clean. • To release the extension wands depress the button on the hose connection. Cleaning floors & carpets with cleaning cloth. • While the machine is switched off attach the cleaning cloth to the floor brush via the spring-loaded clips, Make sure the edg
Summary of the content on the page No. 9
instructions for Steam Plate use (item 12). Ca ut io n Item 12 is used in conjunction with Steam Gun Before using the Steam Plate Accessory (Item (item 13) or fitted to (item 7) Extension Wands. 12) with your SC300 please check the following: note when using this accessory it is not necessary to keep waiting for the orange • Check the state of your plaster before starting light to go off as there is sufficient steam work. pressure available for most stripping and removal operations (approximat
Summary of the content on the page No. 10
notes 10
Summary of the content on the page No. 11
notes 11
Summary of the content on the page No. 12
Technical data • I cannot remove the Pressure Cap • 2.5 metre power cord Make sure that you have fully de-pressurized • Water capacity - 1200ml the Boiler. See section ‘Refilling the water • Steam-up time – up to 7-8 minutes tank’. depending on volume of water • Steam flow is erratic; sometimes it • Working time – 30 minutes • Tank material - Stainless Steel works well, other times it does not • Power - 1500W If you have not used distilled or deioniz
